- 17 3月, 2017 17 次提交
-
-
由 Gregory CLEMENT 提交于
Armada 37xx SoC embedded an EHCI controller. This patch adds the device tree node enabling its support. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gregory CLEMENT 提交于
The mvebu ARM64 SoCs no longer select PLAT_ORION. However Armada 37xx use the Orion EHCI controller. This patch allows the Orion EHCI driver to be built when ARCH_MVEBU is selected. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hua Jing 提交于
- Add a new compatible string for the Armada 3700 SoCs - add sbuscfg support for orion usb controller driver. For the SoCs without hlock, need to program BAWR/BARD/AHBBRST fields in the sbuscfg register to guarantee the AHB master's burst would not overrun or underrun the FIFO. - the sbuscfg register has to be set after the usb controller reset, otherwise the value would be overridden to 0. In order to do this, the reset callback is registered. [gregory.clement@free-electrons.com: - reword commit and comments - fix error path in ehci_orion_drv_reset() - fix checkpatch warning] Signed-off-by: NHua Jing <jinghua@marvell.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NRob Herring <robh@kernel.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Elena Reshetova 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Elena Reshetova 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Elena Reshetova 提交于
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid Windsor <dwindsor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
After commit d705ff38 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff38 but omitted. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Fixes: d705ff38 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pierre-Yves Kerbrat 提交于
Remove the useless variable 'partial' storing the actual length transferred. Nothing was done with it, so simply get rid of it as usb_stor_bulk_transfer_buf can handle having NULL instead. This also fixes the following sparse issues (-Wtypesign): drivers/usb/storage/karma.c:122:51: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/karma.c:122:51: expected unsigned int *act_len drivers/usb/storage/karma.c:122:51: got int *<noident> drivers/usb/storage/karma.c:127:52: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/karma.c:127:52: expected unsigned int *act_len drivers/usb/storage/karma.c:127:52: got int *<noident> Signed-off-by: NPierre-Yves Kerbrat <pkerbrat@free.fr> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Milian Reichardt 提交于
Changed the location of '*' to fit the current coding style and easy readability. Signed-of-by: NMilian Reichardt <mreichardt95@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Milian Reichardt 提交于
Added a Space after ',' to get rid of an error message in checkpatch.pl and improve readability Signed-of-by: NMilian Reichardt <mreichardt95@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Milian Reichardt 提交于
Fixed ERROR: Use 4 digit octal (0777) not decimal permissions to fulfill the current coding-style. Signed-of-by: NMilian Reichardt <mreichardt95@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gustavo A. R. Silva 提交于
'val' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 1230257 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yoshihiro Shimoda 提交于
This patch fixes an issue that a usb 1.1 device is not connected in system resume and then the following message appeared if debug messages are enabled: usb 2-1: Waited 2000ms for CONNECT To resolve this issue, the EHCI controller must be resumed after its companion controllers. So, this patch adds such code on the driver. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yoshihiro Shimoda 提交于
EHCI controllers will have a companion controller. However, on platform bus, there was difficult to bind them in previous code. So, this patch adds helper functions to bind them using a "companion" property. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jonathan Dieter 提交于
GCC 7 now warns when switch statements fall through implicitly, and with -Werror enabled in configure.ac, that makes these tools unbuildable. We fix this by notifying the compiler that this particular case statement is meant to fall through. Reviewed-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NJonathan Dieter <jdieter@lesbg.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jonathan Dieter 提交于
The usbip userspace tools call sprintf()/snprintf() and don't check for the return value which can lead the paths to overflow, truncating the final file in the path. More urgently, GCC 7 now warns that these aren't checked with -Wformat-overflow, and with -Werror enabled in configure.ac, that makes these tools unbuildable. This patch fixes these problems by replacing sprintf() with snprintf() in one place and adding checks for the return value of snprintf(). Reviewed-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NJonathan Dieter <jdieter@lesbg.com> Acked-by: NShuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 yuan linyu 提交于
a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: Nyuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 3月, 2017 8 次提交
-
-
由 Romain Perier 提交于
The PCI pool API is deprecated. This commit replaces the PCI pool old API by the appropriate function with the DMA pool API. Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NPeter Senna Tschudin <peter.senna@collabora.com> Tested-by: NPeter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Romain Perier 提交于
The PCI pool API is deprecated. This commit replaces the PCI pool old API by the appropriate function with the DMA pool API. Signed-off-by: NRomain Perier <romain.perier@collabora.com> Reviewed-by: NPeter Senna Tschudin <peter.senna@collabora.com> Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Romain Perier 提交于
The PCI pool API is deprecated. This commit replaces the PCI pool old API by the appropriate function with the DMA pool API. Signed-off-by: NRomain Perier <romain.perier@collabora.com> Acked-by: NPeter Senna Tschudin <peter.senna@collabora.com> Tested-by: NPeter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Romain Perier 提交于
This replaces remaining occurences of pci_pool by dma_pool, as this is the new API that could be used for that purpose. Signed-off-by: NRomain Perier <romain.perier@collabora.com> Reviewed-by: NPeter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oliver Neukum 提交于
