Changes in this patch:
- Move channel variables into a new structure (struct srp_rdma_ch).
- Add an srp_target_port pointer, 'lock' and 'comp_vector' members
  in struct srp_rdma_ch.
- Add code to initialize these three new member variables.
- Many boring "target->" into "ch->" changes.
- The cm_id and completion handler context pointers are now of type
  srp_rdma_ch * instead of srp_target_port *.
- Three kzalloc(a * b, f) calls have been changed into kcalloc(a, b, f)
  to avoid that this patch would trigger a checkpatch warning.
- Two casts from u64 into unsigned long long have been left out
  because these are superfluous. Since considerable time u64 is
  defined as unsigned long long for all architectures supported by
  the Linux kernel.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Introduce the srp_target_port member variables 'sgid' and 'pkey'.
Change the type of 'orig_dgid' from __be16[8] into union ib_gid.
This patch does not change any functionality but makes the
"Separate target and channel variables" patch easier to verify.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

If a cable is pulled during LUN scanning it can happen that the
SRP rport and the SCSI host have been created but no LUNs have been
added to the SCSI host. Since multipathd only sends SCSI commands
to a SCSI target if one or more SCSI devices are present and since
there is no keepalive mechanism for IB queue pairs this means that
after a LUN scan failed and after a reconnect has succeeded no
data will be sent over the QP and hence that a subsequent cable
pull will not be detected. Avoid this by not creating an rport or
SCSI host if a cable is pulled during a SCSI LUN scan.

Note: so far the above behavior has only been observed with the
kernel module parameter ch_count set to a value >= 2.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Attempting to connect three times may be insufficient after an
initiator system tries to relogin, especially if the relogin
attempt occurs before the SRP target service ID has been
registered. Since the srp_daemon retries a failed login attempt
anyway, remove the stale connection retry mechanism.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The patch that adds multichannel support into the SRP initiator
driver introduces an additional call to srp_free_ch_ib(). This
patch helps to keep that later patch simple.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>

Most drivers use exactly the same implementation, so provide it as a
library function.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>

If mlx4_ib_create_flow() attempts to create > 1 rules with the
firmware, and one of these registrations fail, we leaked the
already created flow rules.

One example of the leak is when the registration of the VXLAN ghost
steering rule fails, we didn't unregister the original rule requested
by the user, introduced in commit d2fce8a9 "mlx4: Set
user-space raw Ethernet QPs to properly handle VXLAN traffic".

While here, add dump of the VXLAN portion of steering rules
so it can actually be seen when flow creation fails.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes ntuple calculation for IPv6 active open request for T5
adapter.  And also removes an duplicate line which got added in commit
92e7ae71 ("iw_cxgb4: Choose appropriate hw mtu index and ISS for
iWARP connections")
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

best_mtu and set_emss were not considering ipv6 header for ipv6 case.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This fixes a sparse warning.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In ib_uverbs_open_qp, the sharable xrc target qp is created as a
"pseudo" qp and added to a list of qp's sharing the same physical
QP.  This is done before the "pseudo" qp is assigned a uobject.

There is a race condition here if an async event arrives at the
physical qp.  If the event is handled after the pseudo qp is added to
the list, but before it is assigned a uobject, the kernel crashes in
ib_uverbs_qp_event_handler, due to trying to dereference a NULL
uobject pointer.

Note that simply checking for non-NULL is not enough, due to error
flows in ib_uverbs_open_qp.  If the failure is after assigning the
uobject, but before the qp has fully been created, we still have a
problem.

Thus, in ib_uverbs_qp_event_handler, we test that the uobject is
present, and also that it is live.
Reported-by: NMatthew Finlay <matt@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

During create-ah from userspace, uverbs is sending garbage data in
attr.dmac and attr.vlan_id.  This patch sets attr.dmac and
attr.vlan_id to zero.

Fixes: dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures")
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp.  The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.

To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Roland Dreier <roland@kernel.org>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Parenthesis around constants serves no purpose, save the bits!
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

No need to re-invent the wheel here
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Get rid of obfuscating ocrdma_alloc_mqe() kzalloc() wrapper as all it
did was to make it less visible that the structure was already cleared
on allocation.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If IPV6 is disabled, we get the warning:

    drivers/infiniband/hw/ocrdma/ocrdma_main.c:650:1: warning: label ‘err_notifier6’ defined but not used [-Wunused-label]
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In some platforms, when iommu is enabled, the bus address returned by
dma_alloc_coherent is different than the physical address.  ocrdma
should use physical address for mmap-ing the queue memory for the
applications.

This patch adds the use of virt_to_phys() at all such places where
kernel buffer is mapped to user process context.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

After IP-based GID changes, VLAN id can be obtained from
qp_attr->vlan_id.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Expose more signature setting parameters. We modify the signature API
to allow usage of some new execution parameters relevant to data
integrity feature.

This patch modifies ib_sig_domain structure by:

- Deprecate DIF type in signature API (operation will
  be determined by the parameters alone, no DIF type awareness)
- Add APPTAG check bitmask (for input domain)
- Add REFTAG remap (increment) flag for each domain
- Add APPTAG/REFTAG escape options for each domain

The mlx5 driver is modified to follow the new parameters in HW
signature setup.

At the moment the callers (iser/isert) hard-code new parameters (by
DIF type). In the future, callers will retrieve them from the scsi
command structure.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Later there will be more parameters to set, so we want to do it in a
centralized place.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Later there will be more parameters to set, so we want to do it in a
centralized place.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Rather than using the basic BSF layout which utilizes a pre-configured
signature settings (sufficient for current DIF implementation), we use
the extended BSF layout to expose advanced signature settings. These
settings will also be exposed to the user later.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In the future this will be a per-command parameter so we can lose it,
but in the mean time IP_CSUM is a lot lighter for SW layers to
compute, set it as default.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We clear the struct before - no need to do 0 assignment.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In case input and output space parameters match, we can use a copy
mask from input and output space.  Use enums for those.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When dealing with umem objects, the driver assumed host page sizes
defined by PAGE_SHIFT.  Modify the code to use arbitrary page shift
provided by umem->page_shift to support different page sizes.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Some of the fields were set twice. Re-organize to avoid that.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The check to verify that userspace does not provide an invalid index to the
micro UAR was placed too late. Fix this by moving the check before using the
index.

Reported by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Clear the reserved field of struct ib_uverbs_async_event_desc which is
copied to user space.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Print access flags and error code from ib_umem_get.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Some ULPs may make use of resources created in create_umr_res so make sure to
call destroy_umrc_res after returning from ib_unregister_device, which makes
sure all ULPs have closed their resources.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Update the driver version and add Sagi Grimberg as maintainer
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

- iser_hdr
- iser_data_buf
- iser_mem_reg
- iser_regd_buf
- iser_tx_desc
- iser_rx_desc
- iser_device
- iser_pi_context
- iser_conn
- ib_conn
- iser_comp
- iscsi_iser_task
- iser_global

While we're at it, change nit alignments in this file

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Change logging: "iser:XXXX" to "iser: XXXX"
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Match to the debug level of all functions in connect/disconnect flows.
Signed-off-by: NAriel Nahum <arieln@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>