A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').

As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."

As such enable this even when using 32-bit kernels.
Reported-by: NIan Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NPrashant Sreedharan <prashant@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Memtest is a simple feature which fills the memory with a given set of
patterns and validates memory contents, if bad memory regions is detected
it reserves them via memblock API.  Since memblock API is widely used by
other architectures this feature can be enabled outside of x86 world.

This patch set promotes memtest to live under generic mm umbrella and
enables memtest feature for arm/arm64.

It was reported that this patch set was useful for tracking down an issue
with some errant DMA on an arm64 platform.

This patch (of 6):

There is nothing platform dependent in the core memtest code, so other
platforms might benefit from this feature too.

[linux@roeck-us.net: MEMTEST depends on MEMBLOCK]
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes the "offset2lib" weakness in ASLR for arm, arm64, mips,
powerpc, and x86.  The problem is that if there is a leak of ASLR from
the executable (ET_DYN), it means a leak of shared library offset as
well (mmap), and vice versa.  Further details and a PoC of this attack
is available here:

  http://cybersecurity.upv.es/attacks/offset2lib/offset2lib.html

With this patch, a PIE linked executable (ET_DYN) has its own ASLR
region:

  $ ./show_mmaps_pie
  54859ccd6000-54859ccd7000 r-xp  ...  /tmp/show_mmaps_pie
  54859ced6000-54859ced7000 r--p  ...  /tmp/show_mmaps_pie
  54859ced7000-54859ced8000 rw-p  ...  /tmp/show_mmaps_pie
  7f75be764000-7f75be91f000 r-xp  ...  /lib/x86_64-linux-gnu/libc.so.6
  7f75be91f000-7f75beb1f000 ---p  ...  /lib/x86_64-linux-gnu/libc.so.6
  7f75beb1f000-7f75beb23000 r--p  ...  /lib/x86_64-linux-gnu/libc.so.6
  7f75beb23000-7f75beb25000 rw-p  ...  /lib/x86_64-linux-gnu/libc.so.6
  7f75beb25000-7f75beb2a000 rw-p  ...
  7f75beb2a000-7f75beb4d000 r-xp  ...  /lib64/ld-linux-x86-64.so.2
  7f75bed45000-7f75bed46000 rw-p  ...
  7f75bed46000-7f75bed47000 r-xp  ...
  7f75bed47000-7f75bed4c000 rw-p  ...
  7f75bed4c000-7f75bed4d000 r--p  ...  /lib64/ld-linux-x86-64.so.2
  7f75bed4d000-7f75bed4e000 rw-p  ...  /lib64/ld-linux-x86-64.so.2
  7f75bed4e000-7f75bed4f000 rw-p  ...
  7fffb3741000-7fffb3762000 rw-p  ...  [stack]
  7fffb377b000-7fffb377d000 r--p  ...  [vvar]
  7fffb377d000-7fffb377f000 r-xp  ...  [vdso]

The change is to add a call the newly created arch_mmap_rnd() into the
ELF loader for handling ET_DYN ASLR in a separate region from mmap ASLR,
as was already done on s390.  Removes CONFIG_BINFMT_ELF_RANDOMIZE_PIE,
which is no longer needed.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NHector Marco-Gisbert <hecmargi@upv.es>
Cc: Russell King <linux@arm.linux.org.uk>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: "David A. Long" <dave.long@linaro.org>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Arun Chandran <achandran@mvista.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Min-Hua Chen <orca.chen@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Vineeth Vijayan <vvijayan@mvista.com>
Cc: Jeff Bailey <jeffbailey@google.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Behan Webster <behanw@converseincode.com>
Cc: Ismael Ripoll <iripoll@upv.es>
Cc: Jan-Simon Mller <dl9pf@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When an architecture fully supports randomizing the ELF load location,
a per-arch mmap_rnd() function is used to find a randomized mmap base.
In preparation for randomizing the location of ET_DYN binaries
separately from mmap, this renames and exports these functions as
arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE
for describing this feature on architectures that support it
(which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390
already supports a separated ET_DYN ASLR from mmap ASLR without the
ARCH_BINFMT_ELF_RANDOMIZE_PIE logic).
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Russell King <linux@arm.linux.org.uk>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: "David A. Long" <dave.long@linaro.org>
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Arun Chandran <achandran@mvista.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Min-Hua Chen <orca.chen@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Vineeth Vijayan <vvijayan@mvista.com>
Cc: Jeff Bailey <jeffbailey@google.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Behan Webster <behanw@converseincode.com>
Cc: Ismael Ripoll <iripoll@upv.es>
Cc: Jan-Simon Mller <dl9pf@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement huge KVA mapping interfaces on x86.

