Improves the parsing of the memory timing table on NV50-NV98revA1 chipsets.

Added stepping to drm_nouveau_private to make sure newer NV98 (105M) is
zero rather than incorrect.
Signed-off-by: NRoy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This patch fixes messages such as
ERROR: space required after that ','
ERROR: spaces required around that '='
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Fix 'ERROR: that open brace { should be on the previous line'
Fix 'ERROR: else should follow close brace }'
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Fix 'ERROR: trailing whitespace',
Fix 'ERROR: do not use C99 // comments'
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Fix 'ERROR: code indent should use tabs where possible'
Fix 'ERROR: space required before the open parenthesis ('
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>

Signed-off-by: NMartin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

The virtual i2c to real i2c channel mappings weren't setting
the right id in some cases.

Spotted by: Andrew Randrianasulu
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The MXMX method appears to be a mutex of some sort.
Signed-off-by: NDave Airlie <airlied@redhat.com>

optimus has another DSM GUID, so we check for its existance,
also allow the BIOS stuff is we find it.
Signed-off-by: NDave Airlie <airlied@redhat.com>

this hooks up nouveau to the MXM mux switching method.

With this in place I can switch the LVDS MUX on my T410s,
I expect we need a bit more work for other laptops.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix the vbios mapping and only add the actual
buses that the cards have.  The existing code was
mostly correct.  Just clean up a few cases on r2xx/r3xx
and document that buses the hw actually has.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The most common use of the radeon i2c buses is for ddc.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The previous commit to move the parsing into the core drm created a
new situation and a soft dependency on the CONFIG_FB. We really don't
want to make this a hard dependency so just wrap the one place that
actually needs an fb symbol.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In the absence of configuration data for providing the fixed mode for
a panel, I would like to be able to pass such modes along a separate
module paramenter. To do so, I then need to parse a modeline from a
string, which drm is already capable of. Export that capability to the
drivers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add __attribute__((format (printf, 4, 5))) to drm_ut_debug_printk
and fix fallout.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reduce drm text size ~1% by using drm_err and
printf extension %pV to emit error messages.

Remove unused macro DRM_MEM_ERROR.

$ size drivers/gpu/drm/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 361159	   9663	    256	 371078	  5a986	drivers/gpu/drm/built-in.o.new
 365416	   9663	    256	 375335	  5ba27	drivers/gpu/drm/built-in.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to hold the dev->mode_config.mutex whilst detecting the output
status. But we also need to drop it for the call into
drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when
attaching the fbcon.

Failure to do so exposes a race with normal output probing. Detected by
adding some warnings that the mutex is held to the backend detect routines:

[   17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]()
[   17.772458] Hardware name: Latitude E6400
[   17.772460] Modules linked in: ....
[   17.772582] Pid: 11, comm: kworker/0:1 Tainted: G        W 2.6.38.4-custom.2 #8
[   17.772584] Call Trace:
[   17.772591]  [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c
[   17.772603]  [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915]
[   17.772612]  [<ffffffffa0355d49>] ?  drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper]
[   17.772619]  [<ffffffffa03534d5>] ?  drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper]
[   17.772625]  [<ffffffffa0354760>] ?  drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper]
[   17.772633]  [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper]
[   17.772638]  [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345
[   17.772644]  [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper]
[   17.772648]  [<ffffffff8105b540>] ? process_one_work+0x193/0x28e
[   17.772652]  [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172
[   17.772655]  [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[   17.772658]  [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[   17.772663]  [<ffffffff8105f767>] ? kthread+0x7a/0x82
[   17.772668]  [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10
[   17.772671]  [<ffffffff8105f6ed>] ? kthread+0x0/0x82
[   17.772674]  [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10
Reported-by: NFrederik Himpe <fhimpe@telenet.be>
References: https://bugs.freedesktop.org/show_bug.cgi?id=36394Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID 1.4 digital displays report the color spaces they support in the
features block.  Add support for grabbing this data and stuffing it into
the display_info struct for driver use.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID 1.4 digital monitors report the bit depth supported in the input
field.  Add support for parsing this out and storing the info in the
display_info structure for use by drivers.

[airlied: tweaked to fix inter-patch dependency]
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

i915 calls the panic handler function on last close to reset the modes,
however this is a really bad idea for multi-gpu machines, esp shareable
gpus machines. So add a new entry point for the driver to just restore
its own fbcon mode.

v2: move code into fb helper, fix panic code to block mode change on
powered off GPUs.

[airlied: this hits drm core and I wrote it and it was reviewed on intel-gfx
 so really I signed it off twice ;-).]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

needed by mesa for htile setup.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

needed for HiS in mesa.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Multi-gpu/switcheroo relies on this option to get the console on the
correct GPU at bootup, some distros enable it but it seems some get
it wrong.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

agd5f: fix commit message.
Signed-off-by: NCedric Cano <ccano@interfaceconcept.com>
Reviewed-by: NMichel Dänzer <michel@daenzer.net>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Prefer min m to max p only on pre-r7xx asics.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=36197Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 73412c38 ("drm/nouveau: allocate
kernel's notifier object at end of block") intended to align end of
notifier block to page boundary, but start of block was miscalculated
to be off by -16 bytes. Fix it.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_bo_wr32 expects offset to be in words, but we pass value in bytes,
so after commit 73412c38 ("drm/nouveau: allocate
kernel's notifier object at end of block") we started to overwrite some memory
after notifier buffer object (previously m2mf_ntfy was always 0, so it didn't
matter it was a value in bytes).
Reported-by: NDominik Brodowski <linux@dominikbrodowski.net>
Reported-by: NNigel Cunningham <lkml@nigelcunningham.com.au>
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Pekka Paalanen <pq@iki.fi>
Cc: stable@kernel.org    [2.6.38]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Problem introduced with commit 6ba9a683Reported-by: NBob Gleitsmann <rjgleits@bellsouth.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Caught with kmemcheck on unrelated business.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Wasn't aware they even existed, apparently they do!  They're actually
AGP chips with a bridge as far as I can tell, which puts them in the
same boat as nv40/nv45.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes a possible lock ordering reversal between context_switch_lock
and ramin_lock.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>

This patch fixes two issues:
- A disabled crtc does not use any lb, so return 0 for
lb size.  This makes the display priority calculation
more exact.
- Only use 1/2 and whole lb partitions. Using smaller
partitions can cause underflow to one of the displays
if you have multiple large displays on the same lb.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=34534Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Sometimes the i2c test in i2c_bit_add_bus fails
if this happens we fail to register the i2c adapter and
eventually fail to add the connector.  If i2c fails,
add the connector to the user can at least force
it on.

Note that some distros set i2c-algo-bit.bit_test to 1 by
default which sometimes fails preventing the ddc i2c adapter
from being added.  The i2c adapter works even if the bit test
fails, probably due to pre/post_xfer not getting called in
the test_bit function.  I have another patch to follow
up on that.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=36221Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Noticed by Patrick Lowry.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>