Many SoC needs each PORT_GP_x() macros, but we can share/reuse
same one.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

This header file will be removed soon.

Copy the helper macro RCAR_GP_PIN(), which is used by the pinctrl
drivers only, to sh_pfc.h, and drop the #include.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

The sh_pfc_soc_info.gpio_data[] array contains not only GPIO data, but
also various other pinmux-related data (functions and marks).
Every single driver already calls its local array pinmux_data[].
Hence rename the sh_pfc_soc_info member to "pinmux_data".
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Add VIN0/1 pin groups to R8A7794 PFC driver.

Sergei:  rebased, renamed, added changelog, gathered 12  VIN1 data pins into
a single pin group, added "vin1_data10" pin group, used 'union vin_data' and
VIN_DATA_PIN_GROUP() macro to describe VIN1 pins, reversed the order of  the
VIN1 pin groups, removed unneeded empty lines, fixed  VIN1 separator comment.
Signed-off-by: NKoji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same.

Current PFC driver is very difficult to read, because macro names are
using different length.

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
	PINMUX_IPSR_MODSEL_DATA(ipsr, ...)

It can be readable if we can use PINMUX_IPSR_MSEL() instead
of PINMUX_IPSR_MODSEL_DATA()

	PINMUX_IPSR_NOGP(ispr, ...)
	PINMUX_IPSR_DATA(ipsr, ...)
	PINMUX_IPSR_NOGM(ispr, ...)
	PINMUX_IPSR_NOFN(ipsr, ...)
	PINMUX_IPSR_MSEL(ipsr, ...)
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

SCIF0 on R-Car E2 does not have an SCK pin.

"SCIF_CLK" is the (H)SCIF baud rate generation clock pin, which is not
yet supported.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

Add USB0/1 pin groups to R8A7794 PFC driver.
Signed-off-by: NShinobu Uehara <shinobu.uehara.xc@renesas.com>
[Sergei: rebased, renamed, added changelog.]
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add SDHI0/1/2 pin groups to R8A7794 PFC driver.
Signed-off-by: NShinobu Uehara <shinobu.uehara.xc@renesas.com>
[Sergei: renamed SD data pins to match the driver, rebased, renamed, added
changelog.]
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add MMCIF pin groups to R8A7794 PFC driver.
Signed-off-by: NShinobu Uehara <shinobu.uehara.xc@renesas.com>
[Sergei: rebased, renamed, added changelog.]
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add PFC support for  the  R8A7794 SoC  including pin groups for some
on-chip devices such as ETH, I2C, INTC, MSIOF, QSPI, [H]SCIF...

Sergei: squashed together several patches, fixed the MLB_CLK typo,
added IRQ4.. IRQ9 pin groups, fixed IRQn comments, added ETH B pin
group names, removed stray new line and fixed typos in the  comments
in the pinmux_config_regs[] initializer, removed the platform device
ID, took into account limited number of signals in the GPIO1/5/6
controllers, added reasonable and removed unreasonable
copyrights, modified the bindings document, renamed, added changelog.

Changes in version 5:
- resolved rejects, refreshed the patch;
- added Laurent Pinchart's ACK.

Changes in version 4:
- reused the PORT_GP_26() macro to #define PORT_GP_28().

Changes in version 3:
- removed the platform device ID;
- added PORT_GP_26() and PORT_GP_28() macros, used them for GPIO1/5/6 in the
  CPU_ALL_PORT() macro.

Changes in version 2:
- rebased the patch.
Signed-off-by: NHisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>