Move definition of NUMA_NO_NODE from ia64 and x86_64 arch specific headers
to generic header 'linux/numa.h' for use in generic code.  NUMA_NO_NODE
replaces bare '-1' where it's used in this series to indicate "no node id
specified".  Ultimately, it can be used to replace the -1 elsewhere where
it is used similarly.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch derives a "nodes_allowed" node mask from the numa mempolicy of
the task modifying the number of persistent huge pages to control the
allocation, freeing and adjusting of surplus huge pages when the pool page
count is modified via the new sysctl or sysfs attribute
"nr_hugepages_mempolicy".  The nodes_allowed mask is derived as follows:

* For "default" [NULL] task mempolicy, a NULL nodemask_t pointer
  is produced.  This will cause the hugetlb subsystem to use
  node_online_map as the "nodes_allowed".  This preserves the
  behavior before this patch.
* For "preferred" mempolicy, including explicit local allocation,
  a nodemask with the single preferred node will be produced.
  "local" policy will NOT track any internode migrations of the
  task adjusting nr_hugepages.
* For "bind" and "interleave" policy, the mempolicy's nodemask
  will be used.
* Other than to inform the construction of the nodes_allowed node
  mask, the actual mempolicy mode is ignored.  That is, all modes
  behave like interleave over the resulting nodes_allowed mask
  with no "fallback".

See the updated documentation [next patch] for more information
about the implications of this patch.

Examples:

Starting with:

	Node 0 HugePages_Total:     0
	Node 1 HugePages_Total:     0
	Node 2 HugePages_Total:     0
	Node 3 HugePages_Total:     0

Default behavior [with or without this patch] balances persistent
hugepage allocation across nodes [with sufficient contiguous memory]:

	sysctl vm.nr_hugepages[_mempolicy]=32

yields:

	Node 0 HugePages_Total:     8
	Node 1 HugePages_Total:     8
	Node 2 HugePages_Total:     8
	Node 3 HugePages_Total:     8

Of course, we only have nr_hugepages_mempolicy with the patch,
but with default mempolicy, nr_hugepages_mempolicy behaves the
same as nr_hugepages.

Applying mempolicy--e.g., with numactl [using '-m' a.k.a.
'--membind' because it allows multiple nodes to be specified
and it's easy to type]--we can allocate huge pages on
individual nodes or sets of nodes.  So, starting from the
condition above, with 8 huge pages per node, add 8 more to
node 2 using:

	numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40

This yields:

	Node 0 HugePages_Total:     8
	Node 1 HugePages_Total:     8
	Node 2 HugePages_Total:    16
	Node 3 HugePages_Total:     8

The incremental 8 huge pages were restricted to node 2 by the
specified mempolicy.

Similarly, we can use mempolicy to free persistent huge pages
from specified nodes:

	numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32

yields:

	Node 0 HugePages_Total:     4
	Node 1 HugePages_Total:     4
	Node 2 HugePages_Total:    16
	Node 3 HugePages_Total:     8

The 8 huge pages freed were balanced over nodes 0 and 1.

[rientjes@google.com: accomodate reworked NODEMASK_ALLOC]
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Factor init_nodemask_of_node() out of the nodemask_of_node() macro.

This will be used to populate the huge pages "nodes_allowed" nodemask for
a single node when basing nodes_allowed on a preferred/local mempolicy or
when a persistent huge page pool page count is modified via a per node
sysfs attribute.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In preparation for constraining huge page allocation and freeing by the
controlling task's numa mempolicy, add a "nodes_allowed" nodemask pointer
to the allocate, free and surplus adjustment functions.  For now, pass
NULL to indicate default behavior--i.e., use node_online_map.  A
subsqeuent patch will derive a non-default mask from the controlling
task's numa mempolicy.

Note that this method of updating the global hstate nr_hugepages under the
constraint of a nodemask simplifies keeping the global state
consistent--especially the number of persistent and surplus pages relative
to reservations and overcommit limits.  There are undoubtedly other ways
to do this, but this works for both interfaces: mempolicy and per node
attributes.

