- 09 9月, 2012 1 次提交
-
-
由 Ren, Yongjie 提交于
Checks and operations on the INVPCID feature bit should use EBX of CPUID leaf 7 instead of ECX. Signed-off-by: NJunjie Mao <junjie.mao@intel.com> Signed-off-by: NYongjie Ren <yongjien.ren@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 04 9月, 2012 1 次提交
-
-
由 Jamie Iles 提交于
Commit aea218f3 (KVM: PIC: call ack notifiers for irqs that are dropped form irr) used an uninitialised variable to track whether an appropriate apic had been found. This could result in calling the ack notifier incorrectly. Cc: Gleb Natapov <gleb@redhat.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 03 9月, 2012 2 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French. * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix cifs_do_create error hadnling cifs: print error code if smb signature verification fails CIFS: Fix log messages in packet checking for SMB2 CIFS: Protect i_nlink from being negative
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) NLA_PUT* --> nla_put_* conversion got one case wrong in nfnetlink_log, fix from Patrick McHardy. 2) Missed error return check in ipw2100 driver, from Julia Lawall. 3) PMTU updates in ipv4 were setting the expiry time incorrectly, fix from Eric Dumazet. 4) SFC driver erroneously reversed src and dst when reporting filters via ethtool. 5) Memory leak in CAN protocol and wrong setting of IRQF_SHARED in sja1000 can platform driver, from Alexey Khoroshilov and Sven Schmitt. 6) Fix multicast traffic scaling regression in ipv4_dst_destroy, only take the lock when we really need to. From Eric Dumazet. 7) Fix non-root process spoofing in netlink, from Pablo Neira Ayuso. 8) CWND reduction in TCP is done incorrectly during non-SACK recovery, fix from Yuchung Cheng. 9) Revert netpoll change, and fix what was actually a driver specific problem. From Amerigo Wang. This should cure bootup hangs with netconsole some people reported. 10) Fix xen-netfront invoking __skb_fill_page_desc() with a NULL page pointer. From Ian Campbell. 11) SIP NAT fix for expectiontation creation, from Pablo Neira Ayuso. 12) __ip_rt_update_pmtu() needs RCU locking, from Eric Dumazet. 13) Fix usbnet deadlock on resume, can't use GFP_KERNEL in this situation. From Oliver Neukum. 14) The davinci ethernet driver triggers an OOPS on removal because it frees an MDIO object before unregistering it. Fix from Bin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) net: qmi_wwan: add several new Gobi devices fddi: 64 bit bug in smt_add_para() net: ethernet: fix kernel OOPS when remove davinci_mdio module net/xfrm/xfrm_state.c: fix error return code net: ipv6: fix error return code net: qmi_wwan: new device: Foxconn/Novatel E396 usbnet: fix deadlock in resume cs89x0 : packet reception not working netfilter: nf_conntrack: fix racy timer handling with reliable events bnx2x: Correct the ndo_poll_controller call bnx2x: Move netif_napi_add to the open call ipv4: must use rcu protection while calling fib_lookup bnx2x: fix 57840_MF pci id net: ipv4: ipmr_expire_timer causes crash when removing net namespace e1000e: DoS while TSO enabled caused by link partner with small MSS l2tp: avoid to use synchronize_rcu in tunnel free function gianfar: fix default tx vlan offload feature flag netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation xen-netfront: use __pskb_pull_tail to ensure linear area is big enough on RX netfilter: nfnetlink_log: fix error return code in init path ...
