Merge branch 'next/irq-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
This is redoing the s3c24xx irqs in a generic way by using a declarative
approach.

* 'next/irq-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  ARM: S3C24XX: transform irq handling into a declarative form
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge branch 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
Basically, this patch merges mach-s3c2410, mach-s3c2412 and mach-s3c2440
into mach-s3c24xx.

* 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: Move mach-s3c2440/ pll into mach-s3c24xx/
  ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into mach-s3c24xx/
  ARM: S3C24XX: Move mach-s3c2412/ cpufreq driver into mach-s3c24xx/
  ARM: S3C2412: Remove useless codes mach-s3c2412/gpio.c
  ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/
  ARM: S3C24XX: Move mach-s3c2410/ cpufreq into mach-s3c24xx/

Merge tag 'tegra-for-3.9-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup

From Stephen Warren:
ARM: tegra: cleanup

This pull request contains various cleanup and minor changes to core
Tegra code:
* Tegra clocksource driver is moved to drivers/clocksource.
* Various typos, warning cleanup, statics cleanup, section mismatch
  fixes, etc.
* Various small fixes/cleanups for CPU/hotplug/SMP code.

This pull request is based on a merge of v3.8-rc3 and at least part of
arm-soc's timer/cleanup branch.

* tag 'tegra-for-3.9-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: fix compile error when disable CPU_IDLE
  ARM: tegra30: make the wait time of CPU power up to proportional to HZ
  ARM: tegra: make device can run on UP
  ARM: tegra: clean up the CPUINIT section
  ARM: tegra: moving the clock gating procedure to tegra_cpu_kill
  ARM: tegra: update the cache maintenance order for CPU shutdown
  ARM: tegra30: fix power up sequence for boot_secondary
  ARM: tegra: cpufreq: move clk_get/put out of function tegra_cpu_init/exit
  ARM: tegra: fix Kconfig warnings when !SMP
  ARM: tegra: Make variables static
  clocksource: tegra: cosmetic: Fix error message
  ARM: tegra: move timer.c to drivers/clocksource/
Signed-off-by: NOlof Johansson <olof@lixom.net>

Trivial conflicts:
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	drivers/clocksource/Makefile

Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup

From Shawn Guo:
The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which
are unused on ARM architecure.  Samsung has some code setting up wdog
in arch_decomp_wdog().  But since CONFIG_S3C_BOOT_WATCHDOG is defined
nowhere, it will not run.  Otherwise, system can not boot at all when
wdog is set up but no one pats it.

* tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: samsung: remove unused arch_decomp_wdog() code
  ARM: remove unused arch_decomp_wdog()
  ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'cleanup_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux into next/cleanup

From Jason Cooper:
cleanup for v3.9 round2
 - remove unneeded #includes for mach-dove
 - remove unneeded #includes and code for the nsa310

* tag 'cleanup_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux:
  ARM: dove: cleanup includes
  ARM: kirkwood: nsa310: cleanup includes and unneeded code

Merge branch 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:
AS I commented, this makes <mach/*.h> local so that they could be removed.

* 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (26 commits)
  ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled
  ARM: S3C64XX: make regs-syscon-power.h local
  ARM: S3C64XX: make regs-sys.h local
  ARM: S3C64XX: make regs-srom.h local
  ARM: S3C64XX: make regs-modem.h local
  ARM: S3C64XX: make regs-gpio-memport.h local
  ARM: S3C64XX: make crag6410.h local
  ARM: S3C24XX: remove dsc.c and make regs-dsc.h local
  ARM: S3C24XX: remove idle.h
  ARM: S3C2412: cleanup regs-s3c2412.h
  ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h
  ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local
  ARM: S3C24XX: make otom-map.h local
  ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local
  ARM: S3C24XX: make h1940.h and h1940-latch.h local
  ARM: S3C24XX: make gta02.h local
  ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local
  ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local
  ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h
  ARM: SAMSUNG: cleanup mach/regs-audss.h file
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Share the common irq code by simply defining a correct mapping declaration
for the s3c2443.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Previously the irq init used s3c24xx_init_irq and an additional
arch_initcall to add the cpu specific irqs.

To be able to simplyfy the irq init later, create a new function
s3c2443_init_irq, which then calls s3c24xx_init_irq but also adds
the cpu specific irqs.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Prequisite for further optimizations.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Share the common irq code by simply defining a correct mapping declaration
for the s3c2416.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Previously the irq init used s3c24xx_init_irq and an additional
arch_initcall to add the cpu specific irqs.

