Add missing inner RSS support capability as part of
the RSS supported fields.

In addition change MLX5_RX_HASH_INNER to 1UL << 31 in
order to define it as unsigned.

Fixes: 309fa347 ("IB/mlx5: Add support for RSS on the inner packet")
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Support RSS hash for inner headers according to a new flag,
MLX4_IB_RX_HASH_INNER provided by the vendor channel.

In case the flag is set, RSS hash will be done on the inner headers of
VXLAN packets (which are encapsulated).
Non-encapsulated packets will be hashed according to the outer headers.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Patches for 4.16 that are dependent on patches sent to 4.15-rc.

These are small clean ups for the vmw_pvrdma and i40iw drivers.

* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
  RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
  RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
  RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
  RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
  RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
  i40iw: Change accelerated flag to bool

BIT() should not be used in the UAPI header. Remove it.
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

refcount_t is the preferred type for refcounts. Change the
QP and CQ refcnt fields to use refcount_t.
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NAditya Sarwade <asarwade@vmware.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Convert the sizeof(void *) in two kcalloc calls to be more
specific for the arrays that are being allocated.
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NAditya Sarwade <asarwade@vmware.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Be more consistent in setting and checking is_kernel
flag for QPs and CQs.
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NAditya Sarwade <asarwade@vmware.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Support for SRQs were added in the vmw_pvrdma userlevel library
before two necessary macros were added into the kernel ABI header
file. Add the two UAR SRQ macros that are required by the userlevel
library so that the library can rely on the kernel ABI header file
for these SRQ macro definitions.

Fixes: 8b10ba78 ("RDMA/vmw_pvrdma: Add shared receive queue support")
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NAditya Sarwade <asarwade@vmware.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The accelerated flag only utilizes two values: 0 and 1.
Modify accelerated flag in struct i40iw_cm_node to bool.
Signed-off-by: NHenry Orosco <henry.orosco@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Delete ibnl_chk_listeners() and its kernel-doc comments from the
core_priv.h header file.  There is no such function.

Fixes: 233c1955 ("RDMA/netlink: Reduce exposure of RDMA netlink functions")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The rq/sq->psn is 24 bits as defined in the IB spec, therefore we mask
out the 8 most significant bits to avoid overflow in modify_qp.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ibmr.device is being set only after ib_alloc_mr() is
(successfully) complete. Therefore, in case mlx5_core_create_mkey()
return with error, the error flow calls mlx5_free_priv_descs()
which uses ibmr.device (which doesn't exist yet), causing
a NULL dereference oops.

To fix this, the IB device should be set in the mr struct earlier
stage (e.g. prior to calling mlx5_core_create_mkey()).

Fixes: 8a187ee5 ("IB/mlx5: Support the new memory registration API")
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NNitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The XRC target QP create flow sets up qp_sec only if there is an IB link with
LSM security enabled. However, several other related uAPI entry points blindly
follow the qp_sec NULL pointer, resulting in a possible oops.

Check for NULL before using qp_sec.

Cc: <stable@vger.kernel.org> # v4.12
Fixes: d291f1a6 ("IB/core: Enforce PKey security on QPs")
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If the input command length is larger than the kernel supports an error should
be returned in case the unsupported bytes are not cleared, instead of the
other way aroudn. This matches what all other callers of ib_is_udata_cleared
do and will avoid user ABI problems in the future.

Cc: <stable@vger.kernel.org> # v4.10
Fixes: 189aba99 ("IB/uverbs: Extend modify_qp and support packet pacing")
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

User-space applications can do mmap and munmap directly at
any time.

Since the VMA list is not protected with a mutex, concurrent
accesses to the VMA list from the mmap and munmap can cause
data corruption. Add a mutex around the list.

Cc: <stable@vger.kernel.org> # v4.7
Fixes: 7c2344c3 ("IB/mlx5: Implements disassociate_ucontext API")
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Change the slid arg to ingress_pkey_table_fail() to a full
32Bits and do not convert to 16Bits in caller. This is so we
can keep everything 32bit in the kernel and only change to
16bit at the uapi boundary.
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use rdma_cap_opa_mad() to check for OPA to promote code reuse.
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The accepting QP ORD value should be adjusted not to
exceed the peer QP IRD value (RFC 6581). This is
skipped for loopback. After the ORD is validated
by i40iw_record_ird_ord(), adjust the ORD value of
the loopback accepting QP to prevent overrunning the
IRD space of the peer QP. Also move the ORD accounting
for 0-byte RDMA read to i40iw_record_ird_ord().

