ring_buffer_oldest_event_ts() should return a value of u64 type, because
ring_buffer_per_cpu->buffer_page->buffer_data_page->time_stamp is u64 type.

Link: http://lkml.kernel.org/r/1349998076-15495-5-git-send-email-dhsharp@google.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Because the "tsc" clock isn't in nanoseconds, the ring buffer must be
reset when changing clocks so that incomparable timestamps don't end up
in the same trace.

Tested: Confirmed switching clocks resets the trace buffer.

Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1349998076-15495-3-git-send-email-dhsharp@google.com

Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

!CONFIG_TRACING both declares and defines (empty) trace_printk.
The first one is not redundant so it can be removed.

Link: http://lkml.kernel.org/r/1351172511-18125-1-git-send-email-mhocko@suse.czSigned-off-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.

Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.comSigned-off-by: NVaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Remove ftrace_format_syscall() declaration; it is neither defined nor
used. Also update a comment and formatting.

Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.comSigned-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NVaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.

Here's an example, if you enable the following events:

echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable

Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:

echo 0 > /debug/tracing/events/net/net_dev_xmit/enable

and look at the trace:

cat /debug/tracing/trace
            sshd-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
            sshd-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:

cat /debug/tracing/trace
           <...>-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
           <...>-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

The stored "sshd" comm has been flushed out and we get a useless "<...>".

But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The functon tracing_sched_wakeup_trace() does an open coded unlock
commit and save stack. This is what the trace_nowake_buffer_unlock_commit()
is for.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If comm recording is not enabled when trace_printk() is used then
you just get this type of output:

[ adding trace_printk("hello! %d", irq); in do_IRQ ]

           <...>-2843  [001] d.h.    80.812300: do_IRQ: hello! 14
           <...>-2734  [002] d.h2    80.824664: do_IRQ: hello! 14
           <...>-2713  [003] d.h.    80.829971: do_IRQ: hello! 14
           <...>-2814  [000] d.h.    80.833026: do_IRQ: hello! 14

By enabling the comm recorder when trace_printk is enabled:

       hackbench-6715  [001] d.h.   193.233776: do_IRQ: hello! 21
            sshd-2659  [001] d.h.   193.665862: do_IRQ: hello! 21
          <idle>-0     [001] d.h1   193.665996: do_IRQ: hello! 21
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.

This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.

On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.

Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.comSigned-off-by: NSlava Pestov <slavapestov@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".

Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsitaSigned-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().

There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

 * remove old string conversions with kstrto*

Link: http://lkml.kernel.org/r/20120926200838.GC1244@0x90.atSigned-off-by: NDaniel Walter <sahne@0x90.at>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

FYI, there are new sparse warnings:

 arch/x86/kernel/cpu/perf_event.c:1356:18: sparse: symbol 'events_attr' was not declared. Should it be static?

This patch makes it static and also adds the static keyword to
fix arch/x86/kernel/cpu/perf_event.c:1344:9: warning: symbol
'events_sysfs_show' was not declared.
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: fengguang.wu@intel.com
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-lerdpXlnruh0yvWs2owwuizl@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements, fixes and code move from Arnaldo Carvalho de Melo:

 * Initialize 'page_size' variable in the python binding, this was sent
   for perf/urgent by mistake, then when merging Ingo removed it, fixing
   the problem for perf/urgent, but when perf/urgent was merged with
   perf/core, where that initialization is needed, made the python
   binding mmap call to fail, fix it by initializing page_size again.

 * Add a browser for 'perf script' and make it available from the report
   and annotate browsers. It does filtering to find the scripts that
   handle events found in the perf.data file used. From Feng Tang

 * Move some functions from symbol.c to more appropriate files, creating
   dso.[ch] in the process, no code changes. From Jiri Olsa

 * Fix mmap error output message for when perf_mmap fails and returns
   !-EPERM, where the default for mmap_pages, INT_MAX, was causing a
   !power of 2 error message, fix from Jiri Olsa.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The commit 0c1fe6b2:

 'perf tools: Have the page size value available for all tools'

Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.

Fix it by initializing it on the binding init routine.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The mmap_pages default value is not power of 2 (UINT_MAX).

Together with perf_evlist__mmap function returning error value different
from EPERM, we get misleading error message: "--mmap_pages/-m value must
be a power of two."

Fixing this by adding extra check for UINT_MAX value for this error
condition.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350743599-4805-12-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With this function, other modules can basically check whether a file is
a legal perf data file by checking its first 8 bytes against all
possible perf magic numbers.

Change the function name from check_perf_magic to more meaningful
is_perf_magic as suggested by acme.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-7-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Integrate the script browser into "perf report" framework, users can use
function key 'r' or the drop down menu to list all perf scripts and
select one of them, just like they did for the annotation.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-6-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Integrate the script browser into annotation, users can press function
key 'r' to list all perf scripts and select one of them to run that
script, the output will be shown in a separate browser.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-5-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Create a script browser, so that user can check all the available
scripts for current perf data file and run them inside the main perf
report or annotation browsers, for all perf samples or for samples
belong to one thread/symbol.

Please be noted: current script browser is only for report use, and
doesn't cover the record phase, IOW it must run against one existing
perf data file.

The work flow is, users can use function key to list all the available
scripts for current perf data file in system and chose one, which will
be executed with popen("perf script -s xxx.xx",) and all the output
lines are put into one ui browser, pressing 'q' or left arrow key will
make it return to previous browser.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-4-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As suggested by Arnaldo, many scripts have their own usages and need
capture specific events or tracepoints, so only those scripts whose
target events match the events in current perf data file should be
listed in the script browser menu.

