- 13 4月, 2012 6 次提交
-
-
由 Dave Jones 提交于
49b25e05 introduced a use-after-free bug that caused spurious -EIO's to be returned. Do the check before we free the transaction. Cc: David Sterba <dsterba@suse.cz> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
bio_alloc() has the possibility of returning NULL. So, it is necessary to check the return value. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Ilya Dryomov 提交于
This fixes a regression introduced by fc67c450. spin_is_locked() always returns 0 on UP kernels, which caused assert in get_restripe_target() to be fired on every call from btrfs_reduce_alloc_profile() on UP systems. Remove it completely for now, it's not clear if it's going to be needed in future. Reported-by: NBobby Powers <bobbypowers@gmail.com> Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org> Tested-by: NMitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
We miscalculate the length of extents we're discarding, and it leads to an eof of device. Reported-by: NDaniel Blueman <daniel@quora.org> Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
We'd have to be passing bogus extent buffers for this uninit variable to actually be used, but set it to zero just in case. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This reverts commit 5500cdbe. We've had a number of complaints of early enospc that bisect down to this patch. We'll hae to fix the reservations differently. CC: stable@kernel.org Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 3月, 2012 1 次提交
-
-
由 Chris Mason 提交于
Dave Sterba had put in patches to look for mixed data/metadata groups with metadata bigger than 4KB. But these ended up in the wrong place and it wasn't testing the feature flag correctly. This updates the tests to make sure our sizes are matching Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 3月, 2012 15 次提交
-
-
由 Liu Bo 提交于
When we use autodefrag, we forget to update the index which indicates the last page we've dirty. And we'll set dirty flags on a same set of pages again and again. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
$ mkfs.btrfs /dev/sdb7 $ mount /dev/sdb7 /mnt/btrfs/ -oautodefrag $ dd if=/dev/zero of=/mnt/btrfs/foobar bs=4k count=10 oflag=direct 2>/dev/null $ filefrag -v /mnt/btrfs/foobar Filesystem type is: 9123683e File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096) ext logical physical expected length flags 0 0 3072 10 eof /mnt/btrfs/foobar: 1 extent found Now we have a big real extent [0, 40960), but autodefrag will still defrag it. $ sync $ filefrag -v /mnt/btrfs/foobar Filesystem type is: 9123683e File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096) ext logical physical expected length flags 0 0 3082 10 eof /mnt/btrfs/foobar: 1 extent found So if we already find a big real extent, we're ok about that, just skip it. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
If our file's layout is as follows: | hole | data1 | hole | data2 | we do not need to defrag this file, because this file has holes and cannot be merged into one extent. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
$ mkfs.btrfs disk $ mount disk /mnt -o autodefrag $ dd if=/dev/zero of=/mnt/foobar bs=4k count=10 2>/dev/null && sync $ for i in `seq 9 -2 0`; do dd if=/dev/zero of=/mnt/foobar bs=4k count=1 \ seek=$i conv=notrunc 2> /dev/null; done && sync then we'll get to defrag "foobar" again and again. So does option "-o autodefrag,compress". Reasons: When the cleaner kthread gets to fetch inodes from the defrag tree and defrag them, it will dirty pages and submit them, this will comes to another DATA COW where the processing inode will be inserted to the defrag tree again. This patch sets a rule for COW code, i.e. insert an inode when we're really going to make some defragments. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
commit 600a45e1 (Btrfs: fix deadlock on page lock when doing auto-defragment) fixes the deadlock on page, but it also introduces another bug. A page may have been truncated after unlock & lock. So we need to find it again to get the right one. And since we've held i_mutex lock, inode size remains unchanged and we can drop isize overflow checks. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
The bug is from running xfstests 209 with autodefrag. The race is as follows: t1 t2(autodefrag) direct IO invalidate pagecache dio(old data) add_inode_defrag invalidate pagecache endio direct IO invalidate pagecache run_defrag readpage(old data) set page dirty (old data) dio(new data, rewrite) invalidate pagecache (*) endio t2(autodefrag) will get old data into pagecache via readpage and set pagecache dirty. Meanwhile, invalidate pagecache(*) will fail due to dirty flags in pages. So the old data may be flushed into disk by flush thread, which will lead to data loss. And so does the case of user defragment progs. The patch fixes this race by holding i_mutex when we readpage and set page dirty. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
This deadlock comes from xfstests 251. We'll hold the chunk_mutex throughout the whole of a chunk allocation. But if we find that we've used up system chunk space, we need to allocate a new system chunk, but this will lead to a recursion of chunk allocation and end up with a deadlock on chunk_mutex. So instead we need to allocate the system chunk first if we find we're in ENOSPC. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
o For space info, the type of space info is useful for debug. o For transaction handle, its transid is useful. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
With the big metadata blocks, we can have crc items that are much bigger than a page. There are a few places that we try to kmalloc memory to hold the items during a split. Items bigger than 4KB don't really have a huge benefit in efficiency, but they do trigger larger order allocations. This commits changes the csums to make sure they stay under 4KB. This is not a format change, just a #define to limit huge items. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Btrfs puts the filesystem metadata into its own address space, and somehow the block device address space isn't getting onto disk properly before a mount. The end result is that a loop of mkfs and mounting the filesystem will sometimes find stale or incorrect data. This commit should fix it by sprinkling fdatawrites and invalidate_bdev calls around. This is a short term measure to make sure it is fixed. The block devices really should be flushed and cleaned up higher in the stack. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.jan-o-sch.net/btrfs-unstable由 Chris Mason 提交于
