Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, numa: For each node, register the memory blocks actually used
  x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order
  x86, mce, therm_throt.c: Fix missing curly braces in error handling logic

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Move TSC reset out of vmcb_init
  KVM: x86: Fix SVM VMCB reset

This patch disables the fanotify syscalls by just not building them and
letting the cond_syscall() statements in kernel/sys_ni.c redirect them
to sys_ni_syscall().

It was pointed out by Tvrtko Ursulin that the fanotify interface did not
include an explicit prioritization between groups.  This is necessary
for fanotify to be usable for hierarchical storage management software,
as they must get first access to the file, before inotify-like notifiers
see the file.

This feature can be added in an ABI compatible way in the next release
(by using a number of bits in the flags field to carry the info) but it
was suggested by Alan that maybe we should just hold off and do it in
the next cycle, likely with an (new) explicit argument to the syscall.
I don't like this approach best as I know people are already starting to
use the current interface, but Alan is all wise and noone on list backed
me up with just using what we have.  I feel this is needlessly ripping
the rug out from under people at the last minute, but if others think it
needs to be a new argument it might be the best way forward.

Three choices:
Go with what we got (and implement the new feature next cycle).  Add a
new field right now (and implement the new feature next cycle).  Wait
till next cycle to release the ABI (and implement the new feature next
cycle).  This is number 3.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Russ reported SGI UV is broken recently. He said:

| The SRAT table shows that memory range is spread over two nodes.
|
| SRAT: Node 0 PXM 0 100000000-800000000
| SRAT: Node 1 PXM 1 800000000-1000000000
| SRAT: Node 0 PXM 0 1000000000-1080000000
|
|Previously, the kernel early_node_map[] would show three entries
|with the proper node.
|
|[    0.000000]     0: 0x00100000 -> 0x00800000
|[    0.000000]     1: 0x00800000 -> 0x01000000
|[    0.000000]     0: 0x01000000 -> 0x01080000
|
|The problem is recent community kernel early_node_map[] shows
|only two entries with the node 0 entry overlapping the node 1
|entry.
|
|    0: 0x00100000 -> 0x01080000
|    1: 0x00800000 -> 0x01000000

After looking at the changelog, Found out that it has been broken for a while by
following commit

|commit 8716273c
|Author: David Rientjes <rientjes@google.com>
|Date:   Fri Sep 25 15:20:04 2009 -0700
|
|    x86: Export srat physical topology

Before that commit, register_active_regions() is called for every SRAT memory
entry right away.

Use nodememblk_range[] instead of nodes[] in order to make sure we
capture the actual memory blocks registered with each node.  nodes[]
contains an extended range which spans all memory regions associated
with a node, but that does not mean that all the memory in between are
included.
Reported-by: NRuss Anderson <rja@sgi.com>
Tested-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB27BDF.5000800@kernel.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: <stable@kernel.org> 2.6.33 .34 .35 .36
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: fix oldnoconfig to do the right thing
  kconfig: Temporarily disable dependency warnings
  kconfig: delay symbol direct dependency initialization

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  IPS driver: Fix limit clamping when reducing CPU power
  [PATCH 2/2] IPS driver: disable CPU turbo
  IPS driver: apply BIOS provided CPU limit if different from default
  intel_ips -- ensure we do not enable gpu turbo mode without driver linkage
  intel_ips: Print MCP limit exceeded values.
  IPS driver: verify BIOS provided limits
  IPS driver: don't toggle CPU turbo on unsupported CPUs
  NULL pointer might be used in ips_monitor()
  Release symbol on error-handling path of ips_get_i915_syms()
  old_cpu_power is wrongly divided by 65535 in ips_monitor()
  seqno mask of THM_ITV register is 16bit

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - fix pressure in Cintiq 21UX2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add another HP DV6 quirk
  OSS: soundcard: locking bug in sound_ioctl()
  ASoC: Update links for Wolfson MAINTAINERS entry
  ASoC: Add Dimitris Papastamos to Wolfson maintainers
  ASoC: Add Jassi Brar as Samsung maintainer

BugLink: https://bugs.launchpad.net/bugs/653420

Add another HP DV6 notebook (103c:363e) to use STAC_HP_DV5.
Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We shouldn't return directly here because we're still holding the
&soundcard_mutex.

