- 10 2月, 2014 19 次提交
-
-
由 Christian Engelmayer 提交于
Remove unused network device private data pointer 'vp' in function vortex_eisa_cleanup(). Detected by Coverity: CID 139826. Signed-off-by: NChristian Engelmayer <cengelma@gmx.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
ip rules with iif/oif references do not update: (detach/attach) across interface renames. Signed-off-by: NMaciej Żenczykowski <maze@google.com> CC: Willem de Bruijn <willemb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Chris Davis <chrismd@google.com> CC: Carlo Contavalli <ccontavalli@google.com> Google-Bug-Id: 12936021 Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Engelmayer 提交于
Remove occurrences of unused pointer to network device private data in functions dlci_header() and dlci_receive(). Detected by Coverity: CID 139844, CID 139845. Signed-off-by: NChristian Engelmayer <cengelma@gmx.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Engelmayer 提交于
Commit 8df8c56a (6lowpan: Moving generic compression code into 6lowpan_iphc.c) left pointer 'hdr' unused - remove it. Detected by Coverity: CID 1164868. Signed-off-by: NChristian Engelmayer <cengelma@gmx.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 FX Le Bail 提交于
The patch 446fab59 ("ipv6: enable anycast addresses as source addresses in ICMPv6 error messages") causes an Oops when pinging a not set up IPv6 peer on a sit tunnel. The problem is that ipv6_anycast_destination() uses unconditionally skb_dst(skb), which is NULL in this case. The solution is to use instead the ipv6_chk_acast_addr_src() function. Here are the steps to reproduce it: modprobe sit ip link add sit1 type sit remote 10.16.0.121 local 10.16.0.249 ip l s sit1 up ip -6 a a dev sit1 2001:1234::123 remote 2001:1234::121 ping6 2001:1234::121 Reported-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NFrancois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Mark functions as static in net/sunrpc/svc_xprt.c because they are not used outside this file. This eliminates the following warning in net/sunrpc/svc_xprt.c: net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes] net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes] net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Include appropriate header file net/netfilter/nf_tables_core.h in net/netfilter/nft_lookup.c because it has prototype declaration of functions defined in net/netfilter/nft_lookup.c. This eliminates the following warning in net/netfilter/nft_lookup.c: net/netfilter/nft_lookup.c:133:12: warning: no previous prototype for ‘nft_lookup_module_init’ [-Wmissing-prototypes] net/netfilter/nft_lookup.c:138:6: warning: no previous prototype for ‘nft_lookup_module_exit’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Move prototype declaration of function to header file include/net/net_namespace.h from net/ipx/af_ipx.c because they are used by more than one file. This eliminates the following warning in net/ipx/sysctl_net_ipx.c: net/ipx/sysctl_net_ipx.c:33:6: warning: no previous prototype for ‘ipx_register_sysctl’ [-Wmissing-prototypes] net/ipx/sysctl_net_ipx.c:38:6: warning: no previous prototype for ‘ipx_unregister_sysctl’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Move prototype declarations of function to header file include/net/datalink.h from net/ipx/af_ipx.c because they are used by more than one file. This eliminates the following warning in net/ipx/pe2.c: net/ipx/pe2.c:20:24: warning: no previous prototype for ‘make_EII_client’ [-Wmissing-prototypes] net/ipx/pe2.c:32:6: warning: no previous prototype for ‘destroy_EII_client’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Move prototype declaration of functions to header file include/net/ipx.h from net/ipx/af_ipx.c because they are used by more than one file. This eliminates the following warning in net/ipx/ipx_route.c:33:19: warning: no previous prototype for ‘ipxrtr_lookup’ [-Wmissing-prototypes] net/ipx/ipx_route.c:52:5: warning: no previous prototype for ‘ipxrtr_add_route’ [-Wmissing-prototypes] net/ipx/ipx_route.c:94:6: warning: no previous prototype for ‘ipxrtr_del_routes’ [-Wmissing-prototypes] net/ipx/ipx_route.c:149:5: warning: no previous prototype for ‘ipxrtr_route_skb’ [-Wmissing-prototypes] net/ipx/ipx_route.c:171:5: warning: no previous prototype for ‘ipxrtr_route_packet’ [-Wmissing-prototypes] net/ipx/ipx_route.c:261:5: warning: no previous prototype for ‘ipxrtr_ioctl’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Move prototype definition of function to header file include/net/ipx.h from net/ipx/ipx_route.c because they are used by more than one file. This eliminates the following warning from net/ipx/af_ipx.c: net/ipx/af_ipx.c:193:23: warning: no previous prototype for ‘ipxitf_find_using_net’ [-Wmissing-prototypes] net/ipx/af_ipx.c:577:5: warning: no previous prototype for ‘ipxitf_send’ [-Wmissing-prototypes] net/ipx/af_ipx.c:1219:8: warning: no previous prototype for ‘ipx_cksum’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Move prototype declaration of functions to header file include/net/dn.h from net/decnet/af_decnet.c because they are used by more than one file. This eliminates the following warning in net/decnet/af_decnet.c: net/decnet/sysctl_net_decnet.c:354:6: warning: no previous prototype for ‘dn_register_sysctl’ [-Wmissing-prototypes] net/decnet/sysctl_net_decnet.c:359:6: warning: no previous prototype for ‘dn_unregister_sysctl’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Move prototype declaration of functions to header file include/net/dn_route.h from net/decnet/af_decnet.c because it is used by more than one file. This eliminates the following warning in net/decnet/dn_route.c: net/decnet/dn_route.c:629:5: warning: no previous prototype for ‘dn_route_rcv’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Mark functions as static in core/dev.c because they are not used outside this file. This eliminates the following warning in core/dev.c: net/core/dev.c:2806:5: warning: no previous prototype for ‘__dev_queue_xmit’ [-Wmissing-prototypes] net/core/dev.c:4640:5: warning: no previous prototype for ‘netdev_adjacent_sysfs_add’ [-Wmissing-prototypes] net/core/dev.c:4650:6: warning: no previous prototype for ‘netdev_adjacent_sysfs_del’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Reviewed-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Include appropriate header file net/caif/caif_dev.h in caif/cfsrvl.c because it has prototype declaration of functions defined in caif/cfsrvl.c. This eliminates the following warning in caif/cfsrvl.c: net/caif/cfsrvl.c:198:6: warning: no previous prototype for ‘caif_free_client’ [-Wmissing-prototypes] net/caif/cfsrvl.c:208:6: warning: no previous prototype for ‘caif_client_register_refcnt’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Include appropriate header file net/caif/caif_dev.h in caif/caif_dev.c because it has prototype declarations of function defined in caif/caif_dev.c. This eliminates the following file in caif/caif_dev.c: net/caif/caif_dev.c:303:6: warning: no previous prototype for ‘caif_enroll_dev’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Mark function as static in net/9p/client.c because it is not used outside this file. This eliminates the following warning in net/9p/client.c: net/9p/client.c:207:18: warning: no previous prototype for ‘p9_fcall_alloc’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== Please pull this batch of fixes intended for the 3.14 stream! For the mac80211 bits, Johannes says: "This is just a collection of small fixes, the commit logs explain the details. The only thing that isn't strictly a fix is the 5/10 MHz enabling, I had forgotten this and there's little point in waiting longer. The patch simply removes the force-disable code that I put in when there was a problem with the userspace API (that has long been fixed.)" For the iwlwifi bits, Emmanuel says: "I have an important fix that disables A band in case the driver thought it was enabled, and the firmware disagreed. We ended up making the firmware unhappy. I also fix the station table in AP mode and fix the scan while we have BT working. Johannes removes a static variable that could potentially lead to to issues on multi-device setups and disables scheduled scan to avoid issues with old versions of wpa_supplicant. A small fix from David on scan and a few new device IDs for 7265." On