-
- 02 9月, 2012 4 次提交
-
-
由 Bjørn Mork 提交于
Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Dan Carpenter 提交于
The intent was to set 4 bytes of data so that's why the sp_len is set to 4 on the next line. The cast to u_long pointer clears 8 bytes on 64 bit arches. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Linus Torvalds 提交于
-
由 John Stultz 提交于
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: NAndreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 9月, 2012 10 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6由 Linus Torvalds 提交于
Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
-
由 Bin Liu 提交于
davinci mdio device is not unregistered from mdiobus when removing the module, which causes BUG_ON() when free the device from mdiobus. Calling mdiobus_unregister() before mdiobus_free() fixes the issue. Signed-off-by: NBin Liu <b-liu@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. The initial initialization of the return variable is also dropped, because that value is never used. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams <dcbw@redhat.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Ben Chan <benchan@google.com> Signed-off-by: NAleksander Morgado <aleksander@lanedo.com> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5 That is 3.5 Signed-off-by: NOliver Neukum <oneukum@suse.de> CC: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jaccon Bastiaansen 提交于
The RxCFG register of the CS89x0 could be configured incorrectly (because of misplaced parentheses), resulting in the disabling of packet reception. Signed-off-by: NJaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
- 31 8月, 2012 12 次提交
-
-
由 Pablo Neira Ayuso 提交于
Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by: NOliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Merav Sicron 提交于
This patch correct poll_bnx2x (ndo_poll_controller call) which was not functioning well with MSI-X. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Merav Sicron 提交于
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: NMerav Sicron <meravs@broadcom.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Following lockdep splat was reported by Pavel Roskin : [ 1570.586223] =============================== [ 1570.586225] [ INFO: suspicious RCU usage. ] [ 1570.586228] 3.6.0-rc3-wl-main #98 Not tainted [ 1570.586229] ------------------------------- [ 1570.586231] /home/proski/src/linux/net/ipv4/route.c:645 suspicious rcu_dereference_check() usage! [ 1570.586233] [ 1570.586233] other info that might help us debug this: [ 1570.586233] [ 1570.586236] [ 1570.586236] rcu_scheduler_active = 1, debug_locks = 0 [ 1570.586238] 2 locks held by Chrome_IOThread/4467: [ 1570.586240] #0: (slock-AF_INET){+.-...}, at: [<ffffffff814f2c0c>] release_sock+0x2c/0xa0 [ 1570.586253] #1: (fnhe_lock){+.-...}, at: [<ffffffff815302fc>] update_or_create_fnhe+0x2c/0x270 [ 1570.586260] [ 1570.586260] stack backtrace: [ 1570.586263] Pid: 4467, comm: Chrome_IOThread Not tainted 3.6.0-rc3-wl-main #98 [ 1570.586265] Call Trace: [ 1570.586271] [<ffffffff810976ed>] lockdep_rcu_suspicious+0xfd/0x130 [ 1570.586275] [<ffffffff8153042c>] update_or_create_fnhe+0x15c/0x270 [ 1570.586278] [<ffffffff815305b3>] __ip_rt_update_pmtu+0x73/0xb0 [ 1570.586282] [<ffffffff81530619>] ip_rt_update_pmtu+0x29/0x90 [ 1570.586285] [<ffffffff815411dc>] inet_csk_update_pmtu+0x2c/0x80 [ 1570.586290] [<ffffffff81558d1e>] tcp_v4_mtu_reduced+0x2e/0xc0 [ 1570.586293] [<ffffffff81553bc4>] tcp_release_cb+0xa4/0xb0 [ 1570.586296] [<ffffffff814f2c35>] release_sock+0x55/0xa0 [ 1570.586300] [<ffffffff815442ef>] tcp_sendmsg+0x4af/0xf50 [ 1570.586305] [<ffffffff8156fc60>] inet_sendmsg+0x120/0x230 [ 1570.586308] [<ffffffff8156fb40>] ? inet_sk_rebuild_header+0x40/0x40 [ 1570.586312] [<ffffffff814f4bdd>] ? sock_update_classid+0xbd/0x3b0 [ 1570.586315] [<ffffffff814f4c50>] ? sock_update_classid+0x130/0x3b0 [ 1570.586320] [<ffffffff814ec435>] do_sock_write+0xc5/0xe0 [ 1570.586323] [<ffffffff814ec4a3>] sock_aio_write+0x53/0x80 [ 1570.586328] [<ffffffff8114bc83>] do_sync_write+0xa3/0xe0 [ 1570.586332] [<ffffffff8114c5a5>] vfs_write+0x165/0x180 [ 1570.586335] [<ffffffff8114c805>] sys_write+0x45/0x90 [ 1570.586340] [<ffffffff815d2722>] system_call_fastpath+0x16/0x1b Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Commit c3def943 have added support for new pci ids of the 57840 board, while failing to change the obsolete value in 'pci_ids.h'. This patch does so, allowing the probe of such devices. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Francesco Ruggeri 提交于
When tearing down a net namespace, ipv4 mr_table structures are freed without first deactivating their timers. This can result in a crash in run_timer_softirq. This patch mimics the corresponding behaviour in ipv6. Locking and synchronization seem to be adequate. We are about to kfree mrt, so existing code should already make sure that no other references to mrt are pending or can be created by incoming traffic. The functions invoked here do not cause new references to mrt or other race conditions to be created. Invoking del_timer_sync guarantees that ipmr_expire_timer is inactive. Both ipmr_expire_process (whose completion we may have to wait in del_timer_sync) and mroute_clean_tables internally use mfc_unres_lock or other synchronizations when needed, and they both only modify mrt. Tested in Linux 3.4.8. Signed-off-by: NFrancesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bruce Allan 提交于
With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Cc: Stable <stable@vger.kernel.org> [2.6.24+] Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 xeb@mail.ru 提交于
