Also move ZB_DEPTHCLEARVALUE to the list of safe regs.
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Not only is linear aligned supposedly more performant,
linear general is only supported by the CB in single
slice mode.  The texture hardware doesn't support
linear general, but I think the hw automatically
upgrades it to linear aligned.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Not only is linear aligned supposedly more performant,
linear general is only supported by the CB in single
slice mode.  The texture hardware doesn't support
linear general, but I think the hw automatically
upgrades it to linear aligned.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

My evergreen has been in a remote PC for week and reset has never once
saved me from certain doom, I finally relocated to the box with a
serial cable and noticed an oops when the GPU resets, and the TTM
delayed delete thread tries to remove something from the GTT.

This stops the delayed delete thread from executing across the GPU
reset handler, and woot I can GPU reset now.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Based on 6xx/7xx endian fixes from Cédric Cano.

v2: fix typo in shader
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

agd5f: minor cleanups
Signed-off-by: NCédric Cano <ccano@interfaceconcept.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

agd5f: additional cleanups/fixes
Signed-off-by: NCédric Cano <ccano@interfaceconcept.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

agd5f: minor cleanups
Signed-off-by: NCédric Cano <ccano@interfaceconcept.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The colorbuffer, zbuffer, and texture states are checked only once when
they get changed. This improves performance in the apps which emit
lots of draw packets and few state changes.

This drops performance in glxgears by a 1% or so, but glxgears is not
a benchmark we care about.
The time spent in the kernel when running Torcs dropped from 33% to 23%
and the frame rate is higher, which is a good thing.

r600 might need something like this as well.
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In the continuing effort to avoid kernel addresses leaking to unprivileged
users, this patch switches to %pK for /proc/dri/*/vma.
Signed-off-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

PPC Mac cards do not provide connector tables in
their vbios.  Their connector/encoder configurations
must be hardcoded in the driver.

verified by nyef on #radeon
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

drivers/gpu/drm/radeon/mkregtable.c:parser_auth() almost always remembers
to fclose(file) before returning, but it misses two spots.

This is not really important since the process will exit shortly after and
thus close the file for us, but being explicit prevents static analysis
tools from complaining about leaked memory and missing fclose() calls and
it also seems to be the prefered style of the existing code to explicitly
close the file.

So, here's a patch to add the two missing fclose() calls.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- set scaler table clears the interleave bit, need to
reset it in encoder quirks, this was already done for
pre-dce4.
- remove the interleave settings from set_base() functions
this is now handled in the encoder quirks functions, and
isn't technically part of the display base setup.
- rename evergreen_do_set_base() to dce4_do_set_base() since
it's used on both evergreen and NI asics.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=28182Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The old code dereferenced a value, the new code just needs to pass
the ptr.

fixes an oops looking at files in debugfs.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  devicetree-discuss is moderated for non-subscribers
  MAINTAINERS: Add entry for GPIO subsystem
  dt: add documentation of ARM dt boot interface
  dt: Remove obsolete description of powerpc boot interface
  dt: Move device tree documentation out of powerpc directory
  spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662
  ALSA: hrtimer: remove superfluous tasklet invocation
  ALSA: hrtimer: handle delayed timer interrupts
  ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G
  ALSA: hda - Don't handle empty patch files
  ALSA: hda - Fix missing CA initialization for HDMI/DP
  ALSA: usbaudio - Enable the E-MU 0204 USB
  ALSA: hda - switch lfe with side in mixer for 4930g
  ASoC: Improve WM8994 digital power sequencing
  ASoC: Create an AIF1ADCDAT signal widget to match AIF2
  asoc: davinci: da830/omap-l137: correct cpu_dai_name
  ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()

This reverts commit 47970b1b.

It turns out it breaks several distributions.  Looks like the stricter
selinux checks fail due to selinux policies not being set to allow the
access - breaking X, but also lspci.

So while the change was clearly the RightThing(tm) to do in theory, in
practice we have backwards compatibility issues making it not work.
Reported-by: NDave Young <hidave.darkstar@gmail.com>
Acked-by: NDavid Airlie <airlied@linux.ie>
Acked-by: NAlex Riesen <raa.lkml@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

I'll probably regret this....
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: call __jbd2_log_start_commit with j_state_lock write locked
  ext4: serialize unaligned asynchronous DIO
  ext4: make grpinfo slab cache names static
  ext4: Fix data corruption with multi-block writepages support
  ext4: fix up ext4 error handling
  ext4: unregister features interface on module unload
  ext4: fix panic on module unload when stopping lazyinit thread

On an SMP ARM system running ext4, I've received a report that the
first J_ASSERT in jbd2_journal_commit_transaction has been triggering:

	J_ASSERT(journal->j_running_transaction != NULL);

While investigating possible causes for this problem, I noticed that
__jbd2_log_start_commit() is getting called with j_state_lock only
read-locked, in spite of the fact that it's possible for it might
j_commit_request.  Fix this by grabbing the necessary information so
we can test to see if we need to start a new transaction before
dropping the read lock, and then calling jbd2_log_start_commit() which
will grab the write lock.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4 has a data corruption case when doing non-block-aligned
asynchronous direct IO into a sparse file, as demonstrated
by xfstest 240.

