- 21 4月, 2017 1 次提交
-
-
由 Benjamin Coddington 提交于
Set FL_CLOSE in fl_flags as in locks_remove_posix() when clearing locks. NFS will check for this flag to ensure an unlock is sent in a following patch. Fuse handles flock and posix locks differently for FL_CLOSE, and so requires a fixup to retain the existing behavior for flock. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Acked-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 25 12月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 10月, 2016 1 次提交
-
-
由 Peter Zijlstra 提交于
I overlooked a few code-paths that can lead to locks_delete_global_locks(). Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NJeff Layton <jlayton@poochiereds.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bruce Fields <bfields@fieldses.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-fsdevel@vger.kernel.org Cc: syzkaller <syzkaller@googlegroups.com> Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 9月, 2016 1 次提交
-
-
由 Deepa Dinamani 提交于
current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 22 9月, 2016 3 次提交
-
-
由 Peter Zijlstra 提交于
Avoid spurious preemption. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
As Oleg suggested, replace file_lock_list with a structure containing the hlist head and a spinlock. This completely removes the lglock from fs/locks. Suggested-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Replace the global part of the lglock with a percpu-rwsem. Since fcl_lock is a spinlock and itself nests under i_lock, which too is a spinlock we cannot acquire sleeping locks at locks_{insert,remove}_global_locks(). We can however wrap all fcl_lock acquisitions with percpu_down_read such that all invocations of locks_{insert,remove}_global_locks() have that read lock held. This allows us to replace the lg_global part of the lglock with the write side of the rwsem. In the absense of writers, percpu_{down,up}_read() are free of atomic instructions. This further avoids the very long preempt-disable regions caused by lglock on larger machines. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 16 9月, 2016 2 次提交
-
-
由 Miklos Szeredi 提交于
The problem with writecount is: we want consistent handling of it for underlying filesystems as well as overlayfs. Making sure i_writecount is correct on all layers is difficult. Instead this patch makes sure that when write access is acquired, it's always done on the underlying writable layer (called the upper layer). We must also make sure to look at the writecount on this layer when checking for conflicting leases. Open for write already updates the upper layer's writecount. Leaving only truncate. For truncate copy up must happen before get_write_access() so that the writecount is updated on the upper layer. Problem with this is if something fails after that, then copy-up was done needlessly. E.g. if break_lease() was interrupted. Probably not a big deal in practice. Another interesting case is if there's a denywrite on a lower file that is then opened for write or truncated. With this patch these will succeed, which is somewhat counterintuitive. But I think it's still acceptable, considering that the copy-up does actually create a different file, so the old, denywrite mapping won't be touched. On non-overlayfs d_real() is an identity function and d_real_inode() is equivalent to d_inode() so this patch doesn't change behavior in that case. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Acked-by: NJeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org>
-
由 Miklos Szeredi 提交于
This patch allows flock, posix locks, ofd locks and leases to work correctly on overlayfs. Instead of using the underlying inode for storing lock context use the overlay inode. This allows locks to be persistent across copy-up. This is done by introducing locks_inode() helper and using it instead of file_inode() to get the inode in locking code. For non-overlayfs the two are equivalent, except for an extra pointer dereference in locks_inode(). Since lock operations are in "struct file_operations" we must also make sure not to call underlying filesystem's lock operations. Introcude a super block flag MS_NOREMOTELOCK to this effect. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Acked-by: NJeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org>
-
- 19 8月, 2016 1 次提交
-
-
由 Nikolay Borisov 提交于
On busy container servers reading /proc/locks shows all the locks created by all clients. This can cause large latency spikes. In my case I observed lsof taking up to 5-10 seconds while processing around 50k locks. Fix this by limiting the locks shown only to those created in the same pidns as the one the proc fs was mounted in. When reading /proc/locks from the init_pid_ns proc instance then perform no filtering [ jlayton: reformat comments for 80 columns ] Signed-off-by: NNikolay Borisov <kernel@kyup.com> Suggested-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NJeff Layton <jlayton@redhat.com>
-
- 01 7月, 2016 1 次提交
-
-
由 Miklos Szeredi 提交于
(Another one for the f_path debacle.) ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask. The reason is that generic_add_lease() used filp->f_path.dentry->inode while all the others use file_inode(). This makes a difference for files opened on overlayfs since the former will point to the overlay inode the latter to the underlying inode. So generic_add_lease() added the lease to the overlay inode and generic_delete_lease() removed it from the underlying inode. When the file was released the lease remained on the overlay inode's lock list, resulting in use after free. Reported-by: NEryu Guan <eguan@redhat.com> Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 23 1月, 2016 1 次提交