There is a small window during which the an URB may remain active after disconnect has returned. If in that case already freed memory may be accessed and executed. The fix is to poison the URB befotre the work is flushed. Signed-off-by: NOliver Neukum <oneukum@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Prarit Bhargava 提交于
Add .gitignore file for untracked files in tools/usb. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gustavo A. R. Silva 提交于
'val' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 1230256 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gustavo A. R. Silva 提交于
'index' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 115396 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 3月, 2017 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: - four patches to get the new cputime code in shape for s390 - add the new statx system call - a few bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up statx system call KVM: s390: Fix guest migration for huge guests resulting in panic s390/ipl: always use load normal for CCW-type re-IPL s390/timex: micro optimization for tod_to_ns s390/cputime: provide archicture specific cputime_to_nsecs s390/cputime: reset all accounting fields on fork s390/cputime: remove last traces of cputime_t s390: fix in-kernel program checks s390/crypt: fix missing unlock in ctr_paes_crypt on error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - a fix for the kexec/purgatory regression which was introduced in the merge window via an innocent sparse fix. We could have reverted that commit, but on deeper inspection it turned out that the whole machinery is neither documented nor robust. So a proper cleanup was done instead - the fix for the TLB flush issue which was discovered recently - a simple typo fix for a reboot quirk * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix tlb flushing when lguest clears PGE kexec, x86/purgatory: Unbreak it and clean it up x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: - a workaround for a GIC erratum - a missing stub function for CONFIG_IRQDOMAIN=n - fixes for a couple of type inconsistencies * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Fix incorrect type of register size irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065 irqdomain: Add empty irq_domain_check_msi_remap irqchip/crossbar: Fix incorrect type of local variables
-
- 12 3月, 2017 5 次提交
-
-
由 Daniel Borkmann 提交于
Fengguang reported random corruptions from various locations on x86-32 after commits d2852a22 ("arch: add ARCH_HAS_SET_MEMORY config") and 9d876e79 ("bpf: fix unlocking of jited image when module ronx not set") that uses the former. While x86-32 doesn't have a JIT like x86_64, the bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module support built in and therefore never had the DEBUG_SET_MODULE_RONX setting enabled. After investigating the crashes further, it turned out that using set_memory_ro() and set_memory_rw() didn't have the desired effect, for example, setting the pages as read-only on x86-32 would still let probe_kernel_write() succeed without error. This behavior would manifest itself in situations where the vmalloc'ed buffer was accessed prior to set_memory_*() such as in case of bpf_prog_alloc(). In cases where it wasn't, the page attribute changes seemed to have taken effect, leading to the conclusion that a TLB invalidate didn't happen. Moreover, it turned out that this issue reproduced with qemu in "-cpu kvm64" mode, but not for "-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(), though. There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush (depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually worked fine, and further investigating the cr4 one turned out that X86_CR4_PGE bit was not set in cr4 register, meaning the __native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same value instead of clearing X86_CR4_PGE in the first write to trigger the flush. It turned out that X86_CR4_PGE was cleared from cr4 during init from lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also cleared from there due to concerns of using PGE in guest kernel that can lead to hard to trace bugs (see bff672e6 ("lguest: documentation V: Host") in init()). The CPU feature bits are cleared in dynamic boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB flushing to use, meaning they still used the old setting of the host kernel. Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate to static_cpu_has() checks is too late at this point as sections have been patched already, so for now, it seems reasonable to switch back to boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf95 ("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via cr3 as originally intended, properly makes the new page attributes visible and thus fixes the crashes seen by Fengguang. Fixes: c109bf95 ("x86/cpufeature: Remove cpu_has_pge") Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: bp@suse.de Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: lkp@01.org Cc: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM updates from Marc Zyngier: - vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 - I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices - General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems x86: - improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU reset * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: do not warn when MSR bitmap address is not backed KVM: arm64: Increase number of user memslots to 512 KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64 KVM: Add documentation for KVM_CAP_NR_MEMSLOTS KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled arm64: KVM: Survive unknown traps from guests arm: KVM: Survive unknown traps from guests KVM: arm/arm64: Let vcpu thread modify its own active state KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset kvm: nVMX: VMCLEAR should not cause the vCPU to shut down KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux由 Linus Torvalds 提交于