On x86, MTRRs can override PAT memory types with a 4KB granularity.  When
using a huge page, MTRRs can override the memory type of the huge page,
which may lead a performance penalty.  The processor can also behave in an
undefined manner if a huge page is mapped to a memory range that MTRRs
have mapped with multiple different memory types.  Therefore, the mapping
code falls back to use a smaller page size toward 4KB when a mapping range
is covered by non-WB type of MTRRs.  The WB type of MTRRs has no affect on
the PAT memory types.

pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a
given range is covered by MTRRs.  MTRR_TYPE_WRBACK indicates that the
range is either covered by WB or not covered and the MTRR default value is
set to WB.  0xFF indicates that MTRRs are disabled.

HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set.
 X86_32 without X86_PAE is not supported since such config can unlikey be
benefited from this feature, and there was an issue found in testing.

[fengguang.wu@intel.com: ioremap_pud_capable can be static]
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We would want to use number of page table level to define mm_struct.
Let's expose it as CONFIG_PGTABLE_LEVELS.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various recent BIOSes support NVDIMMs or ADR using a
non-standard e820 memory type, and Intel supplied reference
Linux code using this type to various vendors.

Wire this e820 table type up to export platform devices for the
pmem driver so that we can use it in Linux.

Based on earlier work from:

   Dave Jiang <dave.jiang@intel.com>
   Dan Williams <dan.j.williams@intel.com>

Includes fixes for NUMA regions from Boaz Harrosh.
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-nvdimm@ml01.01.org
Link: http://lkml.kernel.org/r/1427872339-6688-2-git-send-email-hch@lst.de
[ Minor cleanups. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

ACPI 5.1 does not currently support S states for ARM64 hardware but
ACPI code will call acpi_target_system_state() and acpi_sleep_init()
for device power management, so introduce
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT and select it for x86 and
ia64 only to make sleep functions available, and also introduce stub
function to allow other drivers to function until S states are defined
for ARM64.

It will be no functional change for x86 and IA64.
Suggested-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NGraeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: NTomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Fix typos and also make it simpler without losing the gist of what it says.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/1426251877-11415-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The commit 8bbc2a13 ("x86/intel/quark: Add Intel Quark
platform support") introduced a minimal support of Intel Quark
SoC. That allows to use core parts of the SoC. However, the SPI,
I2C, and GPIO drivers can't be selected by kernel configuration
because they depend on COMMON_CLK. The patch adds a COMMON_CLK
selection to the platfrom definition to allow user choose the drivers.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NOng, Boon Leong <boon.leong.ong@intel.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Darren Hart <dvhart@linux.intel.com>
Fixes: 8bbc2a13 ("x86/intel/quark: Add Intel Quark platform support")
Link: http://lkml.kernel.org/r/1425569044-2867-1-git-send-email-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It's a bit pointless to allow Kconfig configuration for 1GB kernel
mappings, it's already hidden behind a 'default y' and CONFIG_EXPERT.

Remove this complication and simplify the code by renaming
CONFIG_ENABLE_DIRECT_GBPAGES to CONFIG_X86_DIRECT_GBPAGES and
document the DEBUG_PAGE_ALLOC and KMEMCHECK quirks.

Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: JBeulich@suse.com
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: julia.lawall@lip6.fr
Signed-off-by: NIngo Molnar <mingo@kernel.org>

direct_gbpages can be force enabled as an early parameter
but not really have taken effect when DEBUG_PAGEALLOC
or KMEMCHECK is enabled. You can also enable direct_gbpages
right now if you have an x86_64 architecture but your CPU
doesn't really have support for this feature. In both cases
PG_LEVEL_1G won't actually be enabled but direct_gbpages is used
in other areas under the assumptions that PG_LEVEL_1G
was set. Fix this by putting together all requirements
which make this feature sensible to enable under, and only
enable both finally flipping on PG_LEVEL_1G and leaving
PG_LEVEL_1G set when this is true.

We only enable this feature then to be possible on sensible
builds defined by the new ENABLE_DIRECT_GBPAGES. If the
CPU has support for it you can either enable this by using
the DIRECT_GBPAGES option or using the early kernel parameter.
If a platform had support for this you can always force disable
it as well.
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: JBeulich@suse.com
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: julia.lawall@lip6.fr
Link: http://lkml.kernel.org/r/1425518654-3403-3-git-send-email-mcgrof@do-not-panic.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add Intel Quark platform support. Quark needs to pull down all
unlocked IMRs to ensure agreement with the EFI memory map post
boot.

This patch adds an entry in Kconfig for Quark as a platform and
makes IMR support mandatory if selected.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Suggested-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: NOng, Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: NAndy Shevchenko <andy.schevchenko@gmail.com>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Reviewed-by: NOng, Boon Leong <boon.leong.ong@intel.com>
Cc: dvhart@infradead.org
Link: http://lkml.kernel.org/r/1422635379-12476-3-git-send-email-pure.logic@nexus-software.ieSigned-off-by: NIngo Molnar <mingo@kernel.org>

We don't really need a helper symbol for that. For one, it's
pointlessly getting set to Y for all configurations (even 64-bit
ones). And then the purpose can be fulfilled by suitably
adjusting X86_UP_APIC: Hide its prompt when PCI_MSI, and default
it to PCI_MSI.
Tested-by: NBryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/54D39AFC020000780005D684@mail.emea.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Since dependencies are transitive, we don't really need to
repeat those of X86_UP_IOAPIC.

Furthermore avoid the symbol getting entered into .config when
it is off by having the default simply Y and the dependencies
solely handled via the intended for that purpose "depends on".
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/54D39BC9020000780005D688@mail.emea.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Settings without prompts shouldn't normally have defaults other
than Y, as otherwise they (a) needlessly enlarge the resulting
.config and (b) if they ever get a prompt added later, the
tracked setting of off will prevent the devloper from then being
prompted for his/her choice when doing an incremental update of
the configuration (make oldconfig).
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/54D39CC6020000780005D6AE@mail.emea.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds arch specific code for kernel address sanitizer.

16TB of virtual addressed used for shadow memory.  It's located in range
[ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup
stacks.

At early stage we map whole shadow region with zero page.  Latter, after
pages mapped to direct mapping address range we unmap zero pages from
corresponding shadow (see kasan_map_shadow()) and allocate and map a real
shadow memory reusing vmemmap_populate() function.

Also replace __pa with __pa_nodebug before shadow initialized.  __pa with
CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr)
__phys_addr is instrumented, so __asan_load could be called before shadow
area initialized.
Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: NAndrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jim Davis <jim.epost@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This new feature is to interpret AMD specific ACPI device to
platform device such as I2C, UART, GPIO found on AMD CZ and
later chipsets. It based on example intel LPSS. Now, it can
support AMD I2C, UART and GPIO.
Signed-off-by: NKen Xue <Ken.Xue@amd.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Rename CONFIG_LIVE_PATCHING to CONFIG_LIVEPATCH to make the naming of
the config and the code more consistent.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 30b8b006 "init: Get rid of x86isms" broke the UP boot on
x86_64. That happens because CONFIG_UP_LATE_INIT depends on
CONFIG_X86_UP_APIC. X86_UP_APIC is a 32bit only config switch and
therefor not set on 64bit UP builds. As a consequence the UP init of
the local APIC and the IOAPIC is not called, which results in a boot
failure.

Make it depend on !SMP && X86_LOCAL_APIC instead.