[rientjes@google.com: fix HIGHMEM compile error]
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Modify the hstate_next_node* functions to allow them to be called to
obtain the "start_nid".  Then, whereas prior to this patch we
unconditionally called hstate_next_node_to_{alloc|free}(), whether or not
we successfully allocated/freed a huge page on the node, now we only call
these functions on failure to alloc/free to advance to next allowed node.

Factor out the next_node_allowed() function to handle wrap at end of
node_online_map.  In this version, the allowed nodes include all of the
online nodes.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Reviewed-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a series of patches to provide control over the location of the
allocation and freeing of persistent huge pages on a NUMA platform.
Please consider for merging into mmotm.

This series uses two mechanisms to constrain the nodes from which
persistent huge pages are allocated: 1) the task NUMA mempolicy of the
task modifying a new sysctl "nr_hugepages_mempolicy", based on a
suggestion by Mel Gorman; and 2) a subset of the hugepages hstate sysfs
attributes have been added [in V4] to each node system device under:

	/sys/devices/node/node[0-9]*/hugepages

The per node attibutes allow direct assignment of a huge page count on a
specific node, regardless of the task's mempolicy or cpuset constraints.

This patch:

NODEMASK_ALLOC(x, m) assumes x is a type of struct, which is unnecessary.
It's perfectly reasonable to use this macro to allocate a nodemask_t,
which is anonymous, either dynamically or on the stack depending on
NODES_SHIFT.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Christoph pointed out inc_zone_page_state(NR_ISOLATED) should be placed
in right after isolate_page().

This patch does it.
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Also rename "len" to "sz". No behavior change.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Also convert more size_inside_page() users.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No behaviour change.

[akpm@linux-foundation.org: cleanuplets]
[akpm@linux-foundation.org: remove unused `ret']
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce size_inside_page() to replace duplicate /dev/mem code.

Also apply it to /dev/kmem, whose alignment logic was buggy.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The len test in write_kmem() is always true, so can be reduced.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On ia64, the following test program exit abnormally, because glibc thread
library called abort().

 ========================================================
 (gdb) bt
 #0  0xa000000000010620 in __kernel_syscall_via_break ()
 #1  0x20000000003208e0 in raise () from /lib/libc.so.6.1
 #2  0x2000000000324090 in abort () from /lib/libc.so.6.1
 #3  0x200000000027c3e0 in __deallocate_stack () from /lib/libpthread.so.0
 #4  0x200000000027f7c0 in start_thread () from /lib/libpthread.so.0
 #5  0x200000000047ef60 in __clone2 () from /lib/libc.so.6.1
 ========================================================

The fact is, glibc call munmap() when thread exitng time for freeing
stack, and it assume munlock() never fail.  However, munmap() often make
vma splitting and it with many mapcount make -ENOMEM.

Oh well, that's crazy, because stack unmapping never increase mapcount.
The maxcount exceeding is only temporary.  internal temporary exceeding
shouldn't make ENOMEM.

This patch does it.

 test_max_mapcount.c
 ==================================================================
  #include<stdio.h>
  #include<stdlib.h>
  #include<string.h>
  #include<pthread.h>
  #include<errno.h>
  #include<unistd.h>

  #define THREAD_NUM 30000
  #define MAL_SIZE (8*1024*1024)

 void *wait_thread(void *args)
 {
 	void *addr;

 	addr = malloc(MAL_SIZE);
 	sleep(10);

 	return NULL;
 }

 void *wait_thread2(void *args)
 {
 	sleep(60);

 	return NULL;
 }

 int main(int argc, char *argv[])
 {
 	int i;
 	pthread_t thread[THREAD_NUM], th;
 	int ret, count = 0;
 	pthread_attr_t attr;

 	ret = pthread_attr_init(&attr);
 	if(ret) {
 		perror("pthread_attr_init");
 	}

 	ret = pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
 	if(ret) {
 		perror("pthread_attr_setdetachstate");
 	}