-
-
由 Al Viro 提交于
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 1月, 2016 5 次提交
-
-
由 Jeff Layton 提交于
...a more descriptive name and we can drop the double underscore prefix. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
由 Jeff Layton 提交于
Right now, we just get WARN_ON_ONCE, which is not particularly helpful. Have it dump some info about the locks and the inode to make it easier to track down leaked locks in the future. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
由 Jeff Layton 提交于
...so we can print information about it if there are leaked locks. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
由 Jeff Layton 提交于
Add some tracepoints around the POSIX locking code. These were useful when tracking down problems when handling the race between setlk and close. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
由 Jeff Layton 提交于
We don't clean out OFD locks on close(), so there's no need to check for a race with them here. They'll get cleaned out at the same time that flock locks are. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
- 08 1月, 2016 1 次提交
-
-
由 Jeff Layton 提交于
Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Fixes: c293621b (stale POSIX lock handling) Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
- 18 12月, 2015 1 次提交
-
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: config FILE_LOCKING bool "Enable POSIX file locking API" if EXPERT ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering gets bumped to one level earlier when we use the more appropriate fs_initcall here. However we've made similar changes before without any fallout and none is expected here either. Cc: Jeff Layton <jlayton@poochiereds.net> Acked-by: NJeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 08 12月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
Pass a loff_t end for the last byte instead of the 32-bit count parameter to allow full file clones even on 32-bit architectures. While we're at it also simplify the read/write selection. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJ. Bruce Fields <bfields@fieldses.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 11月, 2015 1 次提交
-
-
由 Geliang Tang 提交于
Simplify the code with list_first_entry_or_null(). Signed-off-by: NGeliang Tang <geliangtang@163.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 16 11月, 2015 1 次提交
-
-
由 Jeff Layton 提交于
Mandatory locking appears to be almost unused and buggy and there appears no real interest in doing anything with it. Since effectively no one uses the code and since the code is buggy let's allow it to be disabled at compile time. I would just suggest removing the code but undoubtedly that will break some piece of userspace code somewhere. For the distributions that don't care about this piece of code this gives a nice starting point to make mandatory locking go away. Cc: Benjamin Coddington <bcodding@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jeff Layton <jeff.layton@primarydata.com> Cc: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 23 10月, 2015 3 次提交
-
-
由 Benjamin Coddington 提交于
All callers use locks_lock_inode_wait() instead. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Benjamin Coddington 提交于
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct locks API function, use the check within locks_lock_inode_wait(). This allows for some later cleanup. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Benjamin Coddington 提交于
Users of the locks API commonly call either posix_lock_file_wait() or flock_lock_file_wait() depending upon the lock type. Add a new function locks_lock_inode_wait() which will check and call the correct function for the type of lock passed in. Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 15 10月, 2015 1 次提交
-
-
由 Benjamin Coddington 提交于
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 21 9月, 2015 1 次提交
-
-
由 Dmitry Vyukov 提交于
locks_get_lock_context() uses cmpxchg() to install i_flctx. cmpxchg() is a release operation which is correct. But it uses a plain load to load i_flctx. This is incorrect. Subsequent loads from i_flctx can hoist above the load of i_flctx pointer itself and observe uninitialized garbage there. This in turn can lead to corruption of ctx->flc_lock and other members. Documentation/memory-barriers.txt explicitly requires to use a barrier in such context: "A load-load control dependency requires a full read memory barrier". Use smp_load_acquire() in locks_get_lock_context() and in bunch of other functions that can proceed concurrently with locks_get_lock_context(). The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 01 9月, 2015 1 次提交
-
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings in fs/locks.c: Warning(..//fs/locks.c:1577): No description found for parameter 'flags' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 13 7月, 2015 3 次提交
-
-
由 Jeff Layton 提交于
They just call file_inode and then the corresponding *_inode_file_wait function. Just make them static inlines instead. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Jeff Layton 提交于
