timer interrupts are excluded from being disabled during suspend. The
clock events code manages the disabling of clock events on its own
because the timer interrupt needs to be functional before the resume
code reenables the device interrupts.

The hpet per cpu timers request their interrupt without setting the
IRQF_TIMER flag so suspend_device_irqs() disables them as well which
results in a fatal resume failure on the boot CPU.

Adding IRQF_TIMER to the interupt flags when requesting the hpet per
cpu timer interrupts solves the problem.
Reported-by: NBenjamin S. <sbenni@gmx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NBenjamin S. <sbenni@gmx.de>
Cc: stable@kernel.org

Fix kernel-doc warnings in atomic_32.h:

  Warning(arch/x86/include/asm/atomic_32.h:265): No description found for parameter 'ptr'
  Warning(arch/x86/include/asm/atomic_32.h:265): Excess function parameter 'v' description in '__atomic64_read'
  Warning(arch/x86/include/asm/atomic_32.h:305): Excess function parameter 'old_val' description in 'atomic64_xchg'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4A3467E6.6010907@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

kernel_physical_mapping_init() could be called in memory hotplug path.

[ Impact: fix potential crash with memory hotplug ]
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
LKML-Reference: <20090612045752.GA827@sli10-desk.sh.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

_sdata is a common symbol defined by many architectures and made
available to the kernel via asm-generic/sections.h. Kmemleak uses this
symbol when scanning the data sections.

[ Impact: add new global symbol ]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
LKML-Reference: <20090511122105.26556.96593.stgit@pc1117.cambridge.arm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On a system where system memory (according e820) is not covered by
mtrr, mtrr_trim_memory converts a portion of memory to reserved, but
bootloader has already put the initrd in that range.

Thus, we need to have 64bit to use relocate_initrd too.

[ Impact: fix using initrd when mtrr_trim_memory happen ]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org

* 'for-linus' of git://linux-arm.org/linux-2.6:
  kmemleak: Add the corresponding MAINTAINERS entry
  kmemleak: Simple testing module for kmemleak
  kmemleak: Enable the building of the memory leak detector
  kmemleak: Remove some of the kmemleak false positives
  kmemleak: Add modules support
  kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash
  kmemleak: Add the vmalloc memory allocation/freeing hooks
  kmemleak: Add the slub memory allocation/freeing hooks
  kmemleak: Add the slob memory allocation/freeing hooks
  kmemleak: Add the slab memory allocation/freeing hooks
  kmemleak: Add documentation on the memory leak detector
  kmemleak: Add the base support

Manual conflict resolution (with the slab/earlyboot changes) in:
	drivers/char/vt.c
	init/main.c
	mm/slab.c

Merge branch 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (574 commits)
  perf_counter: Turn off by default
  perf_counter: Add counter->id to the throttle event
  perf_counter: Better align code
  perf_counter: Rename L2 to LL cache
  perf_counter: Standardize event names
  perf_counter: Rename enums
  perf_counter tools: Clean up u64 usage
  perf_counter: Rename perf_counter_limit sysctl
  perf_counter: More paranoia settings
  perf_counter: powerpc: Implement generalized cache events for POWER processors
  perf_counters: powerpc: Add support for POWER7 processors
  perf_counter: Accurate period data
  perf_counter: Introduce struct for sample data
  perf_counter tools: Normalize data using per sample period data
  perf_counter: Annotate exit ctx recursion
  perf_counter tools: Propagate signals properly
  perf_counter tools: Small frequency related fixes
  perf_counter: More aggressive frequency adjustment
  perf_counter/x86: Fix the model number of Intel Core2 processors
  perf_counter, x86: Correct some event and umask values for Intel processors
  ...

Merge branch 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6

* 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  vgacon: use slab allocator instead of the bootmem allocator
  irq: use kcalloc() instead of the bootmem allocator
  sched: use slab in cpupri_init()
  sched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var()
  memcg: don't use bootmem allocator in setup code
  irq/cpumask: make memoryless node zero happy
  x86: remove some alloc_bootmem_cpumask_var calling
  vt: use kzalloc() instead of the bootmem allocator
  sched: use kzalloc() instead of the bootmem allocator
  init: introduce mm_init()
  vmalloc: use kzalloc() instead of alloc_bootmem()
  slab: setup allocators earlier in the boot sequence
  bootmem: fix slab fallback on numa
  bootmem: use slab if bootmem is no longer available

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: Add missing mutex_unlock call to error path
  missing unlock in jfs_quota_write()