Fixes: f27b4746 ("i40iw: add connection management code")
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Casting to u16 before validating IRD/ORD connection
parameters could cause recording wrong IRD/ORD values
in the cm_node. Validate the IRD/ORD parameters as
they are passed by the application before recording
them.

Fixes: f27b4746 ("i40iw: add connection management code")
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The LLP_DOUBT_REACHABILITY Asynchronous Event (AE) is an early
warning of a connection issue. It is followed by LLP_TOO_MANY_RETRIES
AE, if the retransmit threshold is reached and recovery is not possible
for the connection.

Currently we terminate the connection on receiving the
LLP_DOUBT_REACHABILITY AE. Ignore this AE and
terminate the connection only on LLP_TOO_MANY_RETRIES AE.

This improves the user experience on cable disconnect/reconnect
scenario while running iWARP traffic. On cable disconnect,
the QP traffic is paused and the user has a larger and more
reasonable timeout within which if the cable is reconnected,
traffic can continue.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Partial FPDU processing is broken as the sequence number
for the first partial FPDU is wrong due to incorrect
Q2 buffer offset. The offset should be 64 rather than 16.

Fixes: 786c6adb ("i40iw: add puda code")
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

On IP address change event, all connected QPs are torn down
irrespective of whether IP address is involved in a connection.

Only teardown connections those source or destination address
matches the netdev interface IP address being changed, and if
they are on the same VLAN as the netdev.

Fixes: e5e74b61 ("i40iw: Add IP addr handling on netdev events")
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Register a netdevice notifier for netdev UP/DOWN
notification events and report the appropriate ib event.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2
as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF)
object count to power of 2 to satisfy hardware requirement.

Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls")
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Consolidate all power of 2 round calculations to
use kernel utility function roundup_pow_of_two().
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Increase I40IW_MAX_IRD_SIZE to 64 which is the device limit.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Ensure both Mike and I are listed as maintainer contacts for Intel's qib,
hfi1, and rdmavt drivers.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

SA queries SM for class port info when there is a LID_CHANGE event.

When a base lid is configured before fm is started ie when smlid is
not yet assigned, SA handles the LID_CHANGE event and tries query SM
with lid 0. This will cause an hang.

[ 1106.958820] INFO: task kworker/2:0:23 blocked for more than 120 seconds.
[ 1106.965082] Tainted: G O 4.12.0+ #1
[ 1106.969602] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
 this message.
[ 1106.977227] kworker/2:0 D 0 23 2 0x00000000
[ 1106.977250] Workqueue: infiniband update_ib_cpi [ib_core]
[ 1106.977261] Call Trace:
[ 1106.977273] __schedule+0x28e/0x860
[ 1106.977285] schedule+0x36/0x80
[ 1106.977298] schedule_timeout+0x1a3/0x2e0
[ 1106.977310] ? radix_tree_iter_tag_clear+0x1b/0x20
[ 1106.977322] ? idr_alloc+0x64/0x90
[ 1106.977334] wait_for_completion+0xe3/0x140
[ 1106.977347] ? wake_up_q+0x80/0x80
[ 1106.977369] update_ib_cpi+0x163/0x210 [ib_core]
[ 1106.977381] process_one_work+0x147/0x370
[ 1106.977394] worker_thread+0x4a/0x390
[ 1106.977406] kthread+0x109/0x140
[ 1106.977418] ? process_one_work+0x370/0x370
[ 1106.977430] ? kthread_park+0x60/0x60
[ 1106.977443] ret_from_fork+0x22/0x30

Always ensure a proper smlid is assigned before querying SM for cpi.

Fixes: ee1c60b1 ("IB/SA: Modify SA to implicitly cache Class Port info")
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The accelerated flag only utilizes two values: 0 and 1.
Modify accelerated flag in struct nes_cm_node to bool.
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

During driver init, various registers are saved to allow restoration
after an FLR or gen3 bump.  Some of these registers are not available
in some circumstances (i.e. Virtual machines).

This bug makes the driver unusable when the PCI device is passed into
a VM, it fails during probe.

Delete unnecessary register read/write, and only access register if
the capability exists.

Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: a618b7e4 ("IB/hfi1: Move saving PCI values to a separate function")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: NPravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds eq support for hip08. The eq table can
be multi-hop addressed.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Reviewed-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Considering the compatibility of supporting hip08's eq
process and possible changes of data structure, this patch
refactors the eq code structure of hip06.

