- 01 8月, 2010 40 次提交
-
-
由 Mohammed Gamal 提交于
The vmexit handler returns KVM_EXIT_UNKNOWN since there is no handler for vmentry failures. This intercepts vmentry failures and returns KVM_FAIL_ENTRY to userspace instead. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gui Jianfeng 提交于
There's no need to calculate quadrant if tdp is enabled. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
When tdp is enabled, the guest's cr0.wp shouldn't have any effect on spte permissions. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Memory allocation may fail. Propagate such errors. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Zachary Amsden 提交于
Must set VCPU register to be the guest notion of EFER even if that setting is not valid on hardware. This was masked by the set in set_efer until 7657fd5ace88e8092f5f3a84117e093d7b893f26 broke that. Fix is simply to set the VCPU register before stripping bits. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gui Jianfeng 提交于
Since we have is_writable_pte(), make use of it. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
In Documentation/kvm/mmu.txt: gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. But in function FNAME(fetch)(), sp->gfn is incorrect when one of following situations occurred: 1) guest is 32bit paging and the guest PDE maps a 4-MByte page (backed by 4k host pages), FNAME(fetch)() miss handling the quadrant. And if guest use pse-36, "table_gfn = gpte_to_gfn(gw->ptes[level - delta]);" is incorrect. 2) guest is long mode paging and the guest PDPTE maps a 1-GByte page (backed by 4k or 2M host pages). So we fix it to suit to the document and suit to the code which requires sp->gfn correct when sp->role.direct=1. We use the goal mapping gfn(gw->gfn) to calculate the base page frame for linear translations, it is simple and easy to be understood. Reported-by: NMarcelo Tosatti <mtosatti@redhat.com> Reported-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
In Document/kvm/mmu.txt: gfn: Either the guest page table containing the translations shadowed by this page, or the base page frame for linear translations. See role.direct. But in __direct_map(), the base gfn calculation is incorrect, it does not calculate correctly when level=3 or 4. Fix by using PT64_LVL_ADDR_MASK() which accounts for all levels correctly. Reported-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
When sp->role.direct is set, sp->gfns does not contain any essential information, leaf sptes reachable from this sp are for a continuous guest physical memory range (a linear range). So sp->gfns[i] (if it was set) equals to sp->gfn + i. (PT_PAGE_TABLE_LEVEL) Obviously, it is not essential information, we can calculate it when need. It means we don't need sp->gfns when sp->role.direct=1, Thus we can save one page usage for every kvm_mmu_page. Note: Access to sp->gfns must be wrapped by kvm_mmu_page_get_gfn() or kvm_mmu_page_set_gfn(). It is only exposed in FNAME(sync_page). Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mohammed Gamal 提交于
For the sake of completeness, this patch adds a symbolic constant for VMX exit reason 0x21 (invalid guest state). Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Allow more page become asynchronous at getting sp time, if need create new shadow page for gfn but it not allow unsync(level > 1), we should unsync all gfn's unsync page Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
In current code, shadow page can become asynchronous only if one shadow page for a gfn, this rule is too strict, in fact, we can let all last mapping page(i.e, it's the pte page) become unsync, and sync them at invlpg or flush tlb time. This patch allow more page become asynchronous at gfn mapping time Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
On SVM interrupts are injected by svm_set_irq() not svm_inject_irq(). The later is used only to wait for irq window. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Only unsync pages need updated at invlpg time since other shadow pages are write-protected Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Two cases maybe happen in kvm_mmu_get_page() function: - one case is, the goal sp is already in cache, if the sp is unsync, we only need update it to assure this mapping is valid, but not mark it sync and not write-protect sp->gfn since it not broke unsync rule(one shadow page for a gfn) - another case is, the goal sp not existed, we need create a new sp for gfn, i.e, gfn (may)has another shadow page, to keep unsync rule, we should sync(mark sync and write-protect) gfn's unsync shadow page. After enabling multiple unsync shadows, we sync those shadow pages only when the new sp not allow to become unsync(also for the unsyc rule, the new rule is: allow all pte page become unsync) Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Split kvm_sync_page() into kvm_sync_page() and kvm_sync_page_transient() to clarify the code address Avi's suggestion kvm_sync_page_transient() function only update shadow page but not mark it sync and not write protect sp->gfn. it will be used by later patch Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
Convert KVM to use generic FPU API. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
We can avoid unnecessary fpu load when userspace process didn't use FPU frequently. Derived from Avi's idea. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
Also add some constants. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Now that all arch specific ioctls have centralized locking, it is easy to move it to the central dispatcher. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
All vcpu ioctls need to be locked, so instead of locking each one specifically we lock at the generic dispatcher. This patch only updates generic ioctls and leaves arch specific ioctls alone. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
fix: arch/x86/kvm/x86.c: In function ‘handle_emulation_failure’: arch/x86/kvm/x86.c:3844: warning: unused variable ‘ctxt’ Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
sp->gfns[] contain unaliased gfns, but gpte might contain pointer to aliased region. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Remove rmap before clear spte otherwise it will trigger BUG_ON() in some functions such as rmap_write_protect(). Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Use kmem_cache_free to free objects allocated by kmem_cache_alloc. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alex Williamson 提交于
Remove this check in an effort to allow kvm guests to run without root privileges. This capability check doesn't seem to add any security since the device needs to have already been added via the assign device ioctl and the io actually occurs through the pci sysfs interface. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Sheng Yang 提交于
Only modifying some bits of CR0/CR4 needs paging mode switch. Modify EFER.NXE bit would result in reserved bit updates. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Sheng Yang 提交于
mmu.free() already set root_hpa to INVALID_PAGE, no need to do it again in the destory_kvm_mmu(). kvm_x86_ops->set_cr4() and set_efer() already assign cr4/efer to vcpu->arch.cr4/efer, no need to do it again later. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Mohammed Gamal 提交于
This adds missing decoder flags for xor instructions (opcodes 0x34 - 0x35) Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Mohammed Gamal 提交于
This adds missing decoder flags for sub instructions (opcodes 0x2c - 0x2d) Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Mohammed Gamal 提交于
This adds test acc, imm instruction to the x86 emulator Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Dongxiao Xu 提交于
SDM suggests VMXON should be called before VMPTRLD, and VMXOFF should be called after doing VMCLEAR. Therefore in vmm coexistence case, we should firstly call VMXON before any VMCS operation, and then call VMXOFF after the operation is done. Signed-off-by: NDongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Dongxiao Xu 提交于
Originally VMCLEAR/VMPTRLD is called on vcpu migration. To support hosted VMM coexistance, VMCLEAR is executed on vcpu schedule out, and VMPTRLD is executed on vcpu schedule in. This could also eliminate the IPI when doing VMCLEAR. Signed-off-by: NDongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-