This bug goes all the way back to the start of git.  It's strange that
no one has complained about it as a runtime bug.

CC: stable@kernel.org
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The VMCB is reset whenever we receive a startup IPI, so Linux is setting
TSC back to zero happens very late in the boot process and destabilizing
the TSC.  Instead, just set TSC to zero once at VCPU creation time.

Why the separate patch?  So git-bisect is your friend.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

On reset, VMCB TSC should be set to zero.  Instead, code was setting
tsc_offset to zero, which passes through the underlying TSC.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This fixes possible cases of not collecting valid error info in
the MCE error thresholding groups on F10h hardware.

The current code contains a subtle problem of checking only the
Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM
thresholding group) in its first iteration and breaking out if
the bit is cleared.

But (!), this MSR contains an offset value, BlkPtr[31:24], which
points to the remaining MSRs in this thresholding group which
might contain valid information too. But if we bail out only
after we checked the valid bit in the first MSR and not the
block pointer too, we miss that other information.

The thing is, MC4_MISC0[BlkPtr] is not predicated on
MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked
prior to iterating over the MCI_MISCj thresholding group,
irrespective of the MC4_MISC0[Valid] setting.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently the pressure range in Cintiq 21UX2 is limited to half of the
supported. This patch fixes the problem.
Signed-off-by: NAristeu Rozanski <aris@redhat.com>
Acked-by: NPing Cheng <pingc@wacom.com>
CC: stable@kernel.org
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on
                       if (input_mode == nonint_oldconfig ||
                           input_mode == oldnoconfig) {
                               if (input_mode == nonint_oldconfig &&
                                   sym->name &&
                                    !sym_is_choice_value(sym)) {
to avoid oldnoconfig chugging through the else stanza.

Fix that to restore expected behaviour (which I've confirmed in the
Fedora kernel build that the configs end up looking the same.)
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

After fixing a use-after-free bug in kconfig, a 'make defconfig' or
'make allmodconfig' fills the screen with warnings that were not
detected before. Given that we are close to the release now, disable the
warnings temporarily and deal with them after 2.6.36.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  net: clear heap allocation for ETHTOOL_GRXCLSRLALL
  isdn: strcpy() => strlcpy()
  Revert "mac80211: use netif_receive_skb in ieee80211_tx_status callpath"
  mac80211: delete AddBA response timer
  ath9k_hw: fix regression in ANI listen time calculation
  caif: fix two caif_connect() bugs
  bonding: fix WARN_ON when writing to bond_master sysfs file
  skge: add quirk to limit DMA
  MAINTAINERS: update Intel LAN Ethernet info
  e1000e.txt: Add e1000e documentation
  e1000.txt: Update e1000 documentation
  ixgbevf.txt: Update ixgbevf documentation
  cls_u32: signedness bug
  Bluetooth: Disallow to change L2CAP_OPTIONS values when connected
  sctp: Fix out-of-bounds reading in sctp_asoc_get_hmac()
  sctp: prevent reading out-of-bounds memory
  ipv4: correct IGMP behavior on v3 query during v2-compatibility mode
  netdev: Depend on INET before selecting INET_LRO
  Revert "ipv4: Make INET_LRO a bool instead of tristate."
  net: Fix the condition passed to sk_wait_event()
  ...

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: enable Atom C6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: add DMI to disable AML Vista compatibility on MSI GX723 Notebook
  ACPI: Handle ACPI0007 Device in acpi_early_set_pdc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: update issue_seq on cap grant
  ceph: send cap release message early on failed revoke.
  ceph: Update max_len with minimum required size
  ceph: Fix return value of encode_fh function
  ceph: avoid null deref in osd request error path
  ceph: fix list_add usage on unsafe_writes list

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: Fix double page_unlock BUG in write_begin/end

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Prevent module unload to avoid random memory corruption

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Add a workaround for get_clock() for serial driver
  ARM: S5P: Bug fix on errors of build with CONFIG_PREEMPT_NONE
  ARM: SAMSUNG: Fix build warnings because of unused codes

Define an _addr_lsb field in the mips and ia64 siginfo_ts, following
the asm-generic version. This just puts the field over padding.