Conflicts: fs/btrfs/transaction.c Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
-
由 Chris Mason 提交于
Conflicts: fs/btrfs/ctree.c fs/btrfs/disk-io.c fs/btrfs/extent-tree.c fs/btrfs/extent_io.c fs/btrfs/extent_io.h fs/btrfs/inode.c fs/btrfs/scrub.c Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 David Sterba 提交于
With support for bigger metadata blocks, we must avoid mounting a filesystem with different block size for mixed block groups, this causes corruption (found by xfstests/083). Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 David Sterba 提交于
Validate checksum algorithm during mount and prevent BUG_ON later in btrfs_super_csum_size. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
- 28 3月, 2012 3 次提交
-
-
由 Stefan Behrens 提交于
Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Stefan Behrens 提交于
Just a minor cleanup commit in preparation for the big block changes. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Stefan Behrens 提交于
Readahead already has a define for the max number of mirrors. Scrub needs such a define now, the rest of the code will need something like this soon. Therefore the define was added to ctree.h and removed from the readahead code. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 27 3月, 2012 15 次提交
-
-
由 Ilya Dryomov 提交于
If relocate of block group 0 fails with ENOSPC we end up infinitely looping because key.offset -= 1 statement in that case brings us back to where we started. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
init_ipath() allocates btrfs_data_container which is never freed. Free it in free_ipath() and nuke the comment for init_data_container() - we can safely free it with kfree(). Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Generally we don't allow dup for data, but mixed chunks are special and people seem to think this has its use cases. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Do not run sanity checks on all target profiles unless they all will be used. This came up because alloc_profile_is_valid() is now more strict than it used to be. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Currently if we don't have enough space allocated we go ahead and loop though devices in the hopes of finding enough space for a chunk of the *same* type as the one we are trying to relocate. The problem with that is that if we are trying to restripe the chunk its target type can be more relaxed than the current one (eg require less devices or less space). So, when restriping, run checks against the target profile instead of the current one. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Add __get_block_group_index() helper to be able to derive block group index from an arbitary set of flags. Implement get_block_group_index() in terms of it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Add get_restripe_target() helper and switch everybody to use it. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Header file is not a good place to define functions. This also moves a call to alloc_profile_is_valid() down the stack and removes a redundant check from __btrfs_alloc_chunk() - alloc_profile_is_valid() takes it into account. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
"0" is a valid value for an on-disk chunk profile, but it is not a valid extended profile. (We have a separate bit for single chunks in extended case) Also rename it to alloc_profile_is_valid() for clarity. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Add functions to abstract the conversion between chunk and extended allocation profile formats and switch everybody to use them. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
This has been causing a lot of confusion for quite a while now and a lot of users were surprised by this (some of them were even stuck in a ENOSPC situation which they couldn't easily get out of). The addition of restriper gives users a clear choice between raid0 and drive concat setup so there's absolutely no excuse for us to keep doing this. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Jan Schmidt 提交于
In commit 4692cf58 we introduced new backref walking code for btrfs. This assumes we're searching live roots, which requires a transaction context. While scrubbing, however, we must not join a transaction because this could deadlock with the commit path. Additionally, what scrub really wants to do is resolving a logical address in the commit root it's currently checking. This patch adds support for logical to path resolving on commit roots and makes scrub use that. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
由 Jan Schmidt 提交于
The two helper functions commit_cowonly_roots() and create_pending_snapshot() failed to check the return value from btrfs_cow_block(), which could at least in theory fail with -ENOSPC from btrfs_alloc_free_block(). This commit adds the missing checks. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
由 Jan Schmidt 提交于
btrfs_init_lockdep only makes our lockdep class names look prettier, thus it did never hurt we forgot to actually call it. This turns our lockdep identifier strings from lockdep auto-set #[id] into really pretty "btrfs-fs-01" or "btrfs-csum-03". Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
由 Josef Bacik 提交于
Since we need to read and write extent buffers in their entirety we can't use the normal bio_readpage_error stuff since it only works on a per page basis. So instead make it so that if we see an io error in endio we just mark the eb as having an IO error and then in btree_read_extent_buffer_pages we will manually try other mirrors and then overwrite the bad mirror if we find a good copy. This works with larger than page size blocks. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-