top of that... Oleksij Rempel adds a USB ID to the ar5523 driver and changes the default powersave setting for ath9k_htc to "off", due to observed stability issues (based on an equivalent ath9k patch). Stanislaw Gruszka similarly disables powersave for a couple of rt2x00 drivers. He also fixes a couple of scheduling while atomic issues in ath9k_htc. Sujith Manoharan rounds-out the powersave disables with one for ath9k. He also fixes a build prolem with ath9k on ARM and fixes an ath9k Tx power calculation. Finally, Andrea Merello fixes a couple of lingering DMA mapping problems in the rtl8180 driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter/nftables/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes, mostly nftables fixes, most relevantly they are: * Fix a crash in the h323 conntrack NAT helper due to expectation list corruption, from Alexey Dobriyan. * A couple of RCU race fixes for conntrack, one manifests by hitting BUG_ON in nf_nat_setup_info() and the destroy path, patches from Andrey Vagin and me. * Dump direction attribute in nft_ct only if it is set, from Arturo Borrero. * Fix IPVS bug in its own connection tracking system that may lead to copying only 4 bytes of the IPv6 address when initializing the ip_vs_conn object, from Michal Kubecek. * Fix -EBUSY errors in nftables when deleting the rules, chain and tables in a row due mixture of asynchronous and synchronous object releasing, from me. * Three fixes for the nf_tables set infrastructure when using intervals and mappings, from me. * Four patches to fixing the nf_tables log, reject and ct expressions from the new inet table, from Patrick McHardy. * Fix memory overrun in the map that is used to dynamically allocate names from anonymous sets, also from Patrick. * Fix a potential oops if you dump a set with NFPROTO_UNSPEC and a table name, from Patrick McHardy. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 2月, 2014 3 次提交
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
由 Patrick McHardy 提交于
It makes no sense to inline a rarely used function meant for debugging only that is called a total of five times in the main evaluation loop. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Fix access to uninitialized data for end interval elements. The element data part is uninitialized in interval end elements. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 07 2月, 2014 18 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch fixes several things which related to the handling of end interval elements: * Chain use underflow with intervals and map: If you add a rule using intervals+map that introduces a loop, the error path of the rbtree set decrements the chain refcount for each side of the interval, leading to a chain use counter underflow. * Don't copy the data part of the end interval element since, this area is uninitialized and this confuses the loop detection code. * Don't allocate room for the data part of end interval elements since this is unused. So, after this patch the idea is that end interval elements don't have a data part. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NPatrick McHardy <kaber@trash.net>
-
由 Pablo Neira Ayuso 提交于
This combination is not allowed since end interval elements cannot contain data. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NPatrick McHardy <kaber@trash.net>
-
由 Eric Dumazet 提交于
TCP pacing depends on an accurate srtt estimation. Current srtt estimation is using jiffie resolution, and has an artificial offset of at least 1 ms, which can produce slowdowns when FQ/pacing is used, especially in DC world, where typical rtt is below 1 ms. We are planning a switch to usec resolution for linux-3.15, but in the meantime, this patch removes the 1 ms offset. All we need is to have tp->srtt minimal value of 1 to differentiate the case of srtt being initialized or not, not 8. The problematic behavior was observed on a 40Gbit testbed, where 32 concurrent netperf were reaching 12Gbps of aggregate speed, instead of line speed. This patch also has the effect of reporting more accurate srtt and send rates to iproute2 ss command as in : $ ss -i dst cca2 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port tcp ESTAB 0 0 10.244.129.1:56984 10.244.129.2:12865 cubic wscale:6,6 rto:200 rtt:0.25/0.25 ato:40 mss:1448 cwnd:10 send 463.4Mbps rcv_rtt:1 rcv_space:29200 tcp ESTAB 0 390960 10.244.129.1:60247 10.244.129.2:50204 cubic wscale:6,6 rto:200 rtt:0.875/0.75 mss:1448 cwnd:73 ssthresh:51 send 966.4Mbps unacked:73 retrans:0/121 rcv_space:29200 Reported-by: NVytautas Valancius <valas@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
