Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to BSpec we need to always set this magic bit in ring buffer
mode.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we need precisely N lanes to satisfy the FDI bandwidth requirement,
the code would still claim that we need N+1 lanes. Use DIV_ROUND_UP()
to get a more accurate answer.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On DDI there's no PLL as such to generate the pixel clock for VGA.
Instead we derive the pixel clock from the FDI link frequency. So
to make .compute_config match what .get_config does, we need to
set the port_clock based on the FDI link frequency.

Note that we don't even check the port_clock when selecting the
PLL for VGA output. We just assume SPLL at 1.35GHz is what we want,
and that does match with the asumption of FDI frequency of 2.7Ghz
we have in intel_fdi_link_freq().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74955Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

as they don't exists.

v2: rename gen6_*_mt_* to gen7_*_mt_* as they never get called
    with gen6 (Chris)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we get control from BIOS there might be mt forcewake
bits already set. This causes us to do double mt get
without proper clear/ack sequence.

Fix this by clearing mt forcewake register on init,
like we do with older gens.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

BDW is no longer flagged as preliminary hw, but without
i915.preliminary_hw_support module param set the logs are filled with
WARNs about it.

Just make semaphores off the BDW per-chip default for now.

CC: Ben Widawsky <ben@bwidawsk.net>
Reported-by: NSebastien Dufour <sebastien.dufour@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ben and I believe this will be necessary on production hardware.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
[danvet: Shuffle lines to group all ROW_CHICKEN writes and add a
cautious comment that this might not be needed on production hw.]
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I believe this will be necessary on production hardware.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Fix whitespace fail spotted by checkpatch. Also add missing
:bdw w/a tag that Ville spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For example if we get bug reports with similar error states and
suspend count is always 1, that might lead the Sherlocks to
right general direction.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

By default we keep only the error state from first hang. However
some sneaky user might have cleared the first error state and we
assume mistakenly that it is from first hang. As sometimes this
matters, it is better to explicitly store the reset count.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We capture error state not only when the GPU hangs but also on
other situations as in interrupt errors and in situations where
we can kick things forward without GPU reset. There will be log
entry on most of these cases. But as error state capture might be
only thing we have, if dmesg was not captured. Or as in GEN4 case,
interrupt error can trigger error state capture without log entry,
the exact reason why capture was made is hard to decipher.

v2: Split out the the error code stuff to separate patch (Ben)

References: https://bugs.freedesktop.org/show_bug.cgi?id=74193Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

commit 011cf577
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Tue Feb 4 12:18:55 2014 +0000

    drm/i915: Generate a hang error code

added error code debug into dmesg. Store this also
with error state to make matching dmesg logs and error
states easier.

As we need to have full ring state for error code generation,
do full capture always, print hang message into log and then
decide if we need to keep the error state.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After finding the guilty batch and request, we can use it to find the
process that submitted the batch and then add the culprit into the error
state.

This is a slightly different approach from Ben's in that instead of
adding the extra information into the struct i915_hw_context, we use the
information already captured in struct drm_file which is then referenced
from the request.

v2: Also capture the workaround buffer for gen2, so that we can compare
    its contents against the intended batch for the active request.

v3: Rebase (Mika)
v4: Check for null context (Chris)
    checkpatch warnings fixed

Link: http://lists.freedesktop.org/archives/intel-gfx/2013-August/032280.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> (v4)
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the past, it was possible to have multiple batches per request due to
a stray signal or ENOMEM. As a result we had to scan each active object
(filtered by those having the COMMAND domain) for the one that contained
the ACTHD pointer. This was then made more complicated by the
introduction of ppgtt, whereby ACTHD then pointed into the address space
of the context and so also needed to be taken into account.

This is a fairly robust approach (though the implementation is a little
fragile and depends upon the per-generation setup, registers and
parameters). However, due to the requirements for hangstats, we needed a
robust method for associating batches with a particular request and
having that we can rely upon it for finding the associated batch object
for error capture.

