The pcie->port of port service device points the port associated
the service with.  The find_aer_service iterates over children of
given port udev.

So it is clear that the pcie->port of port service of given port
udev must always point the udev.

Therefore we can know the type of udev without checking its children.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Make it clear that we only interest in 2 *_RCV bits.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The Error Source Identification Register (Offset 34h) is 4 byte
which contains a couple of 2 byte field, "[15:0] ERR_COR Source
Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification."

This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Move dev_printks for debug into do_recovery().
This allows do_recovery() to return void.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Current get_e_source() returns pointer to an element of array.
However since it also progress consume counter, it is possible
that the element is overwritten by newly produced data before
the element is really consumed.

This patch changes get_e_source() to copy contents of the element
to address pointed by its caller.  Once copied the element in
array can be consumed.

And relocate this function to more innocuous place.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Divide tricky for-loop into readable if-blocks.

The logic to set multi_error_valid (to force walking pci bus
hierarchy to find 2nd~ error devices) is changed too, to check
MULTI_{,_UN}COR_RCV bit individually and to force walk only when
it is required.

And rework setting e_info->severity for uncorrectable, not to use
magic numbers.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Stop iteration if we cannot register any more.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Inline too-simple subroutine only used here.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Take core part of find_device_iter() to make a new function
is_error_source() that checks given device has report an error
or not.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Return bool to indicate that the source device is found or not.
This allows us to skip calling aer_process_err_devices() if we can.

And move dev_printk for debug into this function.

v2: return bool instead of int
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

These functions are only called from init/remove path of aerdrv,
so move them from aerdrv_core.c to aerdrv.c, to make them static.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This cleanup solves some minor naming issues by removing unuseful
function aer_delete_rootport() and by renaming disable_root_aer()
to aer_disable_rootport().

- Inconsistent location of alloc & free:
   The struct rpc is allocated in aer_alloc_rpc() at aerdrv.c
   while it is implicitly freed in aer_delete_rootport() at
   aerdrv_core.c.

- Inconsistent function name:
   It makes a bit confusion that aer_delete_rootport() is seemed
   to be paired with aer_enable_rootport(), i.e. there is neither
   "add" against "delete" nor "disable" against "enable".
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Handle preserved bits properly.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Follow new format.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

A successful write() to the "reset" sysfs attribute should return the
number of bytes written, not 0. Otherwise userspace (bash) retries the
write over and over again.
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Most current machines have no problem with this, and in fact many devices and
features work best (or only!) with MSI.
Reported-by: NPetteri Räty <betelgeuse@gentoo.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

SuperIO devices share regions and use lock/unlock operations to chip
select.  We therefore need to be able to request a resource and wait for
it to be freed by whichever other SuperIO device currently hogs it.
Right now you have to poll which is horrible.

Add a MUXED field to IO port resources. If the MUXED field is set on the
resource and on the request (via request_muxed_region) then we block
until the previous owner of the muxed resource releases their region.

This allows us to implement proper resource sharing and locking for
superio chips using code of the form

enable_my_superio_dev() {
	request_muxed_region(0x44, 0x02, "superio:watchdog");
	outb() ..sequence to enable chip
}

disable_my_superio_dev() {
	outb() .. sequence of disable chip
	release_region(0x44, 0x02);
}
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

pci_config_lock must be a real spinlock in preempt-rt. Convert it to
raw_spinlock. No change for !RT kernels.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

pci_lock must be a real spinlock in preempt-rt. Convert it to
raw_spinlock. No change for !RT kernels.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch (as1353) removes a couple of unnecessary assignments from
the PCI core.  The should_wakeup flag is naturally initialized to 0;
there's no need to clear it.
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Create convenience symlinks in sysfs, linking slots to device
functions, and vice versa. These links make it easier for users to
figure out which devices actually live in what slots.