Commit 93d8bf9f ("bridge: cleanup netpoll code") introduced a check in br_netpoll_enable(), but this check is incorrect for br_netpoll_setup(). This patch moves the code after the check into __br_netpoll_enable() and calls it in br_netpoll_setup(). For br_add_if(), the check is still needed. Fixes: 93d8bf9f ("bridge: cleanup netpoll code") Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Tested-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
sock_alloc_send_pskb() & sk_page_frag_refill() have a loop trying high order allocations to prepare skb with low number of fragments as this increases performance. Problem is that under memory pressure/fragmentation, this can trigger OOM while the intent was only to try the high order allocations, then fallback to order-0 allocations. We had various reports from unexpected regressions. According to David, setting __GFP_NORETRY should be fine, as the asynchronous compaction is still enabled, and this will prevent OOM from kicking as in : CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0, oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled CFSClientEventm Call Trace: [<ffffffff8043766c>] dump_header+0xe1/0x23e [<ffffffff80437a02>] oom_kill_process+0x6a/0x323 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Currently, to make netconsole start over IPv6, the source address needs to be specified. Without a source address, netpoll_parse_options assumes we're setting up over IPv4 and the destination IPv6 address is rejected. Check if the IP version has been forced by a source address before checking for a version mismatch when parsing the destination address. Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Gortmaker 提交于
Commit ee45fd92 ("sfc: Use TX PIO for sufficiently small packets") introduced the following warning: drivers/net/ethernet/sfc/tx.c: In function 'efx_enqueue_skb': drivers/net/ethernet/sfc/tx.c:432:1: warning: label 'finish_packet' defined but not used Stick the label inside the same #ifdef that the code which calls it uses. Note that this is only seen for arch that do not set ARCH_HAS_IOREMAP_WC, such as arm, mips, sparc, ..., as the others enable the write combining code and hence use the label. Cc: Jon Cooper <jcooper@solarflare.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
It seems like this function was intended to have special handling for urb statuses of -ENOENT and -ECONNRESET. But now it just prints some debugging and returns at the start of the function. I have removed the dead code, it's still in the git history if anyone wants to revive it. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Moskyto Matejka 提交于
Commit cfd280c9 ("net: sync some IP headers with glibc") changed a set of define's to an enum (with no explanation why) which introduced a bug in module mip6 where aliases are generated using the IPPROTO_* defines; mip6 doesn't load if require_module called with the aliases from xfrm_get_type(). Reverting this change back to define's to fix the aliases. modinfo mip6 (before this change) alias: xfrm-type-10-IPPROTO_DSTOPTS alias: xfrm-type-10-IPPROTO_ROUTING modinfo mip6 (after this change) alias: xfrm-type-10-43 alias: xfrm-type-10-60 Signed-off-by: NJan Moskyto Matejka <mq@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This is a static checker fix, but judging from the context then I think hexidecimal 0x80 is intended here instead of decimal 80. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matija Glavinic Pecotic 提交于