Fixes: 30b8b006 init: Get rid of x86isms
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Commit 0dbc6078 ('x86, build, pci: Fix PCI_MSI build on !SMP')
introduced the dependency that X86_UP_APIC is only available when
PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit
UP systems because it disables both APIC and IO-APIC. But APIC support
is architecturally required for PCI_MSI.

The intention of the patch was to enforce APIC support when PCI_MSI is
enabled, but failed to do so.

Remove the !PCI_MSI dependency from X86_UP_APIC and enforce
X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems.

[ tglx: Massaged changelog ]

Fixes 0dbc6078 'x86, build, pci: Fix PCI_MSI build on !SMP'
Signed-off-by: NBryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The UP local API support can be set up from an early initcall. No need
for horrible hackery in the init code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Change ARCH_HAVE_LIVE_PATCHING to HAVE_LIVE_PATCHING in Kconfigs. HAVE_
bools are prevalent there and we should go with the flow.
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMiroslav Benes <mbenes@suse.cz>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.

The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.

If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.

   text    data     bss     dec     hex filename
   2007       0       0    2007     7d7 kernel/rcu/srcu.o

Size of arch/powerpc/boot/zImage changes from

   text    data     bss     dec     hex filename
 831552   64180   23944  919676   e087c arch/powerpc/boot/zImage : before
 829504   64180   23952  917636   e0084 arch/powerpc/boot/zImage : after

so the savings are about ~2000 bytes.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]

This commit introduces code for the live patching core.  It implements
an ftrace-based mechanism and kernel interface for doing live patching
of kernel and kernel module functions.

It represents the greatest common functionality set between kpatch and
kgraft and can accept patches built using either method.

This first version does not implement any consistency mechanism that
ensures that old and new code do not run together.  In practice, ~90% of
CVEs are safe to apply in this way, since they simply add a conditional
check.  However, any function change that can not execute safely with
the old version of the function can _not_ be safely applied in this
version.

[ jkosina@suse.cz: due to the number of contributions that got folded into
  this original patch from Seth Jennings, add SUSE's copyright as well, as
  discussed via e-mail ]
Signed-off-by: NSeth Jennings <sjenning@redhat.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Reviewed-by: NPetr Mladek <pmladek@suse.cz>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Now we have splitted functions to support MSI and HT_IRQ into vector.c,
and they have no dependency on IOAPIC any more. So change Kconfig files
to make MSI and HT_IRQ independent of X86_IO_APIC.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1414397531-28254-16-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Create arch/x86/kernel/apic/vector.c to host local APIC related code,
prepare for making MSI/HT_IRQ independent of IOAPIC.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Grant Likely <grant.likely@linaro.org>
Link: http://lkml.kernel.org/r/1414397531-28254-10-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Give MPX a real config option. The CPUs that support it (referenced
here):

  https://software.intel.com/en-us/forums/topic/402393

are not available publicly yet. Right now only the software emulator
provides MPX for the general public.

[ tglx: Make it default off. There is no point in having it on right
        now as no hardware and no proper tooling support are available ]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20141212183836.2569D58D@viggo.jf.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.

set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have chosen to perform the allocation of bounds tables in
kernel (See the patch "on-demand kernel allocation of bounds
tables") and to mark these VMAs with VM_MPX.

However, there is currently no suitable interface to actually do
this.  Existing interfaces, like do_mmap_pgoff(), have no way to
set a modified ->vm_ops or ->vm_flags and don't hold mmap_sem
long enough to let a caller do it.

This patch wraps mmap_region() and hold mmap_sem long enough to
make the modifications to the VMA which we need.

Also note the 32/64-bit #ifdef in the header.  We actually need
to do this at runtime eventually.  But, for now, we don't support
running 32-bit binaries on 64-bit kernels.  Support for this will
come in later patches.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20141114151827.CE440F67@viggo.jf.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Because we're all human and typing sucks..