The root cause is that while ext4 preallocates space in the
hole, mappings of that space still look "new" and 
dio_zero_block() will zero out the unwritten portions.  When
more than one AIO thread is going, they both find this "new"
block and race to zero out their portion; this is uncoordinated
and causes data corruption.

Dave Chinner fixed this for xfs by simply serializing all
unaligned asynchronous direct IO.  I've done the same here.
The difference is that we only wait on conversions, not all IO.
This is a very big hammer, and I'm not very pleased with
stuffing this into ext4_file_write().  But since ext4 is
DIO_LOCKING, we need to serialize it at this high level.

I tried to move this into ext4_ext_direct_IO, but by then
we have the i_mutex already, and we will wait on the
work queue to do conversions - which must also take the
i_mutex.  So that won't work.

This was originally exposed by qemu-kvm installing to
a raw disk image with a normal sector-63 alignment.  I've
tested a backport of this patch with qemu, and it does
avoid the corruption.  It is also quite a lot slower
(14 min for package installs, vs. 8 min for well-aligned)
but I'll take slow correctness over fast corruption any day.

Mingming suggested that we can track outstanding
conversions, and wait on those so that non-sparse
files won't be affected, and I've implemented that here;
unaligned AIO to nonsparse files won't take a perf hit.

[tytso@mit.edu: Keep the mutex as a hashed array instead
 of bloating the ext4 inode]

[tytso@mit.edu: Fix up namespace issues so that global
 variables are protected with an "ext4_" prefix.]
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In 2.6.37 I was running into oopses with repeated module
loads & unloads.  I tracked this down to:

fb1813f4 ext4: use dedicated slab caches for group_info structures

(this was in addition to the features advert unload problem)

The kstrdup & subsequent kfree of the cache name was causing
a double free.  In slub, at least, if I read it right it allocates
& frees the name itself, slab seems to do something different...
so in slub I think we were leaking -our- cachep->name, and double
freeing the one allocated by slub.

After getting lost in slab/slub/slob a bit, I just looked at other
sized-caches that get allocated.  jbd2, biovec, sgpool all do it
more or less the way jbd2 does.  Below patch follows the jbd2
method of dynamically allocating a cache at mount time from
a list of static names.

(This might also possibly fix a race creating the caches with
parallel mounts running).

[Folded in a fix from Dan Carpenter which fixed an off-by-one error in
the original patch]

Cc: stable@kernel.org
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

I'll probably regret this....
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix DIMMs per DCTs output

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use single thread workqueues

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: don't always drop malformed replies on the floor (try #3)
  cifs: clean up checks in cifs_echo_request
  [CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (emc1403) Fix I2C address range
  hwmon: (lm63) Consider LM64 temperature offset

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  pci: use security_capable() when checking capablities during config space read
  security: add cred argument to security_capable()
  tpm_tis: Use timeouts returned from TPM

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h
  ARM: S5PV310: Cleanup System MMU
  ARM: S5PV310: Add support System MMU on SMDKV310

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix msr instruction detection
  microblaze: Fix pte_update function
  microblaze: Fix asm compilation warning
  microblaze: Fix IRQ flag handling for MSR=0

This code makes two calls to clk_get, then test both return values and
fails if either failed.

The problem is that in the first inner if, where the first call to
clk_get has failed, it don't know if the second call has failed as well.
So it don't know whether clk_get should be called on the result of the
second call.  Of course, it would be possible to test that value again.
A simpler solution is just to test the result of calling clk_get
directly after each call.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
position p1,p2;
expression e;
statement S;
@@

e = clk_get@p1(...)
...
if@p2 (IS_ERR(e)) S

@@
expression e;
statement S;
identifier l;
position r.p1, p2 != r.p2;
@@

*e = clk_get@p1(...)
... when != clk_put(e)
*if@p2 (...)
{
  ... when != clk_put(e)
* return ...;
}// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NAmit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_uncharge_page() should be called in all failure cases after
mem_cgroup_charge_newpage() is called in huge_memory.c::collapse_huge_page()