Avoid to use synchronize_rcu in l2tp_tunnel_free because context may be atomic. Signed-off-by: NDmitry Kozlov <xeb@mail.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Commit - "b852b720 gianfar: fix bug caused by 87c288c6" disables by default (on mac init) the hw vlan tag insertion. The "features" flags were not updated to reflect this, and "ethtool -K" shows tx-vlan-offload to be "on" by default. Cc: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [<ffffffff812d423a>] ? in4_pton+0x72/0x131 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by: NRafal Fitt <rafalf@aplusc.com.pl> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Ian Campbell 提交于
I'm slightly concerned by the "only in exceptional circumstances" comment on __pskb_pull_tail but the structure of an skb just created by netfront shouldn't hit any of the especially slow cases. This approach still does slightly more work than the old way, since if we pull up the entire first frag we now have to shuffle everything down where before we just received into the right place in the first place. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mel Gorman <mgorman@suse.de> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of scattered fixes ati/intel/nouveau, couple of core ones, nothing too shocking or different." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S gma500: Consider CRTC initially active. drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS drm/nvc0/copy: check PUNITS to determine which copy engines are disabled i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard drm/i915: Use the correct size of the GTT for placing the per-process entries drm: Check for invalid cursor flags drm: Initialize object type when using DRM_MODE() macro drm/i915: fix color order for BGR formats on IVB drm/i915: fix wrong order of parameters in port checking functions
-
- 30 8月, 2012 10 次提交
-
-
由 Heiko Carstens 提交于
In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Paul Menzel 提交于
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Julia Lawall 提交于
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Alex writes: Highlights: - fix a gart regression on older IGP chips - more MSAA fixes - fix a double free in gpu reset code - modesetting fixes - trinity dig encoder fix. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS
-
由 Forest Bond 提交于
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: NForest Bond <forest.bond@rapidrollout.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Amerigo Wang 提交于
Against -net. In the patch "netpoll: re-enable irq in poll_napi()", I tried to fix the following warning: [100718.051041] ------------[ cut here ]------------ [100718.051048] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x7d/0xb0() (Not tainted) [100718.051049] Hardware name: ProLiant BL460c G7 ... [100718.051068] Call Trace: [100718.051073] [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 [100718.051075] [<ffffffff8106b79a>] ? warn_slowpath_null+0x1a/0x20 [100718.051077] [<ffffffff810747ed>] ? local_bh_enable_ip+0x7d/0xb0 [100718.051080] [<ffffffff8150041b>] ? _spin_unlock_bh+0x1b/0x20 [100718.051085] [<ffffffffa00ee974>] ? be_process_mcc+0x74/0x230 [be2net] [100718.051088] [<ffffffffa00ea68c>] ? be_poll_tx_mcc+0x16c/0x290 [be2net] [100718.051090] [<ffffffff8144fe76>] ? netpoll_poll_dev+0xd6/0x490 [100718.051095] [<ffffffffa01d24a5>] ? bond_poll_controller+0x75/0x80 [bonding] [100718.051097] [<ffffffff8144fde5>] ? netpoll_poll_dev+0x45/0x490 [100718.051100] [<ffffffff81161b19>] ? ksize+0x19/0x80 [100718.051102] [<ffffffff81450437>] ? netpoll_send_skb_on_dev+0x157/0x240 by reenabling IRQ before calling ->poll, but it seems more problems are introduced after that patch: http://ozlabs.org/~akpm/stuff/IMG_20120824_122054.jpg http://marc.info/?l=linux-netdev&m=134563282530588&w=2 So it is safe to fix be2net driver code directly. This patch reverts the offending commit and fixes be_poll() by avoid disabling BH there, this is okay because be_poll() can be called either by poll_napi() which already disables IRQ, or by net_rx_action() which already disables BH. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Reported-by: NSylvain Munaut <s.munaut@whatever-company.com> Cc: Sylvain Munaut <s.munaut@whatever-company.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: NCong Wang <amwang@redhat.com> Tested-by: NSylvain Munaut <s.munaut@whatever-company.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "I've split out the big send/receive update from my last pull request and now have just the fixes in my for-linus branch. The send/recv branch will wander over to linux-next shortly though. The largest patches in this pull are Josef's patches to fix DIO locking problems and his patch to fix a crash during balance. They are both well tested. The rest are smaller fixes that we've had queued. The last rc came out while I was hacking new and exciting ways to recover from a misplaced rm -rf on my dev box, so these missed rc3." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: fix that repair code is spuriously executed for transid failures Btrfs: fix ordered extent leak when failing to start a transaction Btrfs: fix a dio write regression Btrfs: fix deadlock with freeze and sync V2 Btrfs: revert checksum error statistic which can cause a BUG() Btrfs: remove superblock writing after fatal error Btrfs: allow delayed refs to be merged Btrfs: fix enospc problems when deleting a subvol Btrfs: fix wrong mtime and ctime when creating snapshots Btrfs: fix race in run_clustered_refs Btrfs: don't run __tree_mod_log_free_eb on leaves Btrfs: increase the size of the free space cache Btrfs: barrier before waitqueue_active Btrfs: fix deadlock in wait_for_more_refs btrfs: fix second lock in btrfs_delete_delayed_items() Btrfs: don't allocate a seperate csums array for direct reads Btrfs: do not strdup non existent strings Btrfs: do not use missing devices when showing devname Btrfs: fix that error value is changed by mistake Btrfs: lock extents as we map them in DIO ...
-