- 13 5月, 2013 1 次提交
-
-
由 Maxime Ripard 提交于
Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 29 4月, 2013 1 次提交
-
-
由 Tomasz Figa 提交于
This patch adds basic device tree sources for Universal C210 board. Currently support includes: - eMMC - serial - max8952 and max8998 voltage regulators. - gpio-keys More support will be added in further patches. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 26 4月, 2013 1 次提交
-
-
由 Stefano Stabellini 提交于
xenvm is based on mach-vexpress, move it to mach-virt. Changes in v4: - update the dts Makefile too. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> CC: Marc Zyngier <marc.zyngier@arm.com> CC: will.deacon@arm.com CC: arnd@arndb.de CC: rob.herring@calxeda.com
-
- 12 4月, 2013 1 次提交
-
-
由 Rob Herring 提交于
Add the versatile platform dtbs to the dtbs make rule. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 11 4月, 2013 1 次提交
-
-
由 Simon Guinot 提交于
This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Acked-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 09 4月, 2013 12 次提交
-
-
由 Alexander Shiyan 提交于
The patch adds missing imx27-phytec-phycore dtb target into Makefile. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Fabio Estevam 提交于
Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
Add initial imx6dl-sabreauto support based on the common stuff already in imx6qdl-sabreauto.dtsi. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
Add initial imx6dl-sabresd support based on the common stuff already in imx6qdl-sabresd.dtsi. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Pavel Machek 提交于
Add support for MicroSys sbc6x board. Signed-off-by: NPavel Machek <pavel@denx.de> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Gwenhael Goavec-Merou 提交于
The APF27Dev is a docking board for an APF27 SOM Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Gwenhael Goavec-Merou 提交于
The APF51Dev is a docking board for an APF51 SOM Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Anil Kumar 提交于
DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Add the basic DT support for devkit8000. It includes: - twl4030 (PMIC) - MMC1 - I2C1 - leds Signed-off-by: NAnil Kumar <anilk4.v@gmail.com> Tested-by: NThomas Weber <thomas@tomweber.eu> Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>
-
由 Jon Hunter 提交于
Adds basic device-tree support for OMAP3430 SDP board which has 256MB of RAM, 128MB ONENAND flash, 256MB NAND flash and uses the TWL4030 power management IC. Signed-off-by: NJon Hunter <jon-hunter@ti.com> Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>
-
由 Javier Martinez Canillas 提交于
ISEE IGEP COM Module is an TI OMAP3 SoC computer on module. This patch adds an initial device tree support to boot an IGEP COM Module from the MMC/SD. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com> [b-cousson@ti.com: Update the Makefile for 3.8-rc2] Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>
-
由 Javier Martinez Canillas 提交于
ISEE IGEPv2 is an TI OMAP3 SoC based embedded board. This patch adds an initial device tree support to boot an IGEPv2 from the MMC/SD. Currently is working everything that is supported by DT on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio). Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com> [benoit.cousson@linaro.org: Update the Makefile for 3.8-rc2] Signed-off-by: NBenoit Cousson <benoit.cousson@linaro.org>
-
由 Kukjin Kim 提交于
This patch adds SD5v1.dts file for supporting SD5v1(Exynos5440) board. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 04 4月, 2013 1 次提交
-
-
由 Douglas Gilbert 提交于
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 03 4月, 2013 3 次提交
-
-
由 Magnus Damm 提交于
Lager base board support making use of 2 GiB of memory, the r8a7790 SoC with the SCIF0 serial port and CA15 with ARM architected timer. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Magnus Damm 提交于
V3 of APE6EVM base board support making use of 1 GiB of memory, the SCIFA0 serial port and ARM architected timer. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
Add basic Bock-W board support More devices will be added on top of this patch after PICNTRL and clock framework are in better shape. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 29 3月, 2013 1 次提交
-
-
由 Arnaud Ebalard 提交于
Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Tested-By: NArnaud Ebalard <arno@natisbad.org> Acked-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 26 3月, 2013 1 次提交
-
-
