- 18 1月, 2010 1 次提交
-
-
由 Swen Schillig 提交于
The hardware used with zfcp provides a timer for CT and ELS requests instead of an abort capability for these commands. To correctly handle the FC BSG timeouts, pass the timeout from the BSG requests to the hardware. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 12月, 2009 11 次提交
-
-
由 Christof Schmitt 提交于
Enable the display of supported and active fc4s for zfcp in the FC transport class. zfcp only supports FCP, so simply hard-code this information. The zfcp hbaapi already has this information hardcoded, but this would allow to switch from the coding in the zfcp hbaapi to the common FC transport attributes in the future. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The SCSI midlayer retries commands based on the remote port state and the command status reported by the driver. Returning DID_TRANSPORT_DISRUPTED is a better approach, use this for reporting FSF errors back to the SCSI midlayer. See http://marc.info/?l=linux-scsi&m=125668044215051&w=2 as reference. There is also no need in special treatment of ABORTED commands, so remove the ZFCP_STATUS_FSFREQ_ABORTED, the commands are then returned with DID_TRANSPORT_DISRUPTED. Also remove the ZFCP_STATUS_FSFREQ_RETRY: It is useless, no retry is happening in the FSF layer and nobody checks the state of this flag. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Remove some redundancies in FC related code and trace: - drop redundant data from SAN trace (local s_id that only changes during link down, ls_code that is already part of payload, d_id in ct response trace that is always the same as in ct request trace) - use one common fsf struct to hold zfcp data for ct and els requests - leverage common fsf struct for FC passthrough job data, allocate it with dd_bsg_data for passthrough requests and unify common code for ct and els passthrough request - simplify callback handling in zfcp_fc Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Instead of assigning 4 bytes with the highest byte masked out, use a 3 byte array with the ntoh24 and h24ton helper functions, thus eliminating the need for the ZFCP_DID_MASK. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The well-known-address (WKA) port handling code is part of the FC code in zfcp. Move everything WKA related to the zfcp_fc files and use the common zfcp_fc prefix for structs and functions. Drop the unused key management service while renaming the struct, no request could ever reach this service in zfcp and it is obsolete anyway. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Use common code definitions for FC plogi, logo, rscn and adisc structs instead of inventing private ones. Move the private struct for issuing ELS ADISC inside zfcp to zfcp_fc header file. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Use common data structures for FCP CMND, FCP RSP and related definitions and remove zfcp private definitions. Split the FCP CMND setup and FCP RSP evaluation code in seperate functions. Use inline functions to not negatively impact the I/O path. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The port_scan work was scheduled to the work_queue provided by the kernel. This resulted on SMP systems to a likely situation that more than one scan_work were processed in parallel. This is not required and openes the possibility of race conditions between the removal of invalid ports and the enqueue of just scanned ports. This patch synchronizes the scan_work tasks by scheduling them to adapter local work_queue. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The latencies traced per fsf request are traced for sysfs output and for blktrace, each in one function. Simplify the tracing code by merging both tracing functions into one. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Replace the local reference counting by already available mechanisms offered by kref. Where possible existing device structures were used, including the same functionality. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The global config_lock was used to protect the configuration organized in independent lists. It is not necessary to have a lock on driver level for this purpose. This patch replaces the global config_lock with a set of local list locks. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 22 10月, 2009 2 次提交
-
-
由 Christof Schmitt 提交于
Add HZ since the start_timer function expects jiffies, not seconds. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
After opening a remote port zfcp checks if the WWPN returned in the PLOGI maches the WWPN of the port that should have been opened. On a mismatch zfcp assumes that the DID just changed, queries the FC nameserver and tries again. If the situation persists the erp will give up. With this strategy, if the remote port always returns the wrong PLOGI data, the remote port will not be opened. Introduce a warning, so that the system administrator knows why the remote port is not being opened and to have a pointer to investigate the problem on the storage system. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 02 10月, 2009 1 次提交
-
-
由 Christof Schmitt 提交于
The common initialization of ct/gs and els requests missed the initialization of unchained requests. Fix this by moving the common parts to a place that is called for all ct/gs and els requests. Reviewed-by: NFelix Beck <felix.beck@de.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 05 9月, 2009 13 次提交
-
-
由 Christof Schmitt 提交于
The recommendation for a timeout of 2 * R_A_TOV is the same for ct/gs and els requests, so set it in the common function used for initializing both request types. Besides, the timer inside zfcp should only run longer than the timeout set for the channel, so 10 seconds more should be enough (instead of 60 seconds). Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Update the Fibre Channel related code to use the zfcp_fc prefix. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Change the dbf data and functions to use the zfcp_dbf prefix throughout the code. Also change the calls to dbf to use zfcp_dbf instead of zfcp_adapter. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Don't let the erp wait for gid_pn requests to complete. Instead, queue the gid_pn work, exit erp and let the finished gid_pn work trigger a new port reopen. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The zfcp_adapter structure was growing over time to a size of almost one memory page. To reduce the size of the data structure and to seperate different layers, put all qdio related data in the new zfcp_qdio data structure. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Split all qdio related attributes out of zfcp_fsf_req and put it in new structure. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Remove the global driver work queue and replace it with a workqueue local to the adapter. The usage of this workqueue makes this the correct place for the structure. In addition multiple adapters won't block each other due to the serialization of the queued work. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The flag ZFCP_REQ_AUTO_CLEANUP was useless as the ZFCP_STATUS_FSFREQ_CLEANUP flag is there for exactly the same purpose. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
