WEXT's "struct iw_freq" can also be used to handle a channel. This patch now
uses cfg80211_wext_freq() instead of hand-converting the frequency. That
allows user-space to specify channels as well, like with SIOCSIWFREQ.
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When processing MIB interrupts, OFDM and CCK error
handling routines for low RSSI values have to be invoked
only when the channel mode is 11G/11B. Since HT channels
will also fall under the bands 2Ghz/5Ghz, check appropriately.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Force wake the mac80211 queues on init.
Under rare circumstances they may be stopped, if a DMA error or
something else causes a device reset while a queue was stopped.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

As the hostap driver was converted to use net_device_ops, a mistake was
made in hostap_main.c (commit 5ae4efbc).
Originally, the tx_queue_len was set to 0 for every other interface than
HOSTAP_INTERFACE_MASTER, but the new fragment of code sets tx_queue_len to
0 only for HOSTAP_INTERFACE_MASTER. The opposite of the previous
behavior makes the driver to drop all packets in AP mode.

Change the way 0 is assigned to tx_queue_len according to the original
logic.
Signed-off-by: NMartin Decky <martin@decky.cz>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

* 'osync_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  fsync: wait for data writeout completion before calling ->fsync
  vfs: Remove generic_osync_inode() and sync_page_range{_nolock}()
  fat: Opencode sync_page_range_nolock()
  pohmelfs: Use new syncing helper
  xfs: Convert sync_page_range() to simple filemap_write_and_wait_range()
  ocfs2: Update syncing after splicing to match generic version
  ntfs: Use new syncing helpers and update comments
  ext4: Remove syncing logic from ext4_file_write
  ext3: Remove syncing logic from ext3_file_write
  ext2: Update comment about generic_osync_inode
  vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode
  vfs: Rename generic_file_aio_write_nolock
  ocfs2: Use __generic_file_aio_write instead of generic_file_aio_write_nolock
  pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock
  vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write()
  vfs: Export __generic_file_aio_write() and add some comments
  vfs: Introduce filemap_fdatawait_range

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Whitespace fixes
  GFS2: Remove unused sysfs file
  GFS2: Be extra careful about deallocating inodes
  GFS2: Remove no_formal_ino generating code
  GFS2: Rename eattr.[ch] as xattr.[ch]
  GFS2: Clean up of extended attribute support
  GFS2: Add explanation of extended attr on-disk format
  GFS2: Add "-o errors=panic|withdraw" mount options
  GFS2: jumping to wrong label?
  GFS2: free disk inode which is deleted by remote node -V2
  GFS2: Add a document explaining GFS2's uevents
  GFS2: Add sysfs link to device
  GFS2: Replace assertion with proper error handling
  GFS2: Improve error handling in inode allocation
  GFS2: Add some more info to uevents
  GFS2: Add online uevent to GFS2