 	for (i = 0; i < THREAD_NUM; i++) {
 		ret = pthread_create(&th, &attr, wait_thread, NULL);
 		if(ret) {
 			fprintf(stderr, "[%d] ", count);
 			perror("pthread_create");
 		} else {
 			printf("[%d] create OK.\n", count);
 		}
 		count++;

 		ret = pthread_create(&thread[i], &attr, wait_thread2, NULL);
 		if(ret) {
 			fprintf(stderr, "[%d] ", count);
 			perror("pthread_create");
 		} else {
 			printf("[%d] create OK.\n", count);
 		}
 		count++;
 	}

 	sleep(3600);
 	return 0;
 }
 ==================================================================

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On a system with large amount of memory (256GB), invoking page-types can
take quite a long time, which is unreasonable considering the user only
wants a description of the flags:

	# time ./page-types -d 0x10
	0x0000000000000010	____D_____________________________	dirty

	real	0m34.285s
	user	0m1.966s
	sys	0m32.313s

This is because we still walk the entire address range.

Exiting early seems like a reasonble solution:

# time ./page-types -d 0x10
	0x0000000000000010	____D_____________________________	dirty

	real	0m0.007s
	user	0m0.001s
	sys	0m0.005s
Signed-off-by: NAlex Chiang <achiang@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Haicheng Li <haicheng.li@intel.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Align the output when page-type -h is invoked.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Teach page-types to describe page flags directly from the command line.

Why is this useful?  For instance, if you're using memory hotplug and see
this in /var/log/messages:

	kernel: removing from LRU failed 3836dd0/1/1e00000000000010

It would be nice to decode those page flags without staring at the source.

Example usage and output:

# Documentation/vm/page-types -d 0x10
0x0000000000000010	____D_____________________________	dirty

# Documentation/vm/page-types -d anon
0x0000000000001000	____________a_____________________	anonymous

# Documentation/vm/page-types -d anon,0x10
0x0000000000001010	____D_______a_____________________	dirty,anonymous

[achiang@hp.com: documentation]
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Haicheng Li <haicheng.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If not signed, testing of the read() return value in this function
will not work.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The oom killer header, including information such as the allocation order
and gfp mask, current's cpuset and memory controller, call trace, and VM
state information is currently only shown when the oom killer has selected
a task to kill.

This information is omitted, however, when the oom killer panics either
because of panic_on_oom sysctl settings or when no killable task was
found.  It is still relevant to know crucial pieces of information such as
the allocation order and VM state when diagnosing such issues, especially
at boot.

This patch displays the oom killer header whenever it panics so that bug
reports can include pertinent information to debug the issue, if possible.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sam was fine with handing over kbuild maintainership to me. The git
trees are already in linux-next, a merge request will follow shortly.
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A specially-crafted Hierarchical File System (HFS) filesystem could cause
a buffer overflow to occur in a process's kernel stack during a memcpy()
call within the hfs_bnode_read() function (at fs/hfs/bnode.c:24).  The
attacker can provide the source buffer and length, and the destination
buffer is a local variable of a fixed length.  This local variable (passed
as "&entry" from fs/hfs/dir.c:112 and allocated on line 60) is stored in
the stack frame of hfs_bnode_read()'s caller, which is hfs_readdir().
Because the hfs_readdir() function executes upon any attempt to read a
directory on the filesystem, it gets called whenever a user attempts to
inspect any filesystem contents.

[amwang@redhat.com: modify this patch and fix coding style problems]
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit d8e180dc "bsdacct: switch
credentials for writing to the accounting file" introduced credential
switching during final acct data collecting.  However, uid/gid pair
continued to be collected from current which became credentials of who
created acct file, not who exits.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14676Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reported-by: NJuho K. Juopperi <jkj@kapsi.fi>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMichal Schmidt <mschmidt@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-core: i2c bus should support PM entries in struct dev_pm_ops
  i2c: Get rid of I2C_CLIENT_MODULE_PARM
  i2c: Drop I2C_CLIENT_INSMOD_2 to 8
  i2c: Drop I2C_CLIENT_INSMOD_1
  i2c: Get rid of struct i2c_client_address_data
  i2c: Drop the kind parameter from detect callbacks

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Avoid IO in udf_clear_inode
  udf: Try harder when looking for VAT inode
  udf: Fix compilation with UDFFS_DEBUG enabled

It is not very good to do IO in udf_clear_inode. First, VFS does not really
expect inode to become dirty there and thus we have to write it ourselves,
second, memory reclaim gets blocked waiting for IO when it does not really
expect it, third, the IO pattern (e.g. on umount) resulting from writes in
udf_clear_inode is bad and it slows down writing a lot.