To be able to simplyfy the irq init later, create a new function
s3c416_init_irq, which then calls s3c24xx_init_irq but also adds
the cpu specific irqs.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This is needed to further clean up the irq init.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This gets rid of the use of static irq mappings there.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With this the definition of s3c24xx_irq_syscore_ops can also move to
common.h from plat/pm.h and the definitions of s3c24xx_irq_suspend
and s3c24xx_irq_resume are also not necessary anymore in plat/pm.h
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This allows clocksource drivers that support both DT and non-DT to
always invoke macro CLOCKSOURCE_OF_DECLARE(), rather than wrapping
it in a #ifdef CONFIG_CLKSRC_OF, which simplifies their code.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit 6bb27d73 "ARM: delete struct sys_timer" caused the following:

arch/arm/mach-imx/imx31-dt.c:56:2: warning: initialization from incompatible pointer type [enabled by default]
arch/arm/mach-imx/imx31-dt.c:56:2: warning: (near initialization for ‘__mach_desc_IMX31_DT.init_time’) [enabled by default]

This is because mx31_clocks_init_dt() returns int, whereas the .init_time
field prototype expects a function returning void. Implement a wrapper so
that the prototypes match.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch cleans unneccessary includes and reorders the remaining
includes in common dove code.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

After removing the unneeded linux/i2c.h, linux/of.h was needed for
of_machine_is_compatible().  i2c.h had included of.h.
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

From Michal Simek, this is a series of cleanups to timer code on zynq platforms.

* 'zynq/timer' of git://git.xilinx.com/linux-xlnx:
  arm: zynq: timer: Set clock_event cpumask
  arm: zynq: timer: Fix comment style
  arm: zynq: timer: Remove redundant #includes
  arm: zynq: timer: Align columns
  arm: zynq: timer: Remove unused #defines
  arm: zynq: timer: Remove unnecessary register write
  arm: zynq: timer: Replace PSS through PS
  arm: zynq: Add missing irqchip.h to common.c

Merge tag 'ux500-no-idh' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup

From Linus Walleij:
Removal of the <mach/id.h> include from ux500
- First an ACKed MFD patch deleting the only consumer
  of these cpu_is* functions outside of mach-ux500
- Introduce a new local cpu_is_u8580() in this patch
  set to avoid clashing with other patch sets.
- Finally de-globalize <mach/id.h>.

* tag 'ux500-no-idh' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: de-globalize <mach/id.h>
  ARM: ux500: Introduce cpu_is_u8580()
  mfd: prcmu: delete pin control helpers
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'cleanup_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux into next/cleanup

From Jason Cooper:
cleanup for v3.9 round2
 - remove unneeded #includes for mach-dove
 - remove unneeded #includes and code for the nsa310

* tag 'cleanup_for_v3.9_round2' of git://git.infradead.org/users/jcooper/linux:
  ARM: dove: cleanup includes
  ARM: kirkwood: nsa310: cleanup includes and unneeded code

This patch cleans unneccessary includes and reorders the remaining
includes in common dove code.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

After removing the unneeded linux/i2c.h, linux/of.h was needed for
of_machine_is_compatible().  i2c.h had included of.h.
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

The patch: "ARM: use common irqchip_init for GIC init"
(sha1: 0529e315)
should also add linux/irqchip.h header.

Error message:
arch/arm/mach-zynq/common.c:99:14: error: 'irqchip_init'
  undeclared here (not in a function)
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The irqs available on the machine and even the bit settings in the
irq registers differ a lot through all the s3c24xx subarchitectures.
This results in each subarch having its own irq init which adds its
specific irqs to the base ones created in plat-s3c24xx/irq.c.

This of course makes a future move to devicetree hard to implement.

Therefore this patch transforms the base irq handling to a declarative
style, where the irq types as well as its parent/child relationship
gets read from a predefined datastructure, which later on can hopefully
be easily represented in devicetree too.

It should also be easy to include the subarch specific irqs here
in later patches, reducing code size and duplication.

It should not affect anything outside of the file, as the original
irq numbers and their handling are preserved (hopefully) correctly.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Merge tag 'bcm2835-for-3.9-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/cleanup

From Stephen Warren:
ARM: bcm2835: cleanup

This pull request simply converts the bcm2835 clocksource driver to use
the recently added CLKSRC_OF feature.

