Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Mitchell Blank Jr <mitch@sfgoth.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Jan Pieter <pptp@jp.dhs.org>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMitchell Blank Jr <mitch@sfgoth.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMitchell Blank Jr <mitch@sfgoth.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Mitchell Blank Jr <mitch@sfgoth.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  The tcp_ehash hash table gets too big on systems with really big memory.
It is worse on systems with pages larger than 4KB.  It wastes memory that
could be better used.  It also makes the netstat command slow because reading
/proc/net/tcp and /proc/net/tcp6 needs to go through the full hash table.

  The default value should not be larger for larger page sizes.  It seems
that the effect of page size is an unintended error dating back a long
time.  I also wonder if the default value really should be a larger
fraction of memory for systems with more memory.  While systems with
really big ram can afford more space for hash tables, it is not clear to
me that they benefit from increasing the allocation ratio for this table.

  The amount of memory allocated is determined by net/ipv4/tcp.c:tcp_init and
mm/page_alloc.c:alloc_large_system_hash.

tcp_init calls alloc_large_system_hash passing parameters-
    bucketsize=sizeof(struct tcp_ehash_bucket)
    numentries=thash_entries
    scale=(num_physpages >= 128 * 1024) ? (25-PAGE_SHIFT) : (27-PAGE_SHIFT)
    limit=0

On i386, PAGE_SHIFT is 12 for a page size of 4K
On ia64, PAGE_SHIFT defaults to 14 for a page size of 16K

The num_physpages test above makes the allocation take a larger fraction
of the total memory on systems with larger memory.  The threshold size
for a i386 system is 512MB.  For an ia64 system with 16KB pages the
threshold is 2GB.

For smaller memory systems-
On i386, scale = (27 - 12) = 15
On ia64, scale = (27 - 14) = 13
For larger memory systems-
On i386, scale = (25 - 12) = 13
On ia64, scale = (25 - 14) = 11

  For the rest of this discussion, I'll just track the larger memory case.

  The default behavior has numentries=thash_entries=0, so the allocated
size is determined by either scale or by the default limit of 1/16 of
total memory.

In alloc_large_system_hash-
|	numentries = (flags & HASH_HIGHMEM) ? nr_all_pages : nr_kernel_pages;
|	numentries += (1UL << (20 - PAGE_SHIFT)) - 1;
|	numentries >>= 20 - PAGE_SHIFT;
|	numentries <<= 20 - PAGE_SHIFT;

  At this point, numentries is pages for all of memory, rounded up to the
nearest megabyte boundary.

|	/* limit to 1 bucket per 2^scale bytes of low memory */
|	if (scale > PAGE_SHIFT)
|		numentries >>= (scale - PAGE_SHIFT);
|	else
|		numentries <<= (PAGE_SHIFT - scale);

On i386, numentries >>= (13 - 12), so numentries is 1/8196 of
bytes of total memory.
On ia64, numentries <<= (14 - 11), so numentries is 1/2048 of
bytes of total memory.

|        log2qty = long_log2(numentries);
|
|        do {
|                size = bucketsize << log2qty;

bucketsize is 16, so size is 16 times numentries, rounded
down to a power of two.

On i386, size is 1/512 of bytes of total memory.
On ia64, size is 1/128 of bytes of total memory.

For smaller systems the results are
On i386, size is 1/2048 of bytes of total memory.
On ia64, size is 1/512 of bytes of total memory.

  The large page effect can be removed by just replacing
the use of PAGE_SHIFT with a constant of 12 in the calls to
alloc_large_system_hash.  That makes them more like the other uses of
that function from fs/inode.c and fs/dcache.c
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 252ac865.

It impacts the LSI customers using the mptstm target mode drivers
(source tar-ball at

  ftp://ftp.lsil.com/HostAdapterDrivers/linux/Fusion-MPT/mptstm-1.00.13-src.tar.gz

for those who care).
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use copy_user_highpage directly instead of cow_user_page in do_no_page:
in the immediately following page_cache_release, and elsewhere, it is
assuming that new_page is normal.  If any VM_PFNMAP driver can get to
do_no_page, it's just a BUG (but not in the case of do_anonymous_page).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean away do_wp_page's "src_page": cow_user_page makes it unnecessary.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

High Dickins points out that the user virtual address passed to the page
fault handler isn't necessarily page-aligned.