Remove the special case for NO_QTCB requests and optimize the mempool and cache processing for fsfreqs. Especially use seperate mempools for the zfcp_fsf_req and zfcp_qtcb structs. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
The combination wait_queue/wakeup in conjunction with the flag ZFCP_STATUS_FSFREQ_COMPLETED to signal the completion of an fsfreq was not race-safe and can be better solved by a completion. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Swen Schillig 提交于
There is no need for the QDIO layer to have knowledge or do things wich are done better by the FSF layer and vice versa. Straighten a few things to improve vividness. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
Using a bitwise OR to not set anything at all is pointless so remove the useless statement. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Christof Schmitt 提交于
The default trace level is to only trace failed SCSI commands. Thus it is not necessary to collect trace data for most SCSI commands since it will be thrown away later. Restructure the SCSI trace infrastructure to first check the trace level in a inline function and only do the expensive data collection for matching trace levels. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 7月, 2009 6 次提交
-
-
由 Swen Schillig 提交于
Under certain conditions it is possible that a WKA port ist not opened within the expected timeframe of half a second. In this situation the WKA port remains in the state OPENING preventing any succeding request to open the port. This led to unrecoverable remote ports. Fixing this by always setting an appropriate WKA port status before leaving the function and removing the timeout value here since it's not needed here because the general timeout processing would deal with it if required. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Christof Schmitt 提交于
Depending on interruptions on some storage systems, the complete channel can stall which looks like an outbound queue stall to Linux. When trying to acquire a free SBAL for a non-SCSI command, zfcp waits for 5 seconds for a free slot to appear. This is the right place to detect a queue stall: If the wait times out, we assume a stalled queue and try to recover this. The overall strategy should be to trigger the erp from specific events, and not try an overall escalation from one failed port to a full-blown queue recovery. If we manage to send a command, the status codes for this command or a timeout will trigger the right follow-on actions. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Christof Schmitt 提交于
-ENOMEM is for memory allocation problems, -EIO for queue/SBAL allocation problems. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Christof Schmitt 提交于
The ELS ADISC and the GID_PN requests sent from zfcp fit into unchained FSF requests. Change the FSF allocation logic to use unchained requests whenever possible where everything fits in one SBAL. This avoids acquiring more SBALs than necessary, especially during zfcp recovery when things might be stalled. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Christof Schmitt 提交于
When a fsf_req or a qtcb cannot be allocated return -ENOMEM instead of -EIO. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Swen Schillig 提交于
We should not modify the port status after triggering an ERP action for the port. It is not guaranteed which status is finally active when the ERP action is performed. This can lead to situations which are unwanted and hard to debug in case of a failure. Signed-off-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 13 6月, 2009 1 次提交
-
-
由 Christof Schmitt 提交于
Don't access the block layer request, get the payload length instead from the FC job. Simplify access to the zfcp_port, only the d_id is required, if the port is no longer accessed later. This is possible when the els_handler does not access the port pointer from the ELS request. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 24 5月, 2009 4 次提交
-
-
由 Christof Schmitt 提交于
Keep the information about the device and model id in zfcp_ccw. This requires an additional helper function to check for the privileged cfdc subchannel, but it allows the removal of the redundant defines from the zfcp_def header file. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Martin Petermann 提交于
In rare cases, open port request might timeout, erp calls zfcp_port_put, port gets dequeued. Now, the late returning (or dismissed) fsf-port-open calls the fsf_port_open_handler that tries to reference the port data structure leading to a kernel oops. Signed-off-by: NMartin Petermann <martin.petermann@de.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Christof Schmitt 提交于
Add comments where there is a deliberate fall through in switch/case statements. This makes some code checkers happy and makes it clear that there is no missing break statement. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Christof Schmitt 提交于
enum dma_data_direction only has the 4 values DMA_BIDIRECTIONAL, DMA_TO_DEVICE, DMA_FROM_DEVICE and DMA_NONE. No need to have the default case. While changing this, setup sbtype in one place to make sparse happy. The default value of retval is already -EIO, so remove the additional assignment for these two cases. Reviewed-by: NSwen Schillig <swen@vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 27 4月, 2009 1 次提交
-
-
由 Christof Schmitt 提交于
The zfcp_port might have been removed, while the FC fast_io_fail timer is still running and could trigger the terminate_rport_io callback. Set the pointer to the zfcp_port to NULL and check accordingly before using it. Reviewed-by: NMartin Petermann <martin@linux.vnet.ibm.com> Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-