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Fix possible corruption when close races with write
  udf: Perform preallocation only for regular files
  udf: Remove wrong assignment in udf_symlink
  udf: Remove dead code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (21 commits)
  fs/Kconfig: move nilfs2 outside misc filesystems
  nilfs2: convert nilfs_bmap_lookup to an inline function
  nilfs2: allow btree code to directly call dat operations
  nilfs2: add update functions of virtual block address to dat
  nilfs2: remove individual gfp constants for each metadata file
  nilfs2: stop zero-fill of btree path just before free it
  nilfs2: remove unused btree argument from btree functions
  nilfs2: remove nilfs_dat_abort_start and nilfs_dat_abort_free
  nilfs2: shorten freeze period due to GC in write operation v3
  nilfs2: add more check routines in mount process
  nilfs2: An unassigned variable is assigned to a never used structure member
  nilfs2: use GFP_NOIO for bio_alloc instead of GFP_NOWAIT
  nilfs2: stop using periodic write_super callback
  nilfs2: clean up nilfs_write_super
  nilfs2: fix disorder of nilfs_write_super in nilfs_sync_fs
  nilfs2: remove redundant super block commit
  nilfs2: implement nilfs_show_options to display mount options in /proc/mounts
  nilfs2: always lookup disk block address before reading metadata block
  nilfs2: use semaphore to protect pointer to a writable FS-instance
  nilfs2: fix format string compile warning (ino_t)
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: consolidate reconnect logic in smb_init routines
  cifs: Replace wrtPending with a real reference count
  cifs: protect GlobalOplock_Q with its own spinlock
  cifs: use tcon pointer in cifs_show_options
  cifs: send IPv6 addr in upcall with colon delimiters
  [CIFS] Fix checkpatch warnings
  PATCH] cifs: fix broken mounts when a SSH tunnel is used (try #4)
  [CIFS] Memory leak in ntlmv2 hash calculation
  [CIFS] potential NULL dereference in parse_DFS_referrals()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (21 commits)
  sparc64: Initial niagara2 perf counter support.
  sparc64: Perf counter 'nop' event is not constant.
  sparc64: Provide a way to specify a perf counter overflow IRQ enable bit.
  sparc64: Provide hypervisor tracing bit support for perf counters.
  sparc64: Initial hw perf counter support.
  sparc64: Implement a real set_perf_counter_pending().
  sparc64: Use nmi_enter() and nmi_exit(), as needed.
  sparc64: Provide extern decls for sparc_??u_type strings.
  sparc64: Make touch_nmi_watchdog() actually work.
  sparc64: Kill unnecessary cast in profile_timer_exceptions_notify().
  sparc64: Manage NMI watchdog enabling like x86.
  sparc: add basic support for 'perf'
  sparc: convert /proc/io_map, /proc/dvma_map to seq_file
  sparc, leon: sparc-leon specific SRMMU initialization and bootup fixes.
  sparc,leon: Added support for AMBAPP bus.
  sparc,leon: Introduce the sparc-leon CPU type.
  sparc,leon: Redefine MMU register access asi if CONFIG_LEON
  sparc,leon: CONFIG_SPARC_LEON option and leon specific files.
  sparc64: cheaper asm/uaccess.h inclusion
  SPARC: fix duplicate declaration
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.

* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: split __phys_addr out into separate file
  xen: use stronger barrier after unlocking lock
  xen: only enable interrupts while actually blocking for spinlock
  xen: make -fstack-protector work under Xen

When we close a file, we remove preallocated blocks from it. But this
truncation was not protected by i_mutex and thus it could have raced with a
write through a different fd and cause crashes or even filesystem corruption.
Signed-off-by: NJan Kara <jack@suse.cz>

So far we preallocated blocks also for directories but that brings a
problem, when to get rid of preallocated blocks we don't need. So far
we removed them in udf_clear_inode() which has a disadvantage that
1) blocks are unavailable long after writing to a directory finished
   and thus one can get out of space unnecessarily early
2) releasing blocks from udf_clear_inode is problematic because VFS
   does not expect us to redirty inode there and it also slows down
   memory reclaim.

So preallocate blocks only for regular files where we can drop preallocation
in udf_release_file.
Signed-off-by: NJan Kara <jack@suse.cz>

Recomputation of the pointer was wrong (it should have been just increment).
Luckily, we never use the computed value. Remove it.
Signed-off-by: NJan Kara <jack@suse.cz>

Remove code that gets never used.
Signed-off-by: NJan Kara <jack@suse.cz>

Currenly vfs_fsync(_range) first calls filemap_fdatawrite to write out
the data, the calls into ->fsync to write out the metadata and then finally
calls filemap_fdatawait to wait for the data I/O to complete.  What sounds
like a clever micro-optimization actually is nast trap for many filesystems.

For many modern filesystems i_size or other inode information is only
updated on I/O completion and we need to wait for I/O to finish before
we can write out the metadata.  For old fashionen filesystems that
instanciate blocks during the actual write and also update the metadata
at that point it opens up a large window were we could expose uninitialized
blocks after a crash.  While a few filesystems that need it already wait
for the I/O to finish inside their ->fsync methods it is rather suboptimal
as it is done under the i_mutex and also always for the whole file instead
of just a part as we could do for O_SYNC handling.