This patch will add the event match checking, by opening "xxx-record"
script to cherry pick out all events name and comparing them with
those inside the perf data file.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-3-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.

Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:

1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.

2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving dso_* related functions into dso object.

Keeping symbol loading related functions still in the symbol object as
it seems more convenient.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com
[ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving strxfrchar function into string object.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving hex2u64 function into util object.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving BUILD_ID_SIZE define into build-id object, plus include related
changes.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving build_id__sprintf function into build-id object.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The callers of parse_events usually have their own error handling.  Move
the fprintf for a bad event to parse_events_options, which is the only
one who should need it.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351283415-13170-25-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements from Arnaldo Carvalho de Melo:

 * perf inject changes to allow showing where a task sleeps, from Andrew Vagin.

 * Makefile improvements from Namhyung Kim.

 * Add --pre and --post command hooks in 'stat', from Peter Zijlstra.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

In order to measure kernel builds, one has to do some pre/post cleanup
work in order to do the repeat build.

So provide --pre and --post command hooks to allow doing just that.

  perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \
	-- make -s -j64 O=defconfig-build/ bzImage
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/1350992414.13456.5.camel@twins
[ committer note: Added respective entries in Documentation/perf-stat.txt ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Otherwise they will be not written in an output file.
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-5-git-send-email-avagin@openvz.org
[ committer note: Fixed up wrt changes made in the immediate previous patches ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

You may want to know where and how long a task is sleeping. A callchain
may be found in sched_switch and a time slice in stat_iowait, so I add
handler in perf inject for merging this events.

My code saves sched_switch event for each process and when it meets
stat_iowait, it reports the sched_switch event, because this event
contains a correct callchain. By another words it replaces all
stat_iowait events on proper sched_switch events.

I use the next sequence of commands for testing:

  perf record -e sched:sched_stat_sleep -e sched:sched_switch \
	      -e sched:sched_process_exit -g -o ~/perf.data.raw \
	      ~/test-program
  perf inject -v -s -i ~/perf.data.raw -o ~/perf.data
  perf report --stdio -i ~/perf.data
   100.00%	foo  [kernel.kallsyms]  [k] __schedule
               	|
                --- __schedule
                    schedule
                   |
                   |--79.75%-- schedule_hrtimeout_range_clock
                   |          schedule_hrtimeout_range
                   |          poll_schedule_timeout
                   |          do_select
                   |          core_sys_select
                   |          sys_select
                   |          system_call_fastpath
                   |          __select
                   |          __libc_start_main
                   |
                    --20.25%-- do_nanosleep
                              hrtimer_nanosleep
                              sys_nanosleep
                              system_call_fastpath
                              __GI___libc_nanosleep
                              __libc_start_main

 And here is test-program.c:

 #include<unistd.h>
 #include<time.h>
 #include<sys/select.h>

 int main()
 {
	struct timespec ts1;
	struct timeval tv1;
	int i;
	long s;

	for (i = 0; i <  10; i++) {
		ts1.tv_sec = 0;
		ts1.tv_nsec = 10000000;
		nanosleep(&ts1, NULL);

		tv1.tv_sec = 0;
		tv1.tv_usec = 40000;
		select(0, NULL, NULL, NULL,&tv1);
	}
	return 1;
 }
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org
[ committer note: Made it use evsel->handler ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before this patch "perf inject" can only handle data from pipe.

I want to use "perf inject" for reworking events. Look at my following patch.

v2: add information about new options in tools/perf/Documentation/
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-2-git-send-email-avagin@openvz.org
[ committer note: fixed it up to cope with 5852a445, 5ded57ac, 002439e8 & f62d3f0f ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently checking mmap support in libelf failed due to wrong flags.

    CHK libelf
    CHK libdw
    CHK libunwind
    CHK -DLIBELF_MMAP
/tmp/ccYJwdR0.o: In function `main':
:(.text+0x18): undefined reference to `elf_begin'
collect2: error: ld returned 1 exit status

This cannot happen since we checked the elf_begin() when checking
libelf and it succeeded.

Fix it by using a same flag with libelf checking.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It might be useful to see what's happening behind us rather than just
waiting few seconds during the config checking.

Also align the CHK message with other ones.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This will show directory change info in a consistent form.  Also it can
be converted again into David Howell's descend command.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Documentation targets handling rules are duplicate.  Consolidate them
with DOC_TARGETS and INSTALL_DOC_TARGETS.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ingo reported (again!) that 'make clean' on perf/traceevent does not
work due to some reason with system header file. Quotes Ingo:

 "Note that the old dependency related build failure thought to be
  fixed in commit 860df583 is back:

   make[1]: *** No rule to make target
   `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'.  Stop.

  'make clean' itself does not work in libtraceevent:

   comet:~/tip/tools/lib/traceevent> make clean
   make: *** No rule to make target `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'.  Stop.

  So I had to clean it out manually:

   comet:~/tip/tools/lib/traceevent> git ls-files --others | xargs rm
   comet:~/tip/tools/lib/traceevent>

  and then things build fine."

Try to fix it by excluding system headers from dependency generation.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351241752-2919-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core trace improvements from Arnaldo Carvalho de Melo:

 * Don't stop synthesizing threads when one vanishes, this is for
   the existing threads when we start a tool like trace.

 * Use sched:sched_stat_runtime to provide a thread summary, this
   produces the same output as the 'trace summary' subcommand of
   tglx's original "trace" tool.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>