For example:

sapphire:/sys/bus/pci/slots # ls
1  10  2  3  4  5  6  7  8  9

sapphire:/sys/bus/pci/slots # ls -l 3
total 0
-r--r--r-- 1 root root 65536 Aug 18 14:10 address
lrwxrwxrwx 1 root root     0 Aug 18 14:10 function0 ->
../../../../devices/pci0000:23/0000:23:01.0
lrwxrwxrwx 1 root root     0 Aug 18 14:10 function1 ->
../../../../devices/pci0000:23/0000:23:01.1

sapphire:/sys/bus/pci/slots # ls -l 3/function0/slot
lrwxrwxrwx 1 root root 0 Aug 18 14:13 3/function0/slot ->
../../../bus/pci/slots/3

The original form of this patch was written by Matthew Wilcox,
and was enhanced to include links from the sysfs slots/ directory
pointing back at the device functions.

Cc: willy@linux.intel.com
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Fix 3 regressions - since buffer rework

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Fix FDDI and TR config checks in ipv4 arp and LLC.
  IPv4: unresolved multicast route cleanup
  mac80211: remove association work when processing deauth request
  ar9170: wait for asynchronous firmware loading
  ipv4: udp: fix short packet and bad checksum logging
  phy: Fix initialization in micrel driver.
  sctp: Fix a race between ICMP protocol unreachable and connect()
  veth: Dont kfree_skb() after dev_forward_skb()
  IPv6: fix IPV6_RECVERR handling of locally-generated errors
  net/gianfar: drop recycled skbs on MTU change
  iwlwifi: work around passive scan issue

Fix an occasional EIO returned by a call to vfs_unlink():

	[ 4868.465413] CacheFiles: I/O Error: Unlink failed
	[ 4868.465444] FS-Cache: Cache cachefiles stopped due to I/O error
	[ 4947.320011] CacheFiles: File cache on md3 unregistering
	[ 4947.320041] FS-Cache: Withdrawing cache "mycache"
	[ 5127.348683] FS-Cache: Cache "mycache" added (type cachefiles)
	[ 5127.348716] CacheFiles: File cache on md3 registered
	[ 7076.871081] CacheFiles: I/O Error: Unlink failed
	[ 7076.871130] FS-Cache: Cache cachefiles stopped due to I/O error
	[ 7116.780891] CacheFiles: File cache on md3 unregistering
	[ 7116.780937] FS-Cache: Withdrawing cache "mycache"
	[ 7296.813394] FS-Cache: Cache "mycache" added (type cachefiles)
	[ 7296.813432] CacheFiles: File cache on md3 registered

What happens is this:

 (1) A cached NFS file is seen to have become out of date, so NFS retires the
     object and immediately acquires a new object with the same key.

 (2) Retirement of the old object is done asynchronously - so the lookup/create
     to generate the new object may be done first.

     This can be a problem as the old object and the new object must exist at
     the same point in the backing filesystem (i.e. they must have the same
     pathname).

 (3) The lookup for the new object sees that a backing file already exists,
     checks to see whether it is valid and sees that it isn't.  It then deletes
     that file and creates a new one on disk.

 (4) The retirement phase for the old file is then performed.  It tries to
     delete the dentry it has, but ext4_unlink() returns -EIO because the inode
     attached to that dentry no longer matches the inode number associated with
     the filename in the parent directory.

The trace below shows this quite well.

	[md5sum] ==> __fscache_relinquish_cookie(ffff88002d12fb58{NFS.fh,ffff88002ce62100},1)
	[md5sum] ==> __fscache_acquire_cookie({NFS.server},{NFS.fh},ffff88002ce62100)

NFS has retired the old cookie and asked for a new one.

	[kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_ACTIVE,24})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_DYING]
	[kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_INIT,0})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_LOOKING_UP]
	[kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_DYING,24})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_RECYCLING]

The old object (OBJ52) is going through the terminal states to get rid of it,
whilst the new object - (OBJ53) - is coming into being.