 [ 4209.076861] BUG: Bad page state in process khugepaged  pfn:1e9800
 [ 4209.077601] page:ffffea0006b14000 count:0 mapcount:0 mapping:          (null) index:0x2800
 [ 4209.078674] page flags: 0x40000000004000(head)
 [ 4209.079294] pc:ffff880214a30000 pc->flags:2146246697418756 pc->mem_cgroup:ffffc9000177a000
 [ 4209.082177] (/A)
 [ 4209.082500] Pid: 31, comm: khugepaged Not tainted 2.6.38-rc3-mm1 #1
 [ 4209.083412] Call Trace:
 [ 4209.083678]  [<ffffffff810f4454>] ? bad_page+0xe4/0x140
 [ 4209.084240]  [<ffffffff810f53e6>] ? free_pages_prepare+0xd6/0x120
 [ 4209.084837]  [<ffffffff8155621d>] ? rwsem_down_failed_common+0xbd/0x150
 [ 4209.085509]  [<ffffffff810f5462>] ? __free_pages_ok+0x32/0xe0
 [ 4209.086110]  [<ffffffff810f552b>] ? free_compound_page+0x1b/0x20
 [ 4209.086699]  [<ffffffff810fad6c>] ? __put_compound_page+0x1c/0x30
 [ 4209.087333]  [<ffffffff810fae1d>] ? put_compound_page+0x4d/0x200
 [ 4209.087935]  [<ffffffff810fb015>] ? put_page+0x45/0x50
 [ 4209.097361]  [<ffffffff8113f779>] ? khugepaged+0x9e9/0x1430
 [ 4209.098364]  [<ffffffff8107c870>] ? autoremove_wake_function+0x0/0x40
 [ 4209.099121]  [<ffffffff8113ed90>] ? khugepaged+0x0/0x1430
 [ 4209.099780]  [<ffffffff8107c236>] ? kthread+0x96/0xa0
 [ 4209.100452]  [<ffffffff8100dda4>] ? kernel_thread_helper+0x4/0x10
 [ 4209.101214]  [<ffffffff8107c1a0>] ? kthread+0x0/0xa0
 [ 4209.101842]  [<ffffffff8100dda0>] ? kernel_thread_helper+0x0/0x10
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3e7d3449 ("mm: vmscan: reclaim order-0 and use compaction
instead of lumpy reclaim") introduced an indefinite loop in
shrink_zone().

It meant to break out of this loop when no pages had been reclaimed and
not a single page was even scanned.  The way it would detect the latter
is by taking a snapshot of sc->nr_scanned at the beginning of the
function and comparing it against the new sc->nr_scanned after the scan
loop.  But it would re-iterate without updating that snapshot, looping
forever if sc->nr_scanned changed at least once since shrink_zone() was
invoked.

This is not the sole condition that would exit that loop, but it
requires other processes to change the zone state, as the reclaimer that
is stuck obviously can not anymore.

This is only happening for higher-order allocations, where reclaim is
run back to back with compaction.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NMichal Hocko <mhocko@suse.cz>
Tested-by: Kent Overstreet<kent.overstreet@gmail.com>
Reported-by: NKent Overstreet <kent.overstreet@gmail.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the page is going to be written to, __do_page needs to break COW.

However, the old page (before breaking COW) was never mapped mapped into
the current pte (__do_fault is only called when the pte is not present),
so vmscan can't have marked the old page as PageMlocked due to being
mapped in __do_fault's VMA.  Therefore, __do_fault() does not need to
worry about clearing PageMlocked() on the old page.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmscan can lazily find pages that are mapped within VM_LOCKED vmas, and
set the PageMlocked bit on these pages, transfering them onto the
unevictable list.  When do_wp_page() breaks COW within a VM_LOCKED vma,
it may need to clear PageMlocked on the old page and set it on the new
page instead.

This change fixes an issue where do_wp_page() was clearing PageMlocked
on the old page while the pte was still pointing to it (as well as
rmap).  Therefore, we were not protected against vmscan immediately
transfering the old page back onto the unevictable list.  This could
cause pages to get stranded there forever.

I propose to move the corresponding code to the end of do_wp_page(),
after the pte (and rmap) have been pointed to the new page.
Additionally, we can use munlock_vma_page() instead of
clear_page_mlock(), so that the old page stays mlocked if there are
still other VM_LOCKED vmas mapping it.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:

	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
		printk(KERN_ERR
			"Cannot allocate aperture memory hole (%lx,%uK)\n",
				addr, aper_size>>10);
		return 0;
	}
	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

fails because memblock core code align the size with 512M.  That could
make size way too big.

So don't align the size in that case.

actually __memblock_alloc_base, the another caller already align that
before calling that function.

BTW. x86 does not use __memblock_alloc_base...
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>