Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-17-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NJyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-16-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-15-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove duplicate ldev assignment.

Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NPhilippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-14-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-13-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-11-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-8-noralf@tronnes.org

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-6-noralf@tronnes.org

Add functions drm_fb_cma_fbdev_init(), drm_fb_cma_fbdev_fini() and
drm_fb_cma_fbdev_init_with_funcs(). These functions relies on the fact
that the drm_fb_helper struct is stored in dev->drm_fb_helper_private
so drivers don't need to store it.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-3-noralf@tronnes.org

Make the drm_framebuffer_funcs argument optional for drivers that
don't need to set the dirty callback.
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-2-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-12-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-11-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-9-noralf@tronnes.org

This driver can use drm_fb_helper_output_poll_changed() instead of
its own nouveau_fbcon_output_poll_changed().

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-8-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-7-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-6-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NInki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-5-noralf@tronnes.org

This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-4-noralf@tronnes.org

The VPU init misses these configurations values.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1512561268-29806-5-git-send-email-narmstrong@baylibre.com

On reference boards and derivatives, the HDMI Logic is powered by an external
5V regulator.
This regulator was set by the Vendor U-Boot, add optional support for it.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1512561268-29806-4-git-send-email-narmstrong@baylibre.com

On reference boards and derivatives, the HDMI Logic is powered by an external
5V regulator.
This regulator was set by the Vendor U-Boot, add optional support for it.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1512561268-29806-3-git-send-email-narmstrong@baylibre.com

The Video Processing Unit power domain was setup by the Vendor U-Boot,
add support for an optional Power Domain phandle to setup it from the kernel.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NJerome Brunet <jbrunet@baylibre.com>
Reviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1512561268-29806-2-git-send-email-narmstrong@baylibre.com

We're spotting this very rarely in CI, but have no idea. Let's add
more debug info about what's going on here.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102707Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171207144925.14191-1-daniel.vetter@ffwll.ch

min_scale and max_scale in sun8i_vi_layer_atomic_check() can be used
without initialization.

Fix that.

Fixes: b862a648 ("drm/sun4i: Add support for HW scaling to DE2")
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206152603.25937-1-jernej.skrabec@siol.net

fb_helper is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.

Fix this by moving the pointer dereference after fb_helper
has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c777990f ("drm/fb-helper: Handle function NULL argument")
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205174628.GA31189@embeddedor.com

Add SPDX identifiers to files under stm directory
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206112947.9569-1-benjamin.gaignard@st.com

Add SPDX identifiers to files under sti directory
Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206112947.9569-2-benjamin.gaignard@st.com

Replace driver's code with the generic helpers that do the same thing.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Acked-by: NStefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114212517.23536-5-noralf@tronnes.org

Now that we have all required bits, add support for YUV formats.

DRM subsystem doesn't know YUV411 semi-planar format, so leave that out
for now.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-27-jernej.skrabec@siol.net

Basic principle of operation when using YUV framebuffer is that chroma
planes have to be upscaled to same size as luma.

Because of that, expand DE2 scaler library to support that.

BSP driver uses another set of FIR filter coefficients for YUV planes.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-26-jernej.skrabec@siol.net

This commit expands translation of DRM YUV format to HW specific
information.

It doesn't do any functional changes.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-25-jernej.skrabec@siol.net

DE2 have many CSC units - channel input CSC, channel output CSC and
mixer output CSC and maybe more.

Fortunately, they have all same register layout, only base offsets
differs.

Add support only for channel output CSC for now.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net

Base addresses of channel output CSC (CCSC) depends whether mixer in
question is first or second and if it is second, if supports VEP or not.
This new property will tell which set of base addresses to take.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-23-jernej.skrabec@siol.net

Scaling is currently supported only for RGB framebuffers

Coefficients and algorithm which coefficients to select are taken
from BSP driver.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-22-jernej.skrabec@siol.net

No all SoCs support scaling on all channels. For example, V3s support
scaling only on VI channels. Because of that, add additional
configuration bitmask which tells which channel support scaler.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-21-jernej.skrabec@siol.net

This commit adds basic support for VI planes. They are meant for video
overlay and because of that they support YUV formats too. However, using
YUV format is not straightforward, so only RGB formats are supported for
now.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net

Till now, DE2 driver supported only UI planes. Before we add support for
VI planes, lets split out UI layer specific code from common parts. This
commit does the following:
- renames sun8i_layer.c to sun8i_ui_layer.c
- moves UI channel specific code to sun8i_ui_layer.c
- moves common code from sun8i_layer.c to sun8i_mixer.c
- renames function and structure names so it is apparent where they
belong to

No functional change is made.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net

Currently only a few RGB formats are supported by the DE2 driver. Add
support for all formats supported by the HW.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-18-jernej.skrabec@siol.net

Support for multiple UI planes can now be easily enabled just by adding
more planes with different index.

For now, add immutable zpos property.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-17-jernej.skrabec@siol.net

There is no point having code which sets interlace mode of mixer in
channel related function. Interlace mode will only change when CRTC
state will change, so let's move it to the block which is executed only
when primary plane state is changed.
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-16-jernej.skrabec@siol.net