The branch is based on v3.8-rc3, followed by a merge of arm-soc's
timer/cleanup branch.

* tag 'bcm2835-for-3.9-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi:
  ARM: bcm2835: make use of CLKSRC_OF
Signed-off-by: NOlof Johansson <olof@lixom.net>

This removes the file <mach/id.h> from the global kernel include
scope, making it a pure mach-ux500 detail. All ASIC specifics
needed by drivers shall henceforth be passed from either platform
data or the device tree.

Cc: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Detect the subrevision v1 of U8540 and U8580.

DB8580 is the FDSOI variant of DB8540. Some differences
with DB8540 related to clocks will need to be checked with
a cpu_is_u8580() function.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

These static inlines are duplicating the task now done by the
Nomadik pinctrl drivers, so delete them from the prcmu static
inlines, also delete the register definitions as these should
only be known by the pinctrl driver.

Cc: Loic Pallardy <loic.pallardy@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Michel Jaouen <michel.jaouen@st.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

From Shawn Guo:

IMX cleanup for 3.9:
 * Remove lluart.c by using debug_ll_io_init()
 * Remove mach-mx51_3ds board support
 * Remove imx50 support which has been BROKEN for cycles
 * Other trival cleanups

* tag 'imx-cleanup-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx: Remove mx508 support
  ARM: imx: Remove mach-mx51_3ds board
  ARM: imx: use debug_ll_io_init() for imx6q
  ARM: imx: remove unused imx6q_clock_map_io()
  ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT
Signed-off-by: NOlof Johansson <olof@lixom.net>

Change/delete conflicts due to some of the previous sweeping cleanups in:
	arch/arm/mach-imx/mach-mx50_rdp.c
	arch/arm/mach-imx/mach-mx51_3ds.c

Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN
for several releases.

mx508 currently lacks clock support.

In case someone needs to add mx508 support back, then the recommended approach
is to use device tree.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

mach-mx51_3ds only supports old silicon version of MX51 and was replaced
with mx51 babbage, which is the official MX51 development board.

No need to maintain it anymore.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Use debug_ll_io_init() to map low level debug port for imx6q, so that
arch/arm/mach-imx/lluart.c can be removed.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

imx6q_clock_map_io() becomes an empty function since imx6q clock driver
is moved to common clock framework.  It's used nowhere now.  Remove it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The "sleep.S" file has many functions that be shared by different module
currently. Not just for CPU idle driver. Make it build as default now.
Reported-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
[swarren: add sleep.o to separate line so each line only contains 1 file]
Signed-off-by: NStephen Warren <swarren@nvidia.com>

It would rather to use the API of time_to_jiffies than a constant number
of jiffies for the wait time of CPU power up.

Based on the work by:
Sang-Hun Lee <sanlee@nvidia.com>
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

The reset handler code is used for either UP or SMP. To make Tegra device
can compile for UP. It needs to be moved to another file that is not SMP
only. This is because the reset handler also be needed by CPU idle
"powered-down" mode. So we also need to put the reset handler init function
in non-SMP only and init them always.

And currently the implementation of the reset handler to know which CPU is
OK to bring up was identital with "cpu_present_mask". But the
"cpu_present_mask" did not initialize yet when the reset handler init
function was moved to init early function. We use the "cpu_possible_mask"
to replace "cpu_present_mask". Then it can work on both UP and SMP case.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
[swarren: dropped the move of v7_invalidate_l1() from one file to another,
to avoid conflicts with Pavel's cleanup of this function, adjust Makefile
so each line only contains 1 file.]
Signed-off-by: NStephen Warren <swarren@nvidia.com>

There are some redundant codes in the CPUINIT section that was caused by
some codes not be organized well in "headsmp.S". Currently all the codes
in "headsmp.S" were put into CPUINIT section. But actually it doesn't
need to be loacted in CPUINIT section. There is no fuction access them
in CPUINIT section and we will relocate them to IRAM.

These codes also caused some unnecessary functions that access these
codes been put into CPUINIT section too. This patch clean it up and put
them into normal text section.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

The tegra_cpu_die was be executed by the CPU itslf. So the clock gating
procedure won't be executed after the CPU hardware shutdown code. Moving
the clock gating procedure to tegra_cpu_kill that will be run by another
CPU after the CPU died.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Acked-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>