由 Ludovic Desroches 提交于
Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 21 3月, 2013 1 次提交
-
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com> [nicolas.ferre@atmel.com: remove unneeded address-cells and size-cells to gpio-keys] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 18 3月, 2013 2 次提交
-
-
由 Simon Horman 提交于
Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Simon Horman 提交于
Provide alternate board code for the marzen to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 07 3月, 2013 3 次提交
-
-
由 Girish K S 提交于
Arndale is a low cost board based on the Samsung Exynos5250 SoC. This patch adds initial device tree support for this board. Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com> Signed-off-by: NGirish K S <ks.giri@samsung.com> Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Dongjin Kim 提交于
Add initial DT for Hardkernel's ODROID-X board based on EXYNOS4412 SoC. This patch including adds the node to support fixed voltage for peripherals like LED, ethernet controller, and this patch adds GPIO connected LEDS on ODROID-X board and configure its properties like following: LED1: use 'heartbeat' trigger, blinking while the board is running. LED2: use 'mmc0' trigger, on when mmc0 is accessing. And adds the device node to support eMMC storage on SDCARD4 ports, controlled by MSHC. Signed-off-by: NDongjin Kim <tobetter@gmail.com> Acked-by: NOlof Johansson <olof@lixom.net> [kgene.kim@samsung.com: squashed into one commit as per Olof's comment] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
Add a minimal board dts file for EXYNOS4412 based Insignal Origen board. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 01 3月, 2013 3 次提交
-
-
由 Gregory CLEMENT 提交于
This is the new Armada XP evaluation board from Marvell. It comes with a RS232 port over USB, a SATA link, an internal SSD, 4 Ethernet Gigabit links. Support for USB (Host and device), SDIO, PCIe will be added as drivers when they become available for Armada XP in mainline. Tested-by: NSimon Guinot <simon.guinot@sequanux.org> Tested-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Willy Tarreau 提交于
Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
由 Florian Fainelli 提交于
This patch adds the DTS file to support the Marvell RD-A370-A1 (Reference Design board) also known as RD-88F6710 board. It is almost entirely similar to the DB-A370 board except that the first Ethernet PHY is SGMII-wired and the second is a switch which is RGMII-wired. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NJason Cooper <jason@lakedaemon.net>
-
- 12 2月, 2013 1 次提交
-
-
由 Dinh Nguyen 提交于
Signed-off-by: NDinh Nguyen <dinguyen@altera.com> Tested-by: NPavel Machek <pavel@denx.de> Reviewed-by: NPavel Machek <pavel@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 10 2月, 2013 5 次提交
-
-
由 Laurent Cans 提交于
Signed-off-by: NLaurent Cans <laurent.cans@gmail.com> Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Steffen Trumtrar 提交于
The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Fabio Estevam 提交于
Add basic device tree support for mx25pdk board. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Fabio Estevam 提交于
Add an entry for imx27-pdk.dtb, so that it can be generated by default. Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 29 1月, 2013 2 次提交
-
-
由 Linus Walleij 提交于
Support basic device tree boot on the Nomadik. Implement the support in the cpu file with the intent of deleting the board files later. At this stage IRQ controllers, system timer, l2x0 cache, UARTs and thus console boot is fully functional. Patch out the code adding devices by initcalls for now so as not to disturb the boot. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Lucas Stach 提交于
This adds the device tree for the Toradex Iris carrier board used together with a Colibri T20 512MB COM. The Iris has the following features, in brackets the current status: - DVI and VGA output through DVI-I connector (DVI-D enabled and tested) - LVDS output - 1 USB host port (enabled and tested) - 1 USB OTG port (enabled) - 100 MBit Ethernet (enabled and tested) - 5 UART ports (2 on 10way headers enabled and tested) - 1 MicroSD Slot (enabled and tested) - Audio connectors (enabled, only HP out and Line-in tested) - i2c RTC - GPIO connector (enabled, only sparsely tested) - external i2c bus - 4 PWM out - analog in Signed-off-by: NLucas Stach <dev@lynxeye.de> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-