Now we have the CFAR saved add it to the oops output.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add poll_get_char and poll_put_char for kdb. Enable kdb at boot with:

kgdboc=hvc0

or at runtime with:

echo hvc0 > /sys/module/kgdboc/parameters/kgdboc
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

commit 4d2bb3f5 (powerpc/pseries: Re-implement HVSI as part of
hvc_vio) changed udbg_getc to be based on hvterm_raw_get_chars.
Unfortunately hvterm_raw_get_chars returns -EAGAIN if you ask
for anything less than 16 characters. As a result xmon no longer
accepts input and prints a stream of junk to the screen.

The recent change highlights a problem that xmon on pseries VIO
has had all along, that it can drop input characters. The issue
is the hypervisor call does not take a count argument and can
return up to 16 characters.

This patch adds a per vterm buffer that we copy input data into
and give it out as requested.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

HFI creates interrupts each time a window is setup. This results in
a lot of messages in the kernel log buffer:

    irq: irq 199007 on host null mapped to virtual irq 351

This box has over 3500 of them, causing more important kernel
messages to be overwritten. We can get at this information via
debugfs now so we may as well turn it into a pr_debug.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

As a result of changes to Kconfig files, we no longer enable
the lockup and hung task detectors. Both are very light weight
and provide useful information in the event of a hang, so
reenable them.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add mpt2sas driver to pseries and ppc64 defconfig.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The IRQs off tracer enables mcount which has a big impact on
performance. Disable it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The pseries defconfig had a number of drivers enabled and we may
as well add them to the ppc64 defconfig.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Return -EAGAIN when we get H_BUSY back from the hypervisor. This
makes the hvc console driver retry, avoiding dropped printks.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently, the hvc_console_print() function drops console output if the
hvc backend's put_chars() returns 0.  This patch changes this behavior
to allow a retry through returning -EAGAIN.

This change also affects the hvc_push() function.  Both functions are
changed to handle -EAGAIN and to retry the put_chars() operation.

If a hvc backend returns -EAGAIN, the retry handling differs:

  - hvc_console_print() spins to write the complete console output.
  - hvc_push() behaves the same way as for returning 0.

Now hvc backends can indirectly control the way how console output is
handled through the hvc console layer.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: NAnton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The existing code it pretty ugly.  How about we clean it up even more
like this?

From: Anton Blanchard <anton@samba.org>

We check for timeout expiry in the outer loop, but we also need to
check it in the inner loop or we can lock up forever waiting for a
CPU to hit real mode.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On 32bit platforms that support >= 4GB memory total_ram was truncated.
This creates a confusing printk:
	Top of RAM: 0x100000000, Total RAM: 0x0
Fix that:
	Top of RAM: 0x100000000, Total RAM: 0x100000000
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add simple cpufreq driver for Maple-based boards (ppc970fx evaluation
kit and others). Driver is based on a cpufreq driver for 64-bit powermac
boxes with all pmac-dependant features removed and simple cleanup
applied.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This fixes the following warning:
WARNING: arch/powerpc/kernel/built-in.o(.text+0x29768): Section mismatch in reference from the function .register_power_pmu() to the function .cpuinit.text:.power_pmu_notifier()
The function .register_power_pmu() references
the function __cpuinit .power_pmu_notifier().
This is often because .register_power_pmu lacks a __cpuinit
annotation or the annotation of .power_pmu_notifier is wrong.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The only reason to require a dma_ops struct is to see if it has
implemented set_dma_mask.  If not we can fall back to setting the mask
directly.

This resolves an issue with how to sequence the setting of a DMA mask
for platform devices.  Before we had an issue in that we have no way of
setting the DMA mask before the various low level bus notifiers get
called that might check it (swiotlb).

So now we can do:

	pdev = platform_device_alloc("foobar", 0);
	dma_set_mask(&pdev->dev, DMA_BIT_MASK(37));
	platform_device_add(pdev);

And expect the right thing to happen with the bus notifiers get called
via platform_device_add.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We have a long standing issues with platform devices not have a valid
dma_mask pointer.  This hasn't been an issue to date as no platform
device has tried to set its dma_mask value to a non-default value.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

On some architectures we need to setup pdev_archdata before we add the
device.  Waiting til a bus_notifier is too late since we might need the
pdev_archdata in the bus notifier.  One example is setting up of dma_mask
pointers such that it can be used in a bus_notifier.