Also, add a comment on why the copy could fail for the user address case.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This logic was duplicated four times, for no good reason.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Increment the PFN field of the PTE so that the tests
on vm_pfn in mm/memory.c match up.  The TLB ignores these
lower bits for larger page sizes, so it's OK to set things
like this.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes locking in megaraid.c, namely:

 (1) make sure megaraid_queue release the adapter lock by changing the
     code to have a single return
 (2) remove the errornous scsi_assign_lock call

Testing by Burton Windle.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NBurton Windle <bwindle@fint.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These get created by some drivers that don't generally even want a pfn
remapping at all, but would really mostly prefer to just map pages
they've allocated individually instead.

For now, create a helper function that turns such an incomplete PFN
remapping call into a loop that does that explicit mapping.  In the long
run we almost certainly want to export a totally different interface for
that, though.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I image this showed up because of "unused var..." when the changes
occured, because flush_cache_page() is a noop in most places.  This
showed up for me on parisc however, where flush_cache_page() is a real
function.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch contains the following possible cleanups:
- every file should #include the headers containing the prototypes for
  it's global functions
- make needlessly global functions static
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Update the pre-CFI Sharp driver sharps.c so it compiles.  map_read32 /
map_write32 no longer exist in the kernel so the driver is totally broken
as it stands.  The replacement functions use different parameters resulting
in the other changes.

Change collie to use this driver until someone works out why the cfi driver
fails on that machine.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Tested-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove disfunctional driver, which slipped through the review mechanism
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The patch below fixes the following sparse warning:

drivers/mtd/maps/nettel.c:482:27: warning: Using plain integer as NULL pointer
Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

arjan: drivers/mtd/maps/sc520cdp.c:167: warning: par_table is never written to and should be declared 'const'
arjan: drivers/mtd/maps/pci.c:105: warning: mtd_pci_map is never written to and should be declared 'const'
arjan: mind fixing those up ?
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

ixp4xx updates:
  - Handle reads that don't start on a half-word boundary.
  - Make it work when CPU is in little-endian mode.
Signed-off-by: NJohn Bowler <jbowler@acm.org>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NDavid Vrabel <dvrabel@arcom.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Recent models of Intel/Sharp and Spansion CFI flash now have significant
bits in the upper byte of device ID codes, read via what Spansion calls
"autoselect" and Intel calls "read device identifier".  Currently these
values are truncated to the low 8 bits in the mtd data structures, as
all CFI read query info has previously been read one byte at a time.
Add a new method for reading 16-bit info, currently just manufacturer
and device codes; datasheets hint at future uses for upper bytes in
other fields.
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Merge from linux-mips:
Use physical addresses at the interface level, letting drivers remap
them as appropriate.
Signed-off-by: NMaciej W. Rozycki <macro@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

break.b always sets cr.iim to 0 and the current code tries to
get the break_num by decoding instruction. However, their
seems to be a race condition while reading the regs->cr_iip,
as on other cpu the break.b at regs->cr_iip might have been
replaced with the original instruction as a result of
unregister_kprobe() and hence decoding instruction to
obtain break_num will result in wrong value in this case.

Also includes changes to kprobes.c which now has to handle
break number zero.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

A single SGI Altix system can be divided into multiple partitions,
each running their own instance of the Linux kernel.  pfn_valid()
is currently not optimal for any but the first partition, since it
does not compare the pfn with min_low_pfn before calling the more
costly ia64_pfn_valid().
Signed-off-by: NDean Roe <roe@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

JFFS2 initialize f->sem mutex as "locked" in the slab constructor which is a
bug. Objects are freed with unlocked f->sem mutex. So, when they allocated
again, f->sem is unlocked because the slab cache constructor is not called for
them. The constructor is called only once when memory pages are allocated for
objects (namely, when the slab layer allocates new slabs). So, sometimes
'struct jffs2_inode_info' are allocated with unlocked f->sem, sometimes with
locked. This is a bug. Instead, initialize f->sem as unlocked in the
constructor. I.e., in the "constructed" state f->sem must be unlocked.

From: Keijiro Yano <keijiro_yano@yahoo.co.jp>
Acked-by: NArtem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The system call gate area handling called vm_normal_page() with the
wrong vma (which was always NULL, and caused an oops).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A major block device number is now assigned by lanana.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Ensure to update hiscore.rule in dummy rule 4 in ipv6_dev_get_saddr().
Pointed out by Yan Zheng <yanzheng@21cn.com>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both 32-bit and 64-bit use the same inline flush_icache_range definition
now, so both need to export __flush_icache_range, not just 64-bit.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Export symbol needed to allow MOL to run. This was changed to be inline
in past and forgot to be change here.
Signed-off-by: NPaul Mackerras <paulus@samba.org>