Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 25 11月, 2014 2 次提交
    • R
      tipc: add tipc_netlink.h to uapi Kbuild · 4f037215
      由 Richard Alpe 提交于 
      tipc_netlink.h is the user-space header for the new netlink api. It
was accidentally left out of the uapi Kbuild list when the api was
added.
Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4f037215
    • M
      ipvlan: Initial check-in of the IPVLAN driver. · 2ad7bf36
      由 Mahesh Bandewar 提交于 
      This driver is very similar to the macvlan driver except that it
uses L3 on the frame to determine the logical interface while
functioning as packet dispatcher. It inherits L2 of the master
device hence the packets on wire will have the same L2 for all
the packets originating from all virtual devices off of the same
master device.

This driver was developed keeping the namespace use-case in
mind. Hence most of the examples given here take that as the
base setup where main-device belongs to the default-ns and
virtual devices are assigned to the additional namespaces.

The device operates in two different modes and the difference
in these two modes in primarily in the TX side.

(a) L2 mode : In this mode, the device behaves as a L2 device.
TX processing upto L2 happens on the stack of the virtual device
associated with (namespace). Packets are switched after that
into the main device (default-ns) and queued for xmit.

RX processing is simple and all multicast, broadcast (if
applicable), and unicast belonging to the address(es) are
delivered to the virtual devices.

(b) L3 mode : In this mode, the device behaves like a L3 device.
TX processing upto L3 happens on the stack of the virtual device
associated with (namespace). Packets are switched to the
main-device (default-ns) for the L2 processing. Hence the routing
table of the default-ns will be used in this mode.

RX processins is somewhat similar to the L2 mode except that in
this mode only Unicast packets are delivered to the virtual device
while main-dev will handle all other packets.

The devices can be added using the "ip" command from the iproute2
package -

	ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2ad7bf36
  3. 22 11月, 2014 15 次提交
  5. 20 11月, 2014 5 次提交
  7. 19 11月, 2014 4 次提交
    • A
      bpf: allow eBPF programs to use maps · d0003ec0
      由 Alexei Starovoitov 提交于 
      expose bpf_map_lookup_elem(), bpf_map_update_elem(), bpf_map_delete_elem()
map accessors to eBPF programs
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d0003ec0
    • A
      bpf: add array type of eBPF maps · 28fbcfa0
      由 Alexei Starovoitov 提交于 
      add new map type BPF_MAP_TYPE_ARRAY and its implementation

- optimized for fastest possible lookup()
  . in the future verifier/JIT may recognize lookup() with constant key
    and optimize it into constant pointer. Can optimize non-constant
    key into direct pointer arithmetic as well, since pointers and
    value_size are constant for the life of the eBPF program.
    In other words array_map_lookup_elem() may be 'inlined' by verifier/JIT
    while preserving concurrent access to this map from user space

- two main use cases for array type:
  . 'global' eBPF variables: array of 1 element with key=0 and value is a
    collection of 'global' variables which programs can use to keep the state
    between events
  . aggregation of tracing events into fixed set of buckets

- all array elements pre-allocated and zero initialized at init time

- key as an index in array and can only be 4 byte

- map_delete_elem() returns EINVAL, since elements cannot be deleted

- map_update_elem() replaces elements in an non-atomic way
  (for atomic updates hashtable type should be used instead)
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      28fbcfa0
    • A
      bpf: add hashtable type of eBPF maps · 0f8e4bd8
      由 Alexei Starovoitov 提交于 
      add new map type BPF_MAP_TYPE_HASH and its implementation

- maps are created/destroyed by userspace. Both userspace and eBPF programs
  can lookup/update/delete elements from the map

- eBPF programs can be called in_irq(), so use spin_lock_irqsave() mechanism
  for concurrent updates

- key/value are opaque range of bytes (aligned to 8 bytes)

- user space provides 3 configuration attributes via BPF syscall:
  key_size, value_size, max_entries

- map takes care of allocating/freeing key/value pairs

- map_update_elem() must fail to insert new element when max_entries
  limit is reached to make sure that eBPF programs cannot exhaust memory

- map_update_elem() replaces elements in an atomic way

- optimized for speed of lookup() which can be called multiple times from
  eBPF program which itself is triggered by high volume of events
  . in the future JIT compiler may recognize lookup() call and optimize it
    further, since key_size is constant for life of eBPF program
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0f8e4bd8
    • A
      bpf: add 'flags' attribute to BPF_MAP_UPDATE_ELEM command · 3274f520
      由 Alexei Starovoitov 提交于 
      the current meaning of BPF_MAP_UPDATE_ELEM syscall command is:
either update existing map element or create a new one.
Initially the plan was to add a new command to handle the case of
'create new element if it didn't exist', but 'flags' style looks
cleaner and overall diff is much smaller (more code reused), so add 'flags'
attribute to BPF_MAP_UPDATE_ELEM command with the following meaning:
 #define BPF_ANY	0 /* create new element or update existing */
 #define BPF_NOEXIST	1 /* create new element if it didn't exist */
 #define BPF_EXIST	2 /* update existing element */

bpf_update_elem(fd, key, value, BPF_NOEXIST) call can fail with EEXIST
if element already exists.

bpf_update_elem(fd, key, value, BPF_EXIST) can fail with ENOENT
if element doesn't exist.

Userspace will call it as:
int bpf_update_elem(int fd, void *key, void *value, __u64 flags)
{
    union bpf_attr attr = {
        .map_fd = fd,
        .key = ptr_to_u64(key),
        .value = ptr_to_u64(value),
        .flags = flags;
    };

    return bpf(BPF_MAP_UPDATE_ELEM, &attr, sizeof(attr));
}

First two bits of 'flags' are used to encode style of bpf_update_elem() command.
Bits 2-63 are reserved for future use.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3274f520
  9. 11 11月, 2014 1 次提交
  11. 10 11月, 2014 5 次提交
  13. 09 11月, 2014 1 次提交
  15. 08 11月, 2014 2 次提交
  17. 06 11月, 2014 4 次提交
  19. 04 11月, 2014 1 次提交
    • R
      cfg80211: 802.11p OCB mode handling · 6e0bd6c3
      由 Rostislav Lisovy 提交于 
      This patch adds new iface type (NL80211_IFTYPE_OCB) representing
the OCB (Outside the Context of a BSS) mode.
When establishing a connection to the network a cfg80211_join_ocb
function is called (particular nl80211_command is added as well).
A mandatory parameters during the ocb_join operation are 'center
frequency' and 'channel width (5/10 MHz)'.

Changes done in mac80211 are minimal possible required to avoid
many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB'
not handled in switch) during compilation. Full functionality
(where needed) is added in the following patch.
Signed-off-by: NRostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
      6e0bd6c3