	[kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_LOOKING_UP,0})
	[kslowd] ==> cachefiles_walk_to_object({ffff88003029d8b8},OBJ53,@68,)
	[kslowd] lookup '@68'
	[kslowd] next -> ffff88002ce41bd0 positive
	[kslowd] advance
	[kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA'
	[kslowd] next -> ffff8800369faac8 positive

The new object has looked up the subdir in which the file would be in (getting
dentry ffff88002ce41bd0) and then looked up the file itself (getting dentry
ffff8800369faac8).

	[kslowd] validate 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA'
	[kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA')
	[kslowd] remove ffff8800369faac8 from ffff88002ce41bd0
	[kslowd] unlink stale object
	[kslowd] <== cachefiles_bury_object() = 0

It then checks the file's xattrs to see if it's valid.  NFS says that the
auxiliary data indicate the file is out of date (obvious to us - that's why NFS
ditched the old version and got a new one).  CacheFiles then deletes the old
file (dentry ffff8800369faac8).

	[kslowd] redo lookup
	[kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA'
	[kslowd] next -> ffff88002cd94288 negative
	[kslowd] create -> ffff88002cd94288{ffff88002cdaf238{ino=148247}}

CacheFiles then redoes the lookup and gets a negative result in a new dentry
(ffff88002cd94288) which it then creates a file for.

	[kslowd] ==> cachefiles_mark_object_active(,OBJ53)
	[kslowd] <== cachefiles_mark_object_active() = 0
	[kslowd] === OBTAINED_OBJECT ===
	[kslowd] <== cachefiles_walk_to_object() = 0 [148247]
	[kslowd] <== fscache_object_state_machine() [->OBJECT_AVAILABLE]

The new object is then marked active and the state machine moves to the
available state - at which point NFS can start filling the object.

	[kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_RECYCLING,20})
	[kslowd] ==> fscache_release_object()
	[kslowd] ==> cachefiles_drop_object({OBJ52,2})
	[kslowd] ==> cachefiles_delete_object(,OBJ52{ffff8800369faac8})

The old object, meanwhile, goes on with being retired.  If allocation occurs
first, cachefiles_delete_object() has to wait for dir->d_inode->i_mutex to
become available before it can continue.

	[kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA')
	[kslowd] remove ffff8800369faac8 from ffff88002ce41bd0
	[kslowd] unlink stale object
	EXT4-fs warning (device sda6): ext4_unlink: Inode number mismatch in unlink (148247!=148193)
	CacheFiles: I/O Error: Unlink failed
	FS-Cache: Cache cachefiles stopped due to I/O error

CacheFiles then tries to delete the file for the old object, but the dentry it
has (ffff8800369faac8) no longer points to a valid inode for that directory
entry, and so ext4_unlink() returns -EIO when de->inode does not match i_ino.

	[kslowd] <== cachefiles_bury_object() = -5
	[kslowd] <== cachefiles_delete_object() = -5
	[kslowd] <== fscache_object_state_machine() [->OBJECT_DEAD]
	[kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_AVAILABLE,0})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_ACTIVE]

(Note that the above trace includes extra information beyond that produced by
the upstream code).

The fix is to note when an object that is being retired has had its object
deleted preemptively by a replacement object that is being created, and to
skip the second removal attempt in such a case.
Reported-by: NGreg M <gregm@servu.net.au>
Reported-by: NMark Moseley <moseleymark@gmail.com>
Reported-by: NRomain DEGEZ <romain.degez@smartjog.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Duplicate entries ended up acpisleep_dmi_table[] by accident.
They don't hurt functionality, but they are ugly, so let's get
rid of them.