Here is a small audit of all fsync instances in the tree:

 - spufs_mfc_fsync:
 - ps3flash_fsync:
 - vol_cdev_fsync:
 - printer_fsync:
 - fb_deferred_io_fsync:
 - bad_file_fsync:
 - simple_sync_file:

	don't care - filesystems/drivers do't use the page cache or are
	purely in-memory.

 - simple_fsync:
 - file_fsync:
 - affs_file_fsync:
 - fat_file_fsync:
 - jfs_fsync:
 - ubifs_fsync:
 - reiserfs_dir_fsync:
 - reiserfs_sync_file:

	never touch pagecache themselves.  We need to wait before if we do
	not want to expose stale data after an allocation.

 - afs_fsync:
 - fuse_fsync_common:

	do the waiting writeback itself in awkward ways, would benefit from
	proper semantics

 - block_fsync:

	Does a filemap_write_and_wait on the block device inode.  Because we
	now have f_mapping that is the same inode we call it on in vfs_fsync.
	So just removing it and letting the VFS do the work in one go would
	be an improvement.

 - btrfs_sync_file:
 - cifs_fsync:
 - xfs_file_fsync:

	need the wait first and currently do it themselves. would benefit from
	doing it outside i_mutex.

 - coda_fsync:
 - ecryptfs_fsync:
 - exofs_file_fsync:
 - shm_fsync:

	only passes the fsync through to the lower layer

 - ext3_sync_file:

	doesn't seem to care, comments are confusing.

 - ext4_sync_file:

	would need the wait to work correctly for delalloc mode with late
	i_size updates.  Otherwise the ext3 comment applies.

	currently implemens it's own writeback and wait in an odd way,
	could benefit from doing it properly.

 - gfs2_fsync:

	not needed for journaled data mode, but probably harmless there.
	Currently writes back data asynchronously itself.  Needs some
	major audit.

 - hostfs_fsync:

	just calls fsync/datasync on the host FD.  Without the wait before
	data might not even be inflight yet if we're unlucky.

 - hpfs_file_fsync:
 - ncp_fsync:

	no-ops.  Dangerous before and after.

 - jffs2_fsync:

	just calls jffs2_flush_wbuf_gc, not sure how this relates to data.

 - nfs_fsync_dir:

	just increments stats, claims all directory operations are synchronous

 - nfs_file_fsync:

	only writes out data???  Looks very odd.

 - nilfs_sync_file:

	looks like it expects all data done, but not sure from the code

 - ntfs_dir_fsync:
 - ntfs_file_fsync:

	appear to do their own data writeback.  Very convoluted code.

 - ocfs2_sync_file:

	does it's own data writeback, but no wait.  probably needs the wait.

 - smb_fsync:

	according to a comment expects all pages written already, probably needs
	the wait before.

This patch only changes vfs_fsync_range, removal of the wait in the methods
that have it is left to the filesystem maintainers.  Note that most
filesystems really do need an audit for their fsync methods given the
gems found in this very brief audit.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Remove these three functions since nobody uses them anymore.
Signed-off-by: NJan Kara <jack@suse.cz>

fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the
only user of generic_osync_inode() which does not have a file open.  So
opencode needed actions for FAT so that we can convert generic_osync_inode() to
a standard syncing path.

Update a comment about generic_osync_inode().

CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NJan Kara <jack@suse.cz>

Use new generic_write_sync() helper instead of sync_page_range().
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NJan Kara <jack@suse.cz>

Christoph Hellwig says that it is enough for XFS to call
filemap_write_and_wait_range() instead of sync_page_range() because we do
all the metadata syncing when forcing the log.

CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Update ocfs2 specific splicing code to use generic syncing helper. The sync now
does not happen under rw_lock because generic_write_sync() acquires i_mutex
which ranks above rw_lock. That should not matter because standard fsync path
does not hold it either.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: NJan Kara <jack@suse.cz>

Use new syncing helpers in .write and .aio_write functions. Also
remove superfluous syncing in ntfs_file_buffered_write() and update
comments about generic_osync_inode().

CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
Signed-off-by: NJan Kara <jack@suse.cz>

The syncing is now properly handled by generic_file_aio_write() so
no special ext4 code is needed.

CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Signed-off-by: NJan Kara <jack@suse.cz>

Syncing is now properly done by generic_file_aio_write() so no special logic is
needed in ext3.