We move all the eq process code for hip06 from hns_roce_eq.c
into hns_roce_hw_v1.c, and also for hns_roce_eq.h. With
these changes, it will be convenient to add the eq support
for later hardware version.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Reviewed-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B),
contradicts other flows such as ipoib_open possibly causing a deadlock.
To prevent this deadlock heavy flush is called with RTNL locked and
only then tries to acquire vlan_rwsem.
This deadlock is possible only when there are child interfaces.

[  140.941758] ======================================================
[  140.946276] WARNING: possible circular locking dependency detected
[  140.950950] 4.15.0-rc1+ #9 Tainted: G           O
[  140.954797] ------------------------------------------------------
[  140.959424] kworker/u32:1/146 is trying to acquire lock:
[  140.963450]  (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[  140.970006]
but task is already holding lock:
[  140.975141]  (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib]
[  140.982105]
which lock already depends on the new lock.
[  140.990023]
the existing dependency chain (in reverse order) is:
[  140.998650]
-> #1 (&priv->vlan_rwsem){++++}:
[  141.005276]        down_read+0x4d/0xb0
[  141.009560]        ipoib_open+0xad/0x120 [ib_ipoib]
[  141.014400]        __dev_open+0xcb/0x140
[  141.017919]        __dev_change_flags+0x1a4/0x1e0
[  141.022133]        dev_change_flags+0x23/0x60
[  141.025695]        devinet_ioctl+0x704/0x7d0
[  141.029156]        sock_do_ioctl+0x20/0x50
[  141.032526]        sock_ioctl+0x221/0x300
[  141.036079]        do_vfs_ioctl+0xa6/0x6d0
[  141.039656]        SyS_ioctl+0x74/0x80
[  141.042811]        entry_SYSCALL_64_fastpath+0x1f/0x96
[  141.046891]
-> #0 (rtnl_mutex){+.+.}:
[  141.051701]        lock_acquire+0xd4/0x220
[  141.055212]        __mutex_lock+0x88/0x970
[  141.058631]        __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib]
[  141.063160]        __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib]
[  141.067648]        process_one_work+0x1f5/0x610
[  141.071429]        worker_thread+0x4a/0x3f0
[  141.074890]        kthread+0x141/0x180
[  141.078085]        ret_from_fork+0x24/0x30
[  141.081559]

other info that might help us debug this:
[  141.088967]  Possible unsafe locking scenario:
[  141.094280]        CPU0                    CPU1
[  141.097953]        ----                    ----
[  141.101640]   lock(&priv->vlan_rwsem);
[  141.104771]                                lock(rtnl_mutex);
[  141.109207]                                lock(&priv->vlan_rwsem);
[  141.114032]   lock(rtnl_mutex);
[  141.116800]
 *** DEADLOCK ***

Fixes: b4b678b0 ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop")
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Congestion counters are counted and queried per physical function.
When working in LAG mode, CNP packets can be sent or received on both
of the functions, thus congestion counters should be aggregated from
the two physical functions.

Fixes: e1f24a79 ("IB/mlx5: Support congestion related counters")
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NAviv Heller <avivh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The use of wait queues in vmw_pvrdma for handling concurrent
access to a resource leaves a race condition which can cause a use
after free bug.

Fix this by using the pattern from other drivers, complete() protected by
dec_and_test to ensure complete() is called only once.

Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver")
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

refcount_dec generates a warning when the operation
causes the refcount to hit zero. Avoid this by using
refcount_dec_and_test.

Fixes: 8b10ba78 ("RDMA/vmw_pvrdma: Add shared receive queue support")
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NAditya Sarwade <asarwade@vmware.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The QP cleanup did not previously call ib_umem_release,
resulting in a user-triggerable kernel resource leak.

Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver")
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NAditya Sarwade <asarwade@vmware.com>
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NBryan Tan <bryantan@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If a wr chain was posted and needed to be flushed, only the first
wr in the chain was completed with FLUSHED status.  The rest were
never completed.  This caused isert to hang on shutdown due to the
missing completions which left iscsi IO commands referenced, stalling
the shutdown.

Fixes: 4fe7c296 ("iw_cxgb4: refactor sq/rq drain logic")

Cc: stable@vger.kernel.org
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The flush/drain logic was not retaining the original wr opcode in
its completion.  This can cause problems if the application uses
the completion opcode to make decisions.

Use bit 10 of the CQE header word to indicate the CQE is a special
drain completion, and save the original WR opcode in the cqe header
opcode field.

Fixes: 4fe7c296 ("iw_cxgb4: refactor sq/rq drain logic")

Cc: stable@vger.kernel.org
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>