This patch adds WRITE_STRIP support in target_write_prot_action() that
invokes sbc_dif_verify_write() for checking T10-PI metadata before
submitting the I/O to a backend driver.

Upon verify failure, the specific sense code is propigated up the
failure path up to transport_generic_request_failure().

Also, update sbc_dif_verify_write() to only perform the subsequent
protection metadata copy when a valid *sg is passed.

(Use ilog2 instead of division and unlikely for pi_err - Sagi)
Reviewed-by: NMartin Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch moves the existing target_execute_cmd() check for
cmd->prot_op into it's own function, so it's easier to add
future support for WRITE STRIP.

(Use better target_write_prot_action name - Sagi)
Reviewed-by: NMartin Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch updates standard INQUIRY, INQUIRY EVPD=0x86, READ_CAPACITY_16
and control mode pages to use se_sess->sess_prot_type when determing which
type of T10-PI related feature bits can be exposed.

This is required for fabric sessions supporting T10-PI metadata to
backend devices that don't have protection enabled.
Reviewed-by: NMartin Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Gilbert <dgilbert@interlog.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a new target_core_fabric_ops callback for allowing fabric
drivers to expose a TPG attribute for signaling when a T10-PI protected
fabric wants to function with an un-protected device without T10-PI.

This specifically is to allow LIO to perform WRITE_STRIP + READ_INSERT
operations when functioning with non T10-PI enabled devices, seperate
from any available hw offloads the fabric supports.

This is done using a new se_sess->sess_prot_type that is set at fabric
session creation time based upon the TPG attribute.  It currently cannot
be changed for individual sessions after initial creation.

Also, update existing target_core_sbc.c code to honor sess_prot_type when
setting up cmd->prot_op + cmd->prot_type assignments.

(Add unlikely and !! boolean conversion in sbc_check_prot - Sagi)

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Doug Gilbert <dgilbert@interlog.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch changes existing DIF emulation to check the command descriptor's
prot_type, instead of what the backend device is exposing in pi_prot_type.

Since this value is already set in sbc_check_prot(), go ahead and use it to
allow protected fabrics to function with unprotected devices.
Reviewed-by: NMartin Petersen <martin.petersen@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We should not declare extrnal .c symbols in C files to make sure they
match the actual prototype, and sparse correctly warns about this.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fix AllRegistrants reservations in register_and_move() function where
the code didn't handle all of the registered devices as reservation
holders, resulting in the wrong warning message being displayed.

At the same time, introduce a helper function named
'is_reservation_holder()' that properly checks if a device is a
reservation holder, taking into account the reservation type. This
function cleans up the code and improves readability.
Signed-off-by: NIlias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: NVangelis Koukis <vkoukis@arrikto.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Now that iscsi_conn allocates new [rx,tx] threads using kthread.h
primitives on the fly, and kthread_stop() is called directly during
connection shutdown, it's time to go ahead and drop iscsi_target_tq.c
legacy code.

The use of multiple struct completion in iscsi_activate_thread_set()
has been proven to cause issues during repeated iser login/logout.
Tested-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts iscsi-target code to use modern kthread.h API
callers for creating RX/TX threads for each new iscsi_conn descriptor,
and releasing associated RX/TX threads during connection shutdown.

This is done using iscsit_start_kthreads() -> kthread_run() to start
new kthreads from within iscsi_post_login_handler(), and invoking
kthread_stop() from existing iscsit_close_connection() code.

Also, convert iscsit_logout_post_handler_closesession() code to use
cmpxchg when determing when iscsit_cause_connection_reinstatement()
needs to sleep waiting for completion.
Reported-by: NSagi Grimberg <sagig@mellanox.com>
Tested-by: NSagi Grimberg <sagig@mellanox.com>
Cc: Slava Shwartsman <valyushash@gmail.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts the fabric module autoload failures from
pr_err to pr_debug in target_core_register_fabric() code, to
reduce the amount of noise during normal operation.
Reported-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch exposes a new ../iscsi/$IQN/$TPGT/dynamic_sessions attribute
to dump the currently active sessions by iSCSI InitiatorName that have
been created with dynamically generated se_node_acls.

This information is useful so that user-space can optionally perform
dynamic -> explicit NodeACL conversion based on $INITIATOR_WWPN.
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a new helper function that can be used by fabric driver
TPG attributes for dumping the list of active sessions with a dynamically
generated se_node_acl. (generate_node_acl=1).

It prints one se_node_acl->initiatorname per line, up to PAGE_SIZE which
is due to the current limitiation of single page attribute output within
sysfs and configfs code.

Note that if a session is referencing a explicit NodeACL, the InitiatorName
will not appear within dynamic_sessions output.
Reported-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

With the new bio_vec backed iov_iter helpers we can simply set up
on bio_vec per LBA, all pointing to the same initiator-supplied
buffer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch sets the missing LBPWS10 bit within spc_emulate_evpd_b2()
in order to signal WRITE_SAME (10) w/ UNMAP support, following the
existing LBPWS bit to signal WRITE_SAME (16) w/ UNMAP support.