CC: linux-ext4@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

We rely on generic_write_sync() now.

CC: linux-ext4@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

Introduce new function for generic inode syncing (vfs_fsync_range) and use
it from fsync() path. Introduce also new helper for syncing after a sync
write (generic_write_sync) using the generic function.

Use these new helpers for syncing from generic VFS functions. This makes
O_SYNC writes to block devices acquire i_mutex for syncing. If we really
care about this, we can make block_fsync() drop the i_mutex and reacquire
it before it returns.

CC: Evgeniy Polyakov <zbr@ioremap.net>
CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

generic_file_aio_write_nolock() is now used only by block devices and raw
character device. Filesystems should use __generic_file_aio_write() in case
generic_file_aio_write() doesn't suit them. So rename the function to
blkdev_aio_write() and move it to fs/blockdev.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Use the new helper. We have to submit data pages ourselves in case of O_SYNC
write because __generic_file_aio_write does not do it for us. OCFS2 developpers
might think about moving the sync out of i_mutex which seems to be easily
possible but that's out of scope of this patch.

CC: ocfs2-devel@oss.oracle.com
Acked-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Use new helper __generic_file_aio_write(). Since the fs takes care of syncing
by itself afterwards, there are no more changes needed.

CC: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NJan Kara <jack@suse.cz>

generic_file_direct_write() and generic_file_buffered_write() called
generic_osync_inode() if it was called on O_SYNC file or IS_SYNC inode. But
this is superfluous since generic_file_aio_write() does the syncing as well.
Also XFS and OCFS2 which call these functions directly handle syncing
themselves. So let's have a single place where syncing happens:
generic_file_aio_write().

We slightly change the behavior by syncing only the range of file to which the
write happened for buffered writes but that should be all that is required.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
Signed-off-by: NJan Kara <jack@suse.cz>

Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add
comments to write helpers explaining how they should be used and export
__generic_file_aio_write() since it will be used by some filesystems.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

This simple helper saves some filesystems conversion from byte offset
to page numbers and also makes the fdata* interface more complete.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, e820: Guard against array overflowed in __e820_add_region()
  x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables

Merge branch 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, percpu: Collect hot percpu variables into one cacheline
  x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED()
  x86, percpu: Add 'percpu_read_stable()' interface for cacheable accesses

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, highmem_32.c: Clean up comment
  x86, pgtable.h: Clean up types
  x86: Clean up dump_pagetable()

Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Simplify the Makefile in a minor way through use of cc-ifversion

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64: move clts into batch cpu state updates when preloading fpu
  x86-64: move unlazy_fpu() into lazy cpu state part of context switch
  x86-32: make sure clts is batched during context switch
  x86: split out core __math_state_restore

Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Decrease the level of some NUMA messages to KERN_DEBUG

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  x86: Fix code patching for paravirt-alternatives on 486
  x86, msr: change msr-reg.o to obj-y, and export its symbols
  x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus
  x86, sched: Workaround broken sched domain creation for AMD Magny-Cours
  x86, mcheck: Use correct cpumask for shared bank4
  x86, cacheinfo: Fixup L3 cache information for AMD multi-node processors
  x86: Fix CPU llc_shared_map information for AMD Magny-Cours
  x86, msr: Fix msr-reg.S compilation with gas 2.16.1, on 32-bit too
  x86: Move kernel_fpu_using to irq_fpu_usable in asm/i387.h
  x86, msr: fix msr-reg.S compilation with gas 2.16.1
  x86, msr: Export the register-setting MSR functions via /dev/*/msr
  x86, msr: Create _on_cpu helpers for {rw,wr}msr_safe_regs()
  x86, msr: Have the _safe MSR functions return -EIO, not -EFAULT
  x86, msr: CFI annotations, cleanups for msr-reg.S
  x86, asm: Make _ASM_EXTABLE() usable from assembly code
  x86, asm: Add 32-bit versions of the combined CFI macros
  x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit
  x86, msr: Rewrite AMD rd/wrmsr variants
  x86, msr: Add rd/wrmsr interfaces with preset registers
  x86: add specific support for Intel Atom architecture
  ...