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: memtest: use pointers of equal type for comparison

slow_work_thread() sleeps on slow_work_thread_wq without WQ_FLAG_EXCLUSIVE,
this means that slow_work_enqueue()->__wake_up(nr_exclusive => 1) wakes up all
kslowd threads.  This is not what we want, so we change slow_work_thread() to
use prepare_to_wait_exclusive() instead.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] ata_piix: Enable parallel scan
  sata_nv: use hardreset only for post-boot probing
  [libata] ahci: Restore SB600 SATA controller 64 bit DMA
  ata_piix: Remove stale comment
  ata_piix: Turn on hotplugging support for older chips
  ahci: misc cleanups for EM stuff
  [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2
  sata_sil: enable 32-bit PIO
  sata_sx4: speed up ECC initialization
  libata-sff: avoid byte swapping in ata_sff_data_xfer()
  [libata] ahci: use less error-prone array initializers

* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (25 commits)
  GFS2: Merge gfs2_get_sb into gfs2_get_sb_meta
  GFS2: Fix cache coherency between truncate and O_DIRECT read
  GFS2: Fix locking issue mounting gfs2meta fs
  GFS2: Remove unused variable
  GFS2: smbd proccess hangs with flock() call.
  GFS2: Remove args subdir from gfs2 sysfs files
  GFS2: Remove lockstruct subdir from gfs2 sysfs files
  GFS2: Move gfs2_unlink_ok into ops_inode.c
  GFS2: Move gfs2_readlinki into ops_inode.c
  GFS2: Move gfs2_rmdiri into ops_inode.c
  GFS2: Merge mount.c and ops_super.c into super.c
  GFS2: Clean up some file names
  GFS2: Be more aggressive in reclaiming unlinked inodes
  GFS2: Add a rgrp bitmap full flag
  GFS2: Improve resource group error handling
  GFS2: Don't warn when delete inode fails on ro filesystem
  GFS2: Update docs
  GFS2: Umount recovery race fix
  GFS2: Remove a couple of unused sysfs entries
  GFS2: Add commit= mount option
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits)
  amd64_edac: add MAINTAINERS entry
  EDAC: do not enable modules by default
  amd64_edac: do not enable module by default
  amd64_edac: add module registration routines
  amd64_edac: add ECC reporting initializers
  amd64_edac: add EDAC core-related initializers
  amd64_edac: add error decoding logic
  amd64_edac: add ECC chipkill syndrome mapping table
  amd64_edac: add per-family descriptors
  amd64_edac: add F10h-and-later methods-p3
  amd64_edac: add F10h-and-later methods-p2
  amd64_edac: add F10h-and-later methods-p1
  amd64_edac: add k8-specific methods
  amd64_edac: assign DRAM chip select base and mask in a family-specific way
  amd64_edac: add helper to dump relevant registers
  amd64_edac: add DRAM address type conversion facilities
  amd64_edac: add functionality to compute the DRAM hole
  amd64_edac: add sys addr to memory controller mapping helpers
  amd64_edac: add memory scrubber interface
  amd64_edac: add MCA error types
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits)
  sh: Tie sparseirq in to Kconfig.
  sh: Wire up sys_rt_tgsigqueueinfo.
  sh: Fix sys_pwritev() syscall table entry for sh32.
  sh: Fix sh4a llsc-based cmpxchg()
  sh: sh7724: Add JPU support
  sh: sh7724: INTC setting update
  sh: sh7722 clock framework rewrite
  sh: sh7366 clock framework rewrite
  sh: sh7343 clock framework rewrite
  sh: sh7724 clock framework rewrite V3
  sh: sh7723 clock framework rewrite V2
  sh: add enable()/disable()/set_rate() to div6 code
  sh: add AP325RXA mode pin configuration
  sh: add Migo-R mode pin configuration
  sh: sh7722 mode pin definitions
  sh: sh7724 mode pin comments
  sh: sh7723 mode pin V2
  sh: rework mode pin code
  sh: clock div6 helper code
  sh: clock div4 frequency table offset fix
  ...

* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (138 commits)
  KVM: Prevent overflow in largepages calculation
  KVM: Disable large pages on misaligned memory slots
  KVM: Add VT-x machine check support
  KVM: VMX: Rename rmode.active to rmode.vm86_active
  KVM: Move "exit due to NMI" handling into vmx_complete_interrupts()
  KVM: Disable CR8 intercept if tpr patching is active
  KVM: Do not migrate pending software interrupts.
  KVM: inject NMI after IRET from a previous NMI, not before.
  KVM: Always request IRQ/NMI window if an interrupt is pending
  KVM: Do not re-execute INTn instruction.
  KVM: skip_emulated_instruction() decode instruction if size is not known
  KVM: Remove irq_pending bitmap
  KVM: Do not allow interrupt injection from userspace if there is a pending event.
  KVM: Unprotect a page if #PF happens during NMI injection.
  KVM: s390: Verify memory in kvm run
  KVM: s390: Sanity check on validity intercept
  KVM: s390: Unlink vcpu on destroy - v2
  KVM: s390: optimize float int lock: spin_lock_bh --> spin_lock
  KVM: s390: use hrtimer for clock wakeup from idle - v2
  KVM: s390: Fix memory slot versus run - v3
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: remove never-used in6_addr option
  cifs: add addr= mount option alias for ip=
  [CIFS] Add mention of new mount parm (forceuid) to cifs readme
  cifs: make overriding of ownership conditional on new mount options
  cifs: fix IPv6 address length check
  cifs: clean up set_cifs_acl interfaces
  cifs: reorganize get_cifs_acl
  [CIFS] Update readme to indicate change to default mount (serverino)
  cifs: make serverino the default when mounting
  cifs: rename cifs_iget to cifs_root_iget
  cifs: make cnvrtDosUnixTm take a little-endian args and an offset
  cifs: have cifs_NTtimeToUnix take a little-endian arg
  cifs: tighten up default file_mode/dir_mode
  cifs: fix artificial limit on reading symlinks

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (44 commits)
  nommu: Provide mmap_min_addr definition.
  TOMOYO: Add description of lists and structures.
  TOMOYO: Remove unused field.
  integrity: ima audit dentry_open failure
  TOMOYO: Remove unused parameter.
  security: use mmap_min_addr indepedently of security models
  TOMOYO: Simplify policy reader.
  TOMOYO: Remove redundant markers.
  SELinux: define audit permissions for audit tree netlink messages
  TOMOYO: Remove unused mutex.
  tomoyo: avoid get+put of task_struct
  smack: Remove redundant initialization.
  integrity: nfsd imbalance bug fix
  rootplug: Remove redundant initialization.
  smack: do not beyond ARRAY_SIZE of data
  integrity: move ima_counts_get
  integrity: path_check update
  IMA: Add __init notation to ima functions
  IMA: Minimal IMA policy and boot param for TCB IMA policy
  selinux: remove obsolete read buffer limit from sel_read_bool
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (49 commits)
  ext4: Avoid corrupting the uninitialized bit in the extent during truncate
  ext4: Don't treat a truncation of a zero-length file as replace-via-truncate
  ext4: fix dx_map_entry to support 256k directory blocks
  ext4: truncate the file properly if we fail to copy data from userspace
  ext4: Avoid leaking blocks after a block allocation failure
  ext4: Change all super.c messages to print the device
  ext4: Get rid of EXTEND_DISKSIZE flag of ext4_get_blocks_handle()
  ext4: super.c whitespace cleanup
  jbd2: Fix minor typos in comments in fs/jbd2/journal.c
  ext4: Clean up calls to ext4_get_group_desc()
  ext4: remove unused function __ext4_write_dirty_metadata
  ext2: Fix memory leak in ext2_fill_super() in case of a failed mount
  ext3: Fix memory leak in ext3_fill_super() in case of a failed mount
  ext4: Fix memory leak in ext4_fill_super() in case of a failed mount
  ext4: down i_data_sem only for read when walking tree for fiemap
  ext4: Add a comprehensive block validity check to ext4_get_blocks()
  ext4: Clean up ext4_get_blocks() so it does not depend on bh_result->b_state
  ext4: Merge ext4_da_get_block_write() into mpage_da_map_blocks()
  ext4: Add BUG_ON debugging checks to noalloc_get_block_write()
  ext4: Add documentation to the ext4_*get_block* functions
  ...

* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (28 commits)
  ide-tape: fix debug call
  alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  ide-dma: don't reset request fields on dma_timeout_retry()
  ide: drop rq->data handling from ide_map_sg()
  ide-atapi: kill unused fields and callbacks
  ide-tape: simplify read/write functions
  ide-tape: use byte size instead of sectors on rw issue functions
  ide-tape: unify r/w init paths
  ide-tape: kill idetape_bh
  ide-tape: use standard data transfer mechanism
  ide-tape: use single continuous buffer
  ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
  ide-tape,floppy: fix failed command completion after request sense
  ide-pm: don't abuse rq->data
  ide-cd,atapi: use bio for internal commands
  ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
  ide-cd: convert to using generic sense request
  ide: add helpers for preparing sense requests
  ide-cd: don't abuse rq->buffer
  ide-atapi: don't abuse rq->buffer
  ...