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a check within sbc_parse_cdb() to fail a UNMAP op,
if the backend device has emulate_tpu disabled.

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a check within sbc_setup_write_same() to fail a
WRITE_SAME w/ UNMAP=1 op, if the backend device has emulate_tpws
disabled.

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a sbc_check_dpofua() function that performs sanity
checks for DPO/FUA command bits.

It introduces checks to fail when either bit is set, but the backend
device is not advertising support for them.

It also moves the existing cmd->se_cmd_flags |= SCF_FUA assignement
into the new helper function.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a call to sbc_check_prot() within sbc_setup_write_same()
code to perform the various protection releated sanity checks, including
failing if WRPROTECT or RDPROTECT is set for a backend device that has
not advertised support for T10-PI.

Also, since WRITE_SAME + T10-PI is currently not supported by IBLOCK +
FILEIO backends, go ahead and fail if ->execute_write_same() is invoked
with a non zero cmd->prot_op.

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds an explicit check for WRPROTECT + RDPROTECT bit usage
within sbc_check_prot(), and fails with TCM_INVALID_CDB_FIELD if the
backend device does not have protection enabled.

Also, update sbc_check_prot() to return sense_reason_t in order to
propigate up the correct sense ASQ.

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a check to sbc_parse_cdb() in order to detect when
an LBA + sector vs. end-of-device calculation wraps when the LBA is
sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF).

Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a check to sbc_setup_write_same() to verify
the incoming WRITE_SAME LBA + number of blocks does not exceed
past the end-of-device.

Also check for potential LBA wrap-around as well.
Reported-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.8+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch addresses a bug reported during iser-target login/logout
stress testing, where iscsit_take_action_for_connection_exit() is
incorrectly invoking iscsit_close_connection() twice during IN_LOGOUT
state, after connection shutdown has already been initiated by
iser-target code.

Here is the backtrace:

BUG: unable to handle kernel NULL pointer dereference at 00000000000001f0
IP: [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod]
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: target_core_pscsi(O) target_core_file(O) target_core_iblock(O) ib_isert(O) iscsi_target_mod(O) ib_srpt(O) tcm_loop(O) tcm_fc(O) target_core_mod(O) mst_pciconf(OE) bonding mlx5_ib(O) mlx5_core libfc scsi_transport_fc netconsole configfs nfsv3 nfs_acl mlx4_ib(O) rdma_ucm(O) ib_ucm(O) rdma_cm(O) iw_cm(O) ib_uverbs(O) libiscsi_tcp libiscsi scsi_transport_iscsi mlx4_en mlx4_core ib_ipoib(O) ib_cm(O) ib_sa(O) ib_umad(O) ib_mad(O) ib_core(O) ib_addr(O) rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace autofs4 sunrpc 8021q garp stp llc ipv6 dm_mirror dm_region_hash dm_log dm_multipath uinput ipmi_si ipmi_msghandler acpi_pad iTCO_wdt iTCO_vendor_support dcdbas microcode pcspkr wmi sb_edac edac_core sg lpc_ich mfd_core shpchp tg3 ptp pps_core dm_mod ext3(E) jbd(E) mbcache(E) sr_mod(E) cdrom(E) sd_mod(E) ahci(E) libahci(E) megaraid_sas(E) [last unloaded: target_core_mod]
CPU: 2 PID: 5280 Comm: iscsi_ttx Tainted: G        W  OE  3.18.0-rc2+ #22
Hardware name: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.0.9 03/08/2013
task: ffff8806132f9010 ti: ffff880601d6c000 task.ti: ffff880601d6c000
RIP: 0010:[<ffffffffa033d992>] [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod]
RSP: 0018:ffff880601d6fe18  EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffff8805dc437800 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffffa033d98b
RBP: ffff880601d6fe28 R08: 0000000000000000 R09: 000000000000dd37
R10: 00000000ec5d4202 R11: 0000000000000001 R12: ffff8805dc437bf4
R13: ffff88061b831600 R14: ffff880601d6fe58 R15: ffff8806132f9010
FS:  0000000000000000(0000) GS:ffff88032fa20000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001f0 CR3: 0000000001a14000 CR4: 00000000000407e0
Stack:
ffff8805dc437800 fffffffffffffe00 ffff880601d6feb8 ffffffffa034ed40
ffff8806132f9010 ffff880601d6fe70 0f00000000000000 ffff8805d51fbef0
0000000000000000 ffff8806132f9010 ffffffff8108e7f0 ffff880601d6fe70
Call Trace:
[<ffffffffa034ed40>] iscsi_target_tx_thread+0x160/0x220 [iscsi_target_mod]
[<ffffffff8108e7f0>] ? bit_waitqueue+0xb0/0xb0
[<ffffffffa034ebe0>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[<ffffffff8107017e>] kthread+0xce/0xf0
[<ffffffff810700b0>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff815a0b6c>] ret_from_fork+0x7c/0xb0
[<ffffffff810700b0>] ? kthread_freezable_should_stop+0x70/0x70
Code: 06 0f 84 82 00 00 00 3c 08 74 4e f6 05 39 e6 02 00 04 0f 85 9e 00 00 00 c6 43 19 08 4c 89 e7 e8 65 2a 26 e1 48 8b 83 a0 04 00 00 <48> 8b 88 f0 01 00 00 80 b9 d8 04 00 00 02 74 2e f6 05 31 e6 02
RIP  [<ffffffffa033d992>] iscsit_take_action_for_connection_exit+0x62/0x110 [iscsi_target_mod]
RSP <ffff880601d6fe18>
CR2: 00000000000001f0
---[ end trace a0c33436cd0836b4 ]---