Cc: stable@kernel.org
Signed-off-by: NAlex Chiang <achiang@canonical.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b4fe9454 introduced 3 bugs,
fix them:

* Use the right command dword for second packet offset in
  RADEON_CNTL_PAINT/BITBLT_MULTI.
* Don't leak memory if drm_buffer_copy_from_user() fails.
* Don't call drm_buffer_unprocessed() unless drm_buffer_alloc() and
  drm_buffer_copy_from_user() have been called successfully first.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Revert "ALSA: hda/realtek: quirk for D945GCLF2 mainboard"
  ALSA: hda - add support for Lenovo ThinkPad X100e in conexant codec
  ALSA: hda - fix DG45ID SPDIF output

After commit 1f36f774 ("Switch !O_CREAT case to use of do_last()") in
2.6.34-rc1 autofs direct mounts stopped working.  This is caused by
current->link_count being 0 when ->follow_link() is called from
do_filp_open().

I can't work out why this hasn't been seen before Als patch series.

This patch removes the autofs dependence on current->link_count.
Signed-off-by: NIan Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix suspend crash by moving initializations earlier
  HID: sony: fix sony_set_operational_bt
  HID: ntrig: Remove unused macro, TripleTap and QuadTap
  HID: ntrig: TipSwitch for single touch mode touch.
  HID: hidraw: fix numbered reports
  HID: wacom: remove annoying non-error printk
  HID: ntrig: Emit TOUCH with DOUBLETAP for single touch
  HID: add support for cymotion master solar keyboard
  HID: ntrig: explain firmware quirk
  HID: fix N-trig touch panel with recent firmware

This reverts commit 7aee6746.

As it doesn't seem to be universally valid for all mainboard revisions of
the D945GCLF2 and breaks snd-hda-intel/ snd-hda-codec-realtek on the Intel
Corporation "D945GCLF2" (LF94510J.86A.0229.2009.0729.0209) mainboard.

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: <stable@kernel.org> [2.6.33]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Need to check both CONFIG_FOO and CONFIG_FOO_MODULE
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the expiration timer for unresolved multicast route entries.
In case new multicast routing requests come in faster than the 
expiration timeout occurs (e.g. zap through multicast TV streams), the 
timer is prevented from being called at time for already existing entries.

As the single timer is resetted to default whenever a new entry is made, 
the timeout for existing unresolved entires are missed and/or not 
updated. As a consequence new requests are denied when the limit of 
unresolved entries has been reached because old entries live longer than 
they are supposed to.

The solution is to reset the timer only for the first unresolved entry 
in the multicast routing cache. All other timers are already set and 
updated correctly within the timer function itself by now.

Signed-off by: Andreas Meissner <andreas.meissner@sphairon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ideapad quirks working for my ThinkPad X100e (microphone is not tested).
Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error
  [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error
  [SCSI] scsi_debug: virtual_gb ignores sector_size
  [SCSI] libiscsi: regression: fix header digest errors
  [SCSI] fix locking around blk_abort_request()
  [SCSI] advansys: fix narrow board error path

commit 672917dc ("cpuidle: menu governor: reduce latency on exit")
added an optimization, where the analysis on the past idle period moved
from the end of idle, to the beginning of the new idle.

Unfortunately, this optimization had a bug where it zeroed one key
variable for new use, that is needed for the analysis.  The fix is
simple, zero the variable after doing the work from the previous idle.

During the audit of the code that found this issue, another issue was
also found; the ->measured_us data structure member is never set, a
local variable is always used instead.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Although the usbhid driver allocates its usbhid structure in the probe
routine, several critical fields in that structure don't get
initialized until usbhid_start().  However if report descriptor
parsing fails then usbhid_start() is never called.  This leads to
problems during system suspend -- the system will freeze.

This patch (as1378) fixes the bug by moving the initialization
statements up into usbhid_probe().
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NBruno Prémont <bonbons@linux-vserver.org>
Tested-By: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

* 'for-linus' of git://neil.brown.name/md:
  md: restore ability of spare drives to spin down.
  md/raid6: Fix raid-6 read-error correction in degraded state

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: fix compilation after 16bit state locking changes
  pcmcia: order userspace suspend and resume requests
  pcmcia: avoid pccard_validate_cis failure in resume callpath