If the batch buffer tracking is not robust enough, that should become
apparent quite quickly through an erroneous error capture. That should
also help to make sure that the runtime reporting to userspace is
robust. It also means that we then report the oldest incomplete batch on
each ring, which can be useful for determining the state of userspace at
the time of a hang.

v2: Use i915_gem_find_active_request (Mika)

v3: remove check for ring->get_seqno, split long lines (Ben)

v4: check that context is available (Chris)
    checkpatch warnings fixed

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> (v3)
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v3)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In place of true activity counting, we walk the list of vma associated
with an object managing each on the vm's active/inactive list everytime
we call move-to-inactive. This depends upon the vma->mm_list being
cleared after unbinding, or else we run into difficulty when tracking
the object in multiple vm's - we see a use-after free and corruption of
the mm_list.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It occured to me that when we're trying to wake up both render
and media wells on VLV, we might end up calling the low level
force_wake_get/put two times even though one call would be
enough. Make that happen by figuring out which wells really
need to be woken up based on the forcewake counts.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV is the only platform where we increment/decrement the forcewake
count around register access. Drop the inc/dec on VLV to make the
forcewake code a bit more unified.

The inc/dec are not necessary since we hold the uncore lock around
the whole operation.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the render/media specific forcewake counts to properly restore the
forcewake status after a GPU reset on VLV.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDeepak S <deepak.s@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After a hang and failed reset, we cannot use the GPU to execute the page
flip instructions. Instead we can force a synchronous mmio flip. (Later,
we can reduce the synchronicity of the mmio flip by moving some of the
delays off to a worker, like the current page flip code; see vblank
tasks.)

References: https://bugs.freedesktop.org/show_bug.cgi?id=72631Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I could swear this was already happening in the current code...

Also, put the reads and writes in a generic place, so we don't forget
it again when we add runtime PM support to new platforms.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just to be sure...
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because we shouldn't be runtime suspended when forcewake is supposed
to be enabled.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
[danvet: Update commit message - no WARN expected since the bugfix for
issues hit with this assert is already in. And resolve conflicts with
the change from worker to timer for the delayed fw release.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since the addition of dev_priv->mm.busy, there's no more need for
dev_priv->pc8.gpu_idle, so kill it.

Notice that when you remove gpu_idle, hsw_package_c8_gpu_idle and
hsw_package_c8_gpu_busy become identical to hsw_enable_package_c8 and
hsw_disable_package_c8, so just use them.

Also, when we boot the machine, dev_priv->mm.busy initially considers
the machine as idle. This is opposed to dev_priv->pc8.gpu_idle, which
considered it busy. So dev_priv->pc8.disable_count has to be
initalized to 1 now.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are places where we read (not write) registers while we're
runtime suspended.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise we'll read registers that return 0xffffffff, trigger some
WARNs, think CRT is actually connected (because certain bits are 1),
and fail the drm-resources-equal testcase!

Tested on a SNB machine with runtime PM support (which is not upstream
yet, but is already on my public tree at freedesktop.org, and will
hopefully eventually become upstream).

Testcase: igt/pm_pc8/drm-resources-equal
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we call gen6_gt_force_wake_put we don't actually put force_wake,
we just schedule gen6_force_wake_work through mod_delayed_work, and
that will eventually release force_wake.

The problem is that we call intel_runtime_pm_put directly at
gen6_gt_force_wake_put, so most of the times we put our runtime PM
reference before the delayed work happens, so we may runtime suspend
while force_wake is still supposed to be enabled if the graphics
autosuspend_delay_ms is too small.

Now the nice thing about the current code is that after it triggers
the delayed work function it gets a refcount, and it only triggers the
delayed work function if refcount is zero. This guarantees that when
we schedule the funciton, it will run before we try to schedule it
again, which simplifies the problem and allows for the current
solution to work properly (hopefully!).

v2: - Keep the VLV refcounts balanced (Jesse)
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because intel_mark_idle still touches some registers: it needs the
machine to be awake. If you set both the autosuspend and PC8 delays to
zero, you can get a "Device suspended" WARN when gen6_rps_idle touches
registers.