Allow callers to pass in an inode instead of a filp. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Reviewed-by: N"J. Bruce Fields" <bfields@fieldses.org> Tested-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
由 Jeff Layton 提交于
...and rename it to better describe how it works. In order to fix a use-after-free in NFS, we need to be able to remove locks from an inode after the filp associated with them may have already been freed. flock_lock_file already only dereferences the filp to get to the inode, so just change it so the callers do that. All of the callers already pass in a lock request that has the fl_file set properly, so we don't need to pass it in individually. With that change it now only dereferences the filp to get to the inode, so just push that out to the callers. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com> Reviewed-by: N"J. Bruce Fields" <bfields@fieldses.org> Tested-by: N"J. Bruce Fields" <bfields@fieldses.org>
-
- 17 4月, 2015 1 次提交
-
-
由 Andrey Vagin 提交于
Let's show locks which are associated with a file descriptor in its fdinfo file. Currently we don't have a reliable way to determine who holds a lock. We can find some information in /proc/locks, but PID which is reported there can be wrong. For example, a process takes a lock, then forks a child and dies. In this case /proc/locks contains the parent pid, which can be reused by another process. $ cat /proc/locks ... 6: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF ... $ ps -C rpcbind PID TTY TIME CMD 332 ? 00:00:00 rpcbind $ cat /proc/332/fdinfo/4 pos: 0 flags: 0100000 mnt_id: 22 lock: 1: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF $ ls -l /proc/332/fd/4 lr-x------ 1 root root 64 Mar 5 14:43 /proc/332/fd/4 -> /run/rpcbind.lock $ ls -l /proc/324/fd/ total 0 lrwx------ 1 root root 64 Feb 27 14:50 0 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:50 1 -> /dev/pts/0 lrwx------ 1 root root 64 Feb 27 14:49 2 -> /dev/pts/0 You can see that the process with the 324 pid doesn't hold the lock. This information is required for proper dumping and restoring file locks. Signed-off-by: NAndrey Vagin <avagin@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Acked-by: NJeff Layton <jlayton@poochiereds.net> Acked-by: N"J. Bruce Fields" <bfields@fieldses.org> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 4月, 2015 7 次提交
-
-
由 Jeff Layton 提交于
During the v3.20/v4.0 cycle, I had originally had the code manage the inode->i_flctx pointer using a compare-and-swap operation instead of the i_lock. Sasha Levin though hit a problem while testing with trinity that made me believe that that wasn't safe. At the time, changing the code to protect the i_flctx pointer seemed to fix the issue, but I now think that was just coincidence. The issue was likely the same race that Kirill Shutemov hit while testing the pre-rc1 v4.0 kernel and that Linus spotted. Due to the way that the spinlock was dropped in the middle of flock_lock_file, you could end up with multiple flock locks for the same struct file on the inode. Reinstate the use of a CAS operation to assign this pointer since it's likely to be more efficient and gets the i_lock completely out of the file locking business. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Jeff Layton 提交于
As Bruce points out, there's no compelling reason to change /proc/locks output at this point. If we did want to do this, then we'd almost certainly want to introduce a new file to display this info (maybe via debugfs?). Let's remove the dead WE_CAN_BREAK_LSLK_NOW ifdef here and just plan to stay with the legacy format. Reported-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Jeff Layton 提交于
The current prototypes for these operations are somewhat awkward as they deal with fl_owners but take struct file_lock arguments. In the future, we'll want to be able to take references without necessarily dealing with a struct file_lock. Change them to take fl_owner_t arguments instead and have the callers deal with assigning the values to the file_lock structs. Signed-off-by: NJeff Layton <jlayton@primarydata.com>
-
由 Jeff Layton 提交于
In the event that we get an F_UNLCK request on an inode that has no lock context, there is no reason to allocate one. Change locks_get_lock_context to take a "type" pointer and avoid allocating a new context if it's F_UNLCK. Then, fix the callers to return appropriately if that function returns NULL. Signed-off-by: NJeff Layton <jlayton@primarydata.com>
-
由 Daniel Wagner 提交于
Annonate insert, remove and iterate function that we need blocked_lock_lock held. Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Jeff Layton 提交于
We know that the locks being passed into this function are of the correct type, now that they live on their own lists. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Daniel Wagner 提交于
Since following change commit bd61e0a9 Author: Jeff Layton <jlayton@primarydata.com> Date: Fri Jan 16 15:05:55 2015 -0500 locks: convert posix locks to file_lock_context all Posix locks are kept on their a separate list, so the test is redudant. Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de> Cc: Jeff Layton <jlayton@primarydata.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
- 27 3月, 2015 1 次提交
-
-
由 Yan, Zheng 提交于
locks_delete_lock_ctx() is called inside the loop, so we should use list_for_each_entry_safe. Fixes: 8634b51f (locks: convert lease handling to file_lock_context) Signed-off-by: N"Yan, Zheng" <zyan@redhat.com> Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-