This special case is still required by ISCSI_TCP transport during a
iscsit_handle_logout_cmd() failure case in iscsi_target_rx_opcode(),
but must be avoided for iser-target.
Reported-by: NSagi Grimberg <sagig@mellanox.com>
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Slava Shwartsman <valyushash@gmail.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation
for write-out of PR APTPL metadata that Martin has recently been
running into.

It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed
memory instead of kzalloc, and increases the default hardcoded
length to 256k.

It also adds logic in core_scsi3_update_and_write_aptpl() to double
the original length upon core_scsi3_update_aptpl_buf() failure, and
retries until the vzalloc'ed buffer is large enough to accommodate
the outgoing APTPL metadata.
Reported-by: NMartin Svec <martin.svec@zoner.cz>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code.  It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.

Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.

[   60.782534] ------------[ cut here ]------------
[   60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[   60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[   60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib]
[   60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[   60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[   60.782599]  0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[   60.782602]  ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[   60.782605]  ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[   60.782607] Call Trace:
[   60.782611]  [<ffffffff81553ae7>] dump_stack+0x49/0x62
[   60.782615]  [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0
[   60.782618]  [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50
[   60.782620]  [<ffffffff81280933>] __list_del_entry+0x63/0xd0
[   60.782622]  [<ffffffff812809b1>] list_del+0x11/0x40
[   60.782630]  [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[   60.782635]  [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[   60.782642]  [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[   60.782647]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782652]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782655]  [<ffffffff8106f99e>] kthread+0xce/0xe0
[   60.782657]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782660]  [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0
[   60.782662]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782663] ---[ end trace 9662f4a661d33965 ]---

Since this code is no longer used, go ahead and drop the problematic usage
all-together.
Reported-by: NGavin Guo <gavin.guo@canonical.com>
Reported-by: NMoussa Ba <moussaba@micron.com>
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case sendtargets response is larger than initiator MRDSL, we
send a partial sendtargets response (setting F=0, C=1, TTT!=0xffffffff),
accept a consecutive empty text message and send the rest of the payload.
In case we are done, we set F=1, C=0, TTT=0xffffffff.
We do that by storing the sendtargets response bytes done under
the session.

This patch also makes iscsit_find_cmd_from_itt public for isert.

(Re-add cmd->maxcmdsn_inc and clear in iscsit_build_text_rsp - nab)
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

No reason to allocate a buffer of size bigger than initiator
MaxRecvDataSegmentLength. Moreover, we need to respect initiator
MRDSL and not send a larger payload.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Reduce code duplication.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Seems strange to see in include/target/iscsi/iscsi_transport.h:
include "../../../drivers/target/iscsi/iscsi_target_core.h"

Move it to it's natural location.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.

This makes the very common pattern of

  if (genlmsg_end(...) < 0) { ... }

be a whole bunch of dead code. Many places also simply do

  return nlmsg_end(...);

and the caller is expected to deal with it.

This also commonly (at least for me) causes errors, because it is very
common to write

  if (my_function(...))
    /* error condition */

and if my_function() does "return nlmsg_end()" this is of course wrong.

Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.

Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did

-	return nlmsg_end(...);
+	nlmsg_end(...);
+	return 0;

I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.

One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of pushing each byte via stack the %*ph specifier allows to supply just
a pointer and length of the buffer. The patch converts code to use the
specifier.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Everything else starts with ICF so the last two should as well.

Fix places they are used to match.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

For PGR reservation of type Write Exclusive Access, allow all non
reservation holding I_T nexuses with active registrations to READ
from the device.

This addresses a bug where active registrations that attempted
to READ would result in an reservation conflict.
Signed-off-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Now that fabric_max_sectors is no longer used to enforce the maximum
I/O size, go ahead and drop it's left-over usage in target-core and
associated backend drivers.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>