Pull extable.h fix from Paul Gortmaker: "Fixup for arch/score after extable.h introduction. It seems that Guenter is the only one on the planet doing builds for arch/score -- we don't have compile coverage for it in linux-next or in the kbuild-bot either. Guenter couldn't even recall where he got his toolchain, but was kind enough to share it with me so I could validate this change and also add arch/score to my build coverage. I sat on this a bit in case there was any other fallout in other arch dirs, but since this still seems to be the only one, I might as well send it on its way" * tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: score: Fix implicit includes now failing build after extable change
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull random updates from Ted Ts'o: "Change get_random_{int,log} to use the CRNG used by /dev/urandom and getrandom(2). It's faster and arguably more secure than cut-down MD5 that we had been using. Also do some code cleanup" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block random: convert get_random_int/long into get_random_u32/u64 random: use chacha20 for get_random_int/long random: fix comment for unused random_min_urandom_seed random: remove variable limit random: remove stale urandom_init_wait random: remove stale maybe_reseed_primary_crng
-
由 Guenter Roeck 提交于
After changing from module.h to extable.h, score builds fail with: arch/score/kernel/traps.c: In function 'do_ri': arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step' arch/score/mm/extable.c: In function 'fixup_exception': arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type because extable.h doesn't drag in the same amount of headers as the module.h did. Add in the headers which were implicitly expected. Fixes: 90858794 ("module.h: remove extable.h include now users have migrated") Signed-off-by: NGuenter Roeck <linux@roeck-us.net> [PG: tweak commit log; refresh for sched header refactoring.] Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 11 3月, 2017 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes frpm Greg KH: "Here are two bugfixes for tty stuff for 4.11-rc2. One of them resolves the pretty bad bug in the n_hdlc code that Alexander Popov found and fixed and has been reported everywhere. The other just fixes a samsung serial driver issue when DMA fails on some systems. Both have been in linux-next with no reported issues" * tag 'tty-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: samsung: Continue to work if DMA request fails tty: n_hdlc: get rid of racy n_hdlc.tbuf
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are two small build warning fixes for some staging drivers that Arnd has found on his valiant quest to get the kernel to build properly with no warnings. Both of these have been in linux-next this week and resolve the reported issues" * tag 'staging-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: octeon: remove unused variable staging/vc04_services: add CONFIG_OF dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here is a number of different USB fixes for 4.11-rc2. Seems like there were a lot of unresolved issues that people have been finding for this subsystem, and a bunch of good security auditing happening as well from Johan Hovold. There's the usual batch of gadget driver fixes and xhci issues resolved as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers usb: host: xhci-dbg: HCIVERSION should be a binary number usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct usb: xhci-mtk: check hcc_params after adding primary hcd USB: serial: digi_acceleport: fix OOB-event processing MAINTAINERS: usb251xb: remove reference inexistent file doc: dt-bindings: usb251xb: mark reg as required usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time usb: usb251xb: remove max_{power,current}_{sp,bp} properties usb-storage: Add ignore-residue quirk for Initio INIC-3619 USB: iowarrior: fix NULL-deref in write USB: iowarrior: fix NULL-deref at probe usb: phy: isp1301: Add OF device ID table usb: ohci-at91: Do not drop unhandled USB suspend control requests USB: serial: safe_serial: fix information leak in completion handler USB: serial: io_ti: fix information leak in completion handler USB: serial: omninet: drop open callback USB: serial: omninet: fix reference leaks at open USB: serial: io_ti: fix NULL-deref in interrupt callback usb: dwc3: gadget: make to increment req->remaining in all cases ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pinctrl fixes from Linus Walleij: "Two smaller pin control fixes for the v4.11 series: - Add a get_direction() function to the qcom driver - Fix two pin names in the uniphier driver" * tag 'pinctrl-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: uniphier: change pin names of aio/xirq for LD11 pinctrl: qcom: add get_direction function
-
由 Thomas Gleixner 提交于
The purgatory code defines global variables which are referenced via a symbol lookup in the kexec code (core and arch). A recent commit addressing sparse warnings made these static and thereby broke kexec_file. Why did this happen? Simply because the whole machinery is undocumented and lacks any form of forward declarations. The variable names are unspecific and lack a prefix, so adding forward declarations creates shadow variables in the core code. Aside of that the code relies on magic constants and duplicate struct definitions with no way to ensure that these things stay in sync. The section placement of the purgatory variables happened by chance and not by design. Unbreak kexec and cleanup the mess: - Add proper forward declarations and document the usage - Use common struct definition - Use the proper common defines instead of magic constants - Add a purgatory_ prefix to have a proper name space - Use ARRAY_SIZE() instead of a homebrewn reimplementation - Add proper sections to the purgatory variables [ From Mike ] Fixes: 72042a8c ("x86/purgatory: Make functions and variables static") Reported-by: NMike Galbraith <<efault@gmx.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Tobin C. Harding" <me@tobin.cc> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Ilya Dryomov: - a fix for the recently discovered misdirected requests bug present in jewel and later on the server side and all stable kernels - a fixup for -rc1 CRUSH changes - two usability enhancements: osd_request_timeout option and supported_features bus attribute. * tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client: libceph: osd_request_timeout option rbd: supported_features bus attribute libceph: don't set weight to IN when OSD is destroyed libceph: fix crush_decode() for older maps
-