This is not easy to reproduce, but happens once in a while when
running pm_pc8.

Testcase: igt/pm_pc8
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we've explicitly stopped the rings for testing purposes, don't ban
the default context. Fixes kms_flip hang tests.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Useful for bug reports.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

MIPI Block #52 which provides configuration details for the MIPI panel
including dphy settings as per panel and tcon specs

Block #53 gives information on panel enable sequences

v2: Address review comemnts from Jani
    - Move panel ids from intel_dsi.h to intel_bios.h
    - bdb_mipi_config structure improvements for cleaner code
    - Adding units for the pps delays, all in ms
    - change data structure to be more cleaner and simple

v3: Corrected the unit for pps delays as 100us
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't want to suffer scheduling delay when turning off the GPU after
waking it up to touch registers. Ideally, we only want to keep the GPU
awake for the register access sequence, with a single forcewake dance on
the first access and release immediately after the last. We set a timer
on the first access so that we only dance once and on the next scheduler
tick, we drop the forcewake again.

This moves the cleanup routine from the common i915 workqueue to a timer
func so that we don't anger powertop, and drop the forcewake again
quicker.

v2: Enable the deferred force_wake_put for regular register reads as
    well.
v3: Beautification and make sure we disable forcewake when shutting
    down.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This got lost when we shuffled around our internal branch and
GEN7_FEATURES macro. There were no HW changes to support FBC, so we just
need to set the flag.

v2: Don't allow FBC for any pipe but A on platforms with DDI. (Paulo)

Cc: Daisy Sun <daisy.sun@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We currently call intel_mark_idle() too often, as we do so as a
side-effect of processing the request queue. However, we the calls to
intel_mark_idle() are expected to be paired with a call to
intel_mark_busy() (or else we try to idle the hardware by accessing
registers that are already disabled). Make the idle/busy tracking
explicit to prevent the multiple calls.

v2: We can drop some of the complexity in __i915_add_request() as
queue_delayed_work() already behaves as we want (not requeuing the item
if it is already in the queue) and mark_busy/mark_idle imply that the
idle task is inactive.

v3: We do still need to cancel the pending idle task so that it is sent
again after the current busy load completes (not in the middle of it).
Reported-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sometimes generic driver code gets forcewake explicitly by
gen6_gt_force_wake_get(), which check forcewake_count before accessing
hardware. However the register access with gen8_write function access
low level hw accessors directly, ignoring the forcewake_count. This
leads to nested forcewake get from hardware, in ring init and possibly
elsewhere, causing forcewake ack clear errors and/or hangs.

Fix this by checking the forcewake count also in gen8_write

v2: Read side doesn't care about shadowed registers,
    Remove __needs_put funkiness from gen8_write. (Ville)
    Improved commit message.

References: https://bugs.freedesktop.org/show_bug.cgi?id=74007Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This way we can reuse the check on other platforms too. Also factor out
a version of the function that doesn't check if the power is on, we'll
need to call this from within the power domain framework.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV at least the display IRQ register access and functionality
depends on its power well to be on, so move the power domain HW init
before we install the IRQs.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The power domains framework is internal to the i915 driver, so pass
drm_i915_private instead of drm_device to its functions.

Also remove a dangling intel_set_power_well() declaration.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Both Ville and QA rather immediately complained that with the new
initial_config logic from Jesse not all outputs get enabled. Since the
fbdev emulation pretty much tries to always enable as many outputs as
possible (it even has hotplug handling and all that) fall back if more
outputs could have been enabled.

v2: Fix up my confusion about what enabled means - it's passed from
the fbdev helper, we need to check for a non-zero connector->encoder
link. Spotted by Ville.

v3: Add some debug output as requested by Jesse for debugging fallback
issues.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75552Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>