We add weak noop version of arch_setup_pdev_archdata() and allow the arch
code to override with access the full definitions of struct device,
struct platform_device, and struct pdev_archdata.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is used to round-robin TLBCAM entries.
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

On P1022DS both ethernet controllers are connected to RGMII PHYs
accessible via MDIO bus. Remove fixed-link property from ethernet
nodes as they only required when fixed link PHYs without MDIO bus
are used.
Signed-off-by: NFelix Radensky <felix@embedded-sol.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Under the FSL Hypervisor we triggered a BUG_ON in mpc85xx_smp_init that
expected smp_ops.message_pass to be explicity set.  However recent
changes allows smp_ops.message_pass to be NULL and handled by default
code.  Thus the BUG_ON isn't relevant anymore.
Signed-off-by: NLaurentiu TUDOR <Laurentiu.Tudor@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

P2040RDB Specification:
-----------------------
2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
128 Mbyte NOR flash single-chip memory
256 Kbit M24256 I2C EEPROM
16 Mbyte SPI memory
SD connector to interface with the SD memory card
dTSEC1: connected to the Vitesse SGMII PHY (VSC8221)
dTSEC2: connected to the Vitesse SGMII PHY (VSC8221)
dTSEC3: connected to the Vitesse SGMII PHY (VSC8221)
dTSEC4: connected to the Vitesse RGMII PHY (VSC8641)
dTSEC5: connected to the Vitesse RGMII PHY (VSC8641)
I2C1: Real time clock, Temperature sensor
I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM
SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors
UART: supports two UARTs up to 115200 bps for console
USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces
PCIe:
 - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1
 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2
Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

CONFIG_PPC_EPAPR_HV_BYTECHAN adds support for the Freescale hypervisor
byte channel tty driver.

CONFIG_VIRT_DRIVERS and CONFIG_FSL_HV_MANAGER add support for the Freescale
hypervisor management driver.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add the drivers/virt directory, which houses drivers that support
virtualization environments, and add the Freescale hypervisor management
driver.

The Freescale hypervisor management driver provides several services to
drivers and applications related to the Freescale hypervisor:

1. An ioctl interface for querying and managing partitions

2. A file interface to reading incoming doorbells

3. An interrupt handler for shutting down the partition upon receiving the
   shutdown doorbell from a manager partition

4. A kernel interface for receiving callbacks when a managed partition
   shuts down.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Split out common (non-board specific) parts of the SoC related device
tree into a stub so multiple board dts files can include it and we can
reduce duplication and maintenance effort.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Split out common (non-board specific) parts of the SoC related device
tree into a stub so multiple board dts files can include it and we can
reduce duplication and maintenance effort.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

gcc 4.7 will be more strict about parsing the -mtraceback option:

 gcc: error: unrecognized argument in option '-mtraceback=none'
 gcc: note: valid arguments to '-mtraceback=' are: full no part

gcc used to do a 2 char compare so both "no" and "none" would
match. Switch to using -mtraceback=no should work everywhere.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds support for the new "jump label" feature.

Unlike x86 and sparc we just merrily patch the code with no locks etc,
as far as I know this is safe, but I'm not really sure what the x86/sparc
code is protecting against so maybe it's not.

I also don't see any reason for us to implement the poke_early() routine,
even though sparc does.

[BenH: Updated the patch to upstream generic changes]
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A mix of think & mismerge on my side caused a problem where both the
new hvsi_lib and the old hvsi driver gets compiled and try to define
symbols with the same name.

This fixes it by renaming the hvsi_lib exported symbols.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

a9c0f41b breaks the build
on some platforms. The extern declaration must be shielded
against assembly.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds a printk companion to replace the udbg progress function
when initmem is freed.
Suggested-by: NMilton Miller <miltonm@bga.com>
Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDave Carroll <dcarroll@astekcorp.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The free_initmem function is basically duplicated in mm/init_32,
and init_64, and is moved to the common 32/64-bit mm/mem.c.

All other sections except init were removed in v2.6.15 by
6c45ab99 (powerpc: Remove section
free() and linker script bits), and therefore the bulk of the executed
code is identical.

This patch also removes updating ppc_md.progress to NULL in the powermac
late_initcall.
Suggested-by: NMilton Miller <miltonm@bga.com>
Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDave Carroll <dcarroll@astekcorp.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: increase rom size for atrm method

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix operator precedence in shared descriptor allocation

The vbios rom is >64k on a lot of modern asics.  Increase
the fetch size for atrm to make sure we don't miss part
of a larger rom.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

setkey allocates 16 bytes (CAAM_CMD_SZ *
DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to
store the shared descriptor, resulting in memory
corruption.  Fix this.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86 emulator: fix %rip-relative addressing with immediate source operand

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c/pca954x: Initialize the mux to disconnected state
  i2c-taos-evm: Fix log messages

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  arch/powerpc: use printk_ratelimited instead of printk_ratelimit
  powerpc/rtas-rtc: remove sideeffects of printk_ratelimit
  powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig
  powerpc/e500: fix breakage with fsl_rio_mcheck_exception
  powerpc/p1022ds: fix audio-related properties in the device tree
  powerpc/85xx: fix NAND_CMD_READID read bytes number