- 26 1月, 2017 1 次提交
-
-
由 Chen-Yu Tsai 提交于
All dts files for the sunxi platform have been switched to the generic pinconf bindings. As a result, the sunxi specific pinctrl macros are no longer used. Remove the #include entry with the following command: sed -i -e '/pinctrl\/sun4i-a10.h/D' \ arch/arm64/boot/dts/allwinner/*.dts? Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 06 1月, 2017 2 次提交
-
-
由 Icenowy Zheng 提交于
Allwinner A64 SoC has a MUSB controller like the one in A33, so add a node for it, just use the compatible of A33 MUSB. Host mode is tested to work properly on Pine64 and will be added into the device tree of Pine64 in next patch. Peripheral mode is also tested on Pine64, by changing dr_mode property of usb_otg node and use a non-standard USB Type-A to Type-A cable. Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Icenowy Zheng 提交于
Allwinner A64 have two HCI USB controllers, a OTG controller and a USB PHY device which have two ports. One of the port is wired to both a HCI USB controller and the OTG controller, which is currently not supported. The another one is only wired to a HCI controller, and the device node of OHCI/EHCI controller of the port can be added now. Also the A64 USB PHY device node is also added for the HCI controllers to work. Signed-off-by: NIcenowy Zheng <icenowy@aosc.xyz> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 30 11月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
Two branches were incorrectly sent without having the necessary header file changes. Rather than back those out now, I'm replacing the symbolic names for the clks and resets with the numeric values to get 'make allmodconfig dtbs' back to work. After the header file changes are merged, we can revert this patch. Fixes: 6bc37fac ("arm64: dts: add Allwinner A64 SoC .dtsi") Fixes: 50784e61 ("dts: arm64: db820c: add pmic pins specific dts file") Acked-by: NAndre Przywara <andre.przywara@arm.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 03 11月, 2016 1 次提交
-
-
由 Andre Przywara 提交于
The Allwinner A64 SoC is a low-cost chip with 4 ARM Cortex-A53 cores and the typical tablet / TV box peripherals. The SoC is based on the (32-bit) Allwinner H3 chip, sharing most of the peripherals and the memory map. Although the cores are proper 64-bit ones, the whole SoC is actually limited to 4GB (including all the supported DRAM), so we use 32-bit address and size cells. This has the nice feature of us being able to reuse the DT for 32-bit kernels as well. This .dtsi lists the hardware that we support so far. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Acked-by: NRob Herring <robh@kernel.org> Acked-by: NChen-Yu Tsai <wens@csie.org> [Maxime: Convert to CCU binding, drop the MMC support for now] Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-