Fixes: 7fb0f1de ("perf/x86: Fix compile warnings for intel_uncore")
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/n/tip-be0bftjh8yfm4uvmvtf3yi87@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This adds CONFIG_X86_VSYSCALL_EMULATION, guarded by CONFIG_EXPERT.
Turning it off completely disables vsyscall emulation, saving ~3.5k
for vsyscall_64.c, 4k for vsyscall_emu_64.S (the fake vsyscall
page), some tiny amount of core mm code that supports a gate area,
and possibly 4k for a wasted pagetable.  The latter is because the
vsyscall addresses are misaligned and fit poorly in the fixmap.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/406db88b8dd5f0cbbf38216d11be34bbb43c7eae.1414618407.git.luto@amacapital.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The uncore drivers require PCI and generate compile time warnings when
!CONFIG_PCI.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented
_PAGE_NUMA using _PROT_NONE.  This saved using an additional PTE bit and
relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting
fault scanner.  This was found to be conceptually confusing with a lot of
implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the
PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE
bits and shrunk the maximum possible swap size but it did not go far
enough.  There are no architectures that reuse _PROT_NONE as _PROT_NUMA
but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary
duplication in powerpc vs the generic implementation by defining the types
the core NUMA helpers expected to exist from x86 with their ppc64
equivalent.  This necessitated that a PTE bit mask be created that
identified the bits that distinguish present from NUMA pte entries but it
is expected this will only differ between arches based on _PAGE_PROTNONE.
The naming for the generic helpers was taken from x86 originally but ppc64
has types that are equivalent for the purposes of the helper so they are
mapped instead of duplicating code.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Makes the IOSF sideband available through debugfs. Allows
developers to experiment with using the sideband to provide
debug and analytical tools for units on the SoC.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1411017231-20807-4-git-send-email-david.e.box@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Adds better description of IOSF driver to determine when it
should be enabled. Also moves the Kconfig option to "Processor
type and features" menu from main configuration menu.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1411017231-20807-3-git-send-email-david.e.box@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It used to be an ad-hoc hack defined by the x86 version of
<asm/bitops.h> that enabled a couple of library routines to know whether
an integer multiply is faster than repeated shifts and additions.

This just makes it use the real Kconfig system instead, and makes x86
(which was the only architecture that did this) select the option.

NOTE! Even for x86, this really is kind of wrong.  If we cared, we would
probably not enable this for builds optimized for netburst (P4), where
shifts-and-adds are generally faster than multiplies.  This patch does
*not* change that kind of logic, though, it is purely a syntactic change
with no code changes.

This was triggered by the fact that we have other places that really
want to know "do I want to expand multiples by constants by hand or
not", particularly the hash generation code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y.  But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large.  This option seems
to be available only gcc 4.4 onwards.

Hiding new functionality behind a new config option will not break
existing users of old gcc.  Those who wish to enable new functionality
will require new gcc.  Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.

I think there are other advantages of introducing this new config
option.  As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used.  This
new code selects CRYPTO=y and CRYPTO_SHA256=y.  And all other arches had
to do this for CONFIG_KEXEC.  Now with introduction of new config
option, we can remove crypto dependency from other arches.

Now CONFIG_KEXEC_FILE is available only on x86_64.  So whereever I had
CONFIG_X86_64 defined, I got rid of that.

For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y".  This should be safer as "select" is not
recursive.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: NShaun Ruffell <sruffell@digium.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes an error in having the iosf build as 'default m'. On X86 SoC's the iosf
sideband is the only way to access information for some registers, as opposed to
through MSR's on other Intel architectures. While selecting IOSF_MBI is
preferred, it does mean carrying extra code on non-SoC architectures. This
exports the selection to the user, allowing those driver writers to compile out
iosf code if it's not being built.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1409175640-32426-2-git-send-email-david.e.box@linux.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The table mapping CPUID bits to human-readable strings takes up a
non-trivial amount of space, and only exists to support /proc/cpuinfo
and a couple of kernel messages.  Since programs depend on the format of
/proc/cpuinfo, force inclusion of the table when building with /proc
support; otherwise, support omitting that table to save space, in which
case the kernel messages will print features numerically instead.

In addition to saving 1408 bytes out of vmlinux, this also saves 1373
bytes out of the uncompressed setup code, which contributes directly to
the size of bzImage.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>