This fixes a compilation problem introduced with a337fdac.

Cc: ralf@linux-mips.org
Cc: tony.luck@intel.com
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Must drop reference taken by blk_make_request().
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org # .35.x
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ATM-C6 was commented out, pending public documentation.

https://bugzilla.kernel.org/show_bug.cgi?id=19762Tested-by: NDennis Jansen <Dennis.Jansen@...>
Signed-off-by: NLen Brown <len.brown@intel.com>

Calling ETHTOOL_GRXCLSRLALL with a large rule_cnt will allocate kernel
heap without clearing it. For the one driver (niu) that implements it,
it will leave the unused portion of heap unchanged and copy the full
contents back to userspace.
Signed-off-by: NKees Cook <kees.cook@canonical.com>
Acked-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

setup.phone and setup.eazmsn are 32 character buffers.
rcvmsg.msg_data.byte_array is a 48 character buffer.
sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn is 50 chars.

The rcvmsg struct comes from the memcpy_fromio() in receivemessage().
I guess that means it's data off the wire.  I'm not very familiar with
this code but I don't see any reason to assume these strings are NULL
terminated.

Also it's weird that "dn" in a 50 character buffer but we only seem to
use 32 characters.  In drivers/isdn/sc/scioc.h, "dn" is only a 49
character buffer.  So potentially there is still an issue there.

The important thing for now is to prevent the memory corruption.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This BUG is there since the first submit of the code, but only triggered
in last Kernel. It's timing related do to the asynchronous object-creation
behaviour of exofs. (Which should be investigated farther)

The bug is obvious hence the fixed.

Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com>

The i915 driver has quite a few module unload bugs, the known ones at
least have fixes that are targeting 2.6.37. However, in order to
maintain a stable kernel, we should prevent this known random memory
corruption following driver unload. This should have very low impact on
normal users who are unlikely to need to unload the i915 driver.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@kernel.org
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

When the feature PTS is not supported by CPU, the sysfile
package_power_limit_count for package should not be
generated.

This patch is used for fixing missing { and }.

The patch is not complete as there are other error handling
problems in this function - but that can wait until the
merge window.
Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: NFenghua Yu <fenghua.yu@initel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Brown Len <len.brown@intel.com>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: lm-sensors@lm-sensors.org <lm-sensors@lm-sensors.org>
LKML-Reference: <4C7625D1.4060201@np.css.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Serial drivers call get_clock() very early, before platform bus
has been set up, this requires a special check to let them get
a proper clock. Without this patch, a serial console is broken
on S5PV310 and S5PC210 boards.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: fix coding-style]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>

This patch adds header <linux/sched.h> into the below files for build with
CONFIG_PREEMPT_NONE.

arch/arm/mach-s5p6440/cpu.c
arch/arm/mach-s5p6442/cpu.c
arch/arm/mach-s5pc100/cpu.c
arch/arm/mach-s5pv210/cpu.c

Following is error message of in case of s5pv210_defconfig with CONFIG_PREEMPT_NONE.

arch/arm/mach-s5pv210/cpu.c:91: error: implicit declaration of function 'need_resched'
Signed-off-by: NSeungChull Suh <sc.suh@samsung.com>
[kgene.kim@samsung.com: removed mach-s5p64x0/cpu.c]
[kgene.kim@samsung.com: added fix mach-s5p6440/cpu.c]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch removes following unused codes for removing build warnings.

arch/arm/plat-samsung/adc.c:438: warning: unused variable 'flags'
arch/arm/mach-s5pv210/clock.c:176: warning: 's5pv210_clk_ip4_ctrl' defined but not used
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

* 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
  HWPOISON: Stop shrinking at right page count
  HWPOISON: Report correct address granuality for AO huge page errors
  HWPOISON: Copy si_addr_lsb to user
  page-types.c: fix name of unpoison interface

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  elevator: fix oops on early call to elevator_change()