commit efe4208f: 'ipv6: make lookups simpler and faster' broke initialization of local source address on accepted ipv6 sockets. Before the mentioned commit receive address was copied along with the contents of ipv6_pinfo in sctp_v6_create_accept_sk. Now when it is moved, it has to be copied separately. This also fixes lksctp's ipv6 regression in a sense that test_getname_v6, TC5 - 'getsockname on a connected server socket' now passes. Signed-off-by: NMatija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The submission of the interrupt transfer should be done after setting the bit of WORK_ENABLE, otherwise the callback function would have the opportunity to be returned directly. Clear the bit of WORK_ENABLE before killing the interrupt transfer. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
bnx2x driver uses incorrect PF identifier to configure (in HW) the VF interrupt scheme; As a result, in multi-function mode the configuration for PFs with a high index (4+) will overflow and the PF will erroneously configure a single ISR scheme for its VFs. As a result, if such a VF uses multiple queues, interrupt generation will stop after VF receives an Rx packet or sends a Tx packet on a queue other than queue[0]. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
Quoting David Vrabel - "5780 cards cannot have jumbo frames and TSO enabled together. When jumbo frames are enabled by setting the MTU, the TSO feature must be cleared. This is done indirectly by calling netdev_update_features() which will call tg3_fix_features() to actually clear the flags. netdev_update_features() will also trigger a new netlink message for the feature change event which will result in a call to tg3_get_stats64() which deadlocks on the tg3 lock." tg3_set_mtu() does not need to be under the tg3 lock since converting the flags to use set_bit(). Move it out to after tg3_netif_stop(). Reported-by: NDavid Vrabel <david.vrabel@citrix.com> Tested-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
In the original code, if tg3_readphy() fails then it does an unnecessary check to verify "err" is still zero and then returns -EBUSY. My static checker complains about the unnecessary "if (!err)" check and anyway it is better to propagate the -EBUSY error code from tg3_readphy() instead of hard coding it here. And really the original code is confusing to look at. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
On m68k/ARAnyM: WARNING: CPU: 0 PID: 407 at net/ipv4/devinet.c:1599 0x316a99() Modules linked in: CPU: 0 PID: 407 Comm: ifconfig Not tainted 3.13.0-atari-09263-g0c71d68014d1 #1378 Stack from 10c4fdf0: 10c4fdf0 002ffabb 000243e8 00000000 008ced6c 00024416 00316a99 0000063f 00316a99 00000009 00000000 002501b4 00316a99 0000063f c0a86117 00000080 c0a86117 00ad0c90 00250a5a 00000014 00ad0c90 00000000 00000000 00000001 00b02dd0 00356594 00000000 00356594 c0a86117 eff6c9e4 008ced6c 00000002 008ced60 0024f9b4 00250b52 00ad0c90 00000000 00000000 00252390 00ad0c90 eff6c9e4 0000004f 00000000 00000000 eff6c9e4 8000e25c eff6c9e4 80001020 Call Trace: [<000243e8>] warn_slowpath_common+0x52/0x6c [<00024416>] warn_slowpath_null+0x14/0x1a [<002501b4>] rtmsg_ifa+0xdc/0xf0 [<00250a5a>] __inet_insert_ifa+0xd6/0x1c2 [<0024f9b4>] inet_abc_len+0x0/0x42 [<00250b52>] inet_insert_ifa+0xc/0x12 [<00252390>] devinet_ioctl+0x2ae/0x5d6 Adding some debugging code reveals that net_fill_ifaddr() fails in put_cacheinfo(skb, ifa->ifa_cstamp, ifa->ifa_tstamp, preferred, valid)) nla_put complains: lib/nlattr.c:454: skb_tailroom(skb) = 12, nla_total_size(attrlen) = 20 Apparently commit 5c766d64 ("ipv4: introduce address lifetime") forgot to take into account the addition of struct ifa_cacheinfo in inet_nlmsg_size(). Hence add it, like is already done for ipv6. Suggested-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James M Leddy 提交于
Occasionally users want to know what parameters their Broadcom drivers are running with. For example, a user may want to know if MSI is disabled. This patch has been compile tested. Signed-off-by: NJames M Leddy <james.leddy@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Shiyan 提交于
This patch removes old and unsupported CLPS711X IrDA driver. Support for IrDA for CLPS711X serial port now provided by commit 4a33f1f59abd (serial: clps711x: Add support for N_IRDA line discipline), so IrDA-mode can be turned ON with "irattach" tool through "irtty" driver. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-