Slab is initialized before the console subsystem so use the slab allocator in
vgacon_scrollback_startup().
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Fixes the following problem:

[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:256
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e()
[    0.000000] Hardware name: To Be Filled By O.E.M.
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb
[    0.000000]  [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d
[    0.000000]  [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec
[    0.000000]  [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61
[    0.000000]  [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34
[    0.000000]  [<ffffffff823f757c>] early_irq_init+0x6d/0x118
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e0cf7>] start_kernel+0x192/0x394
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf
[    0.000000]  [<ffffffff823e0000>] ? __init_begin+0x0/0x140
[    0.000000]  [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2002.510 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Lets not use the bootmem allocator in cpupri_init() as slab is already up when
it is run.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Slab is initialized when sched_init() runs now so lets use alloc_cpumask_var().

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

The bootmem allocator is no longer available for page_cgroup_init() because we
set up the kernel slab allocator much earlier now.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Don't hardcode to node zero for early boot IRQ setup memory allocations.

[ penberg@cs.helsinki.fi: minor cleanups ]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Now that we set up the slab allocator earlier, we can get rid of some
alloc_bootmem_cpumask_var() calls in boot code.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Now that kmem_cache_init() happens before console_init(), we should use
kzalloc() and not the bootmem allocator.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Now that kmem_cache_init() happens before sched_init(), we should use kzalloc()
and not the bootmem allocator.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

As suggested by Christoph Lameter, introduce mm_init() now that we initialize
all the kernel memory allocations together.

Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

We can call vmalloc_init() after kmem_cache_init() and use kzalloc() instead of
the bootmem allocator when initializing vmalloc data structures.
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NNick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

This patch makes kmalloc() available earlier in the boot sequence so we can get
rid of some bootmem allocations. The bulk of the changes are due to
kmem_cache_init() being called with interrupts disabled which requires some
changes to allocator boostrap code.

Note: 32-bit x86 does WP protect test in mem_init() so we must setup traps
before we call mem_init() during boot as reported by Ingo Molnar:

  We have a hard crash in the WP-protect code:

  [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...BUG: Int 14: CR2 ffcff000
  [    0.000000]      EDI 00000188  ESI 00000ac7  EBP c17eaf9c  ESP c17eaf8c
  [    0.000000]      EBX 000014e0  EDX 0000000e  ECX 01856067  EAX 00000001
  [    0.000000]      err 00000003  EIP c10135b1   CS 00000060  flg 00010002
  [    0.000000] Stack: c17eafa8 c17fd410 c16747bc c17eafc4 c17fd7e5 000011fd f8616000 c18237cc
  [    0.000000]        00099800 c17bb000 c17eafec c17f1668 000001c5 c17f1322 c166e039 c1822bf0
  [    0.000000]        c166e033 c153a014 c18237cc 00020800 c17eaff8 c17f106a 00020800 01ba5003
  [    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #52203
  [    0.000000] Call Trace:
  [    0.000000]  [<c15357c2>] ? printk+0x14/0x16
  [    0.000000]  [<c10135b1>] ? do_test_wp_bit+0x19/0x23
  [    0.000000]  [<c17fd410>] ? test_wp_bit+0x26/0x64
  [    0.000000]  [<c17fd7e5>] ? mem_init+0x1ba/0x1d8
  [    0.000000]  [<c17f1668>] ? start_kernel+0x164/0x2f7
  [    0.000000]  [<c17f1322>] ? unknown_bootoption+0x0/0x19c
  [    0.000000]  [<c17f106a>] ? __init_begin+0x6a/0x6f
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

If the user requested bootmem allocation on a specific node, we should use
kzalloc_node() for the fallback allocation.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

As a preparation for initializing the slab allocator early, make sure the
bootmem allocator does not crash and burn if someone calls it after slab is up;
otherwise we'd need a flag day for switching to early slab.
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds a loadable module that deliberately leaks memory. It
is used for testing various memory leaking scenarios.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds the Kconfig.debug and Makefile entries needed for
building kmemleak into the kernel.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

There are allocations for which the main pointer cannot be found but
they are not memory leaks. This patch fixes some of them. For more
information on false positives, see Documentation/kmemleak.txt.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch handles the kmemleak operations needed for modules loading so
that memory allocations from inside a module are properly tracked.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>