- 22 12月, 2011 10 次提交
-
-
由 Eliot Blennerhassett 提交于
Add "Internal" node type. Remove GPI and GPO node types. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
The channel count can be queried to determine which. Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Unlike other streams which support 1..max channels, Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
and update HPI version to 4.10 Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Eliot Blennerhassett 提交于
Elapsed counter should only count data committed to snd_pcm_period_elapsed, rather than all data available Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 12月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
These drviers defined only variables but didn't declare as module parameters. Also fix the enable variable to bool type. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 12月, 2011 1 次提交
-
-
由 Sergiusz Urbaniak 提交于
Signed-off-by: NSergiusz Urbaniak <sergiusz.urbaniak@googlemail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 12月, 2011 2 次提交
-
-
由 Thomas Meyer 提交于
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Thomas Meyer 提交于
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 12月, 2011 3 次提交
-
-
由 David Dillow 提交于
Signed-off-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 David Dillow 提交于
There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: NKotCzarny <tjosko@yahoo.com> Signed-off-by: NDavid Dillow <dave@thedillows.org> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 12月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 Charles Chin 提交于
The verb command in stac92xx_post_suspend caused the audio to stop working after resuming from S3 mode on HP laptops with the VREF-pin mute-LED control. Removing relevant post_suspend registering. Although removing D3 on AFG is no optimal solution, the impact should be small in comparison with the broken S3/S4. Signed-off-by: NCharles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 11月, 2011 8 次提交
-
-
由 Marc Vertes 提交于
This quirk sould be reverted. It has the following probems: 1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the ID used matches a much broader range, potentially all boards containing a VIA chipset model in the family of vendor VIA 0x1106 and audio device ID 0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets. 2) VIA chipsets rely on azx_via_get_position() to handle correctly dma transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO leads to partially corrupted input buffers during capture. The effects of this bug are not immediately visible, it took strong DSP expertise, some expensive signal generator and a spectrum analyzer to identify it and verify correct behaviour using original default. 3) It's almost certain that the quirk did not fix the real problem, if there was one. Refer to original submission: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.htmlSigned-of-by: NMarc Vertes <mvertes@sigfox.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some HP laptops use a pin VREF for controlling the mute LED, and such a pin shouldn't be powered off. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lars-Peter Clausen 提交于
Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 Lars-Peter Clausen 提交于
The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
由 John F Leach 提交于
Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: NJohn F Leach <jfleach@jfleach.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Based on initial data. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 11月, 2011 5 次提交
-
-
由 Axel Lin 提交于
This patch converts the drivers in sound/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Cc: <stable@kernel.org> [v3.1] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 24 11月, 2011 2 次提交
-
-
由 Axel Lin 提交于
Factor out some boilerplate code. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
- 23 11月, 2011 5 次提交
-
-
由 Eric Miao 提交于
There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: NEric Miao <eric.miao@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Just checking the code in cs42l51_fill_cache(): The cache pointer points to codec->reg_cache + 1. I think it is because CS42L51_FIRSTREG is 0x01, so codec->reg_cache[0] is not used here. Then we read CS42L51_NUMREGS bytes to cache. So we need reg_cache_size to be CS42L51_NUMREGS + 1. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Paul Bolle 提交于
SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca968 ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: NDmitry Nezhevenko <dion@inhex.net> Cc: <stable@kernel.org> [v3.1] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-