The reason why UDF needed to do IO in udf_clear_inode is that UDF standard
mandates extent length to exactly match inode size. But when we allocate
extents to a file or directory, we don't really know what exactly the final
file size will be and thus temporarily set it to block boundary and later
truncate it to exact length in udf_clear_inode. Now, this is changed to
truncate to final file size in udf_release_file for regular files. For
directories and symlinks, we do the truncation at the moment when learn
what the final file size will be.
Signed-off-by: NJan Kara <jack@suse.cz>

Some disks do not contain VAT inode in the last recorded block as required
by the standard but a few blocks earlier (or the number of recorded blocks
is wrong). So look for the VAT inode a bit before the end of the media.
Signed-off-by: NJan Kara <jack@suse.cz>

Signed-off-by: NJan Kara <jack@suse.cz>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Clean up thermal init by introducing intel_thermal_supported()
  x86, mce: Thermal monitoring depends on APIC being enabled
  x86: Gart: fix breakage due to IOMMU initialization cleanup
  x86: Move swiotlb initialization before dma32_free_bootmem
  x86: Fix build warning in arch/x86/mm/mmio-mod.c
  x86: Remove usedac in feature-removal-schedule.txt
  x86: Fix duplicated UV BAU interrupt vector
  nvram: Fix write beyond end condition; prove to gcc copy is safe
  mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
  x86: Limit the number of processor bootup messages
  x86: Remove enabling x2apic message for every CPU
  doc: Add documentation for bootloader_{type,version}
  x86, msr: Add support for non-contiguous cpumasks
  x86: Use find_e820() instead of hard coded trampoline address
  x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks

Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: CodingStyle fixes
  pcmcia: remove unused IRQ_FIRST_SHARED

Struct dev_pm_ops is not configured in current i2c bus type. i2c drivers
only depends on suspend/resume entries in struct dev_pm_ops are not
informed of PM suspend and resume events by i2c framework.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

There is no user left of I2C_CLIENT_MODULE_PARM, so we can finally
get rid of this ugly macro.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>

These macros simply declare an enum, so drivers might as well declare
it themselves. This puts an end to the arbitrary limit of 8 chip types
per i2c driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>

This macro simply declares an enum, so drivers might as well declare
it themselves.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>

Struct i2c_client_address_data only contains one field at this point,
which makes its usefulness questionable. Get rid of it and pass simple
address lists around instead.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>

The "kind" parameter always has value -1, and nobody is using it any
longer, so we can remove it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  spi: fix probe/remove section markings
  Add OMAP spi100k driver
  spi-imx: don't access struct device directly but use dev_get_platdata
  spi-imx: Add mx25 support
  spi-imx: use positive logic to distinguish cpu variants
  spi-imx: correct check for platform_get_irq failing
  ARM: NUC900: Add spi driver support for nuc900
  spi: SuperH MSIOF SPI Master driver V2
  spi: fix spidev compilation failure when VERBOSE is defined
  spi/au1550_spi: fix setupxfer not to override cfg with zeros
  spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
  spi/i.MX: fix broken error handling for gpio_request
  spi/i.mx: drain MXC SPI transfer buffer when probing device
  MAINTAINERS: add SPI co-maintainer.
  spi/xilinx_spi: fix incorrect casting
  spi/mpc52xx-spi: minor cleanups
  xilinx_spi: add a platform driver using the xilinx_spi common module.
  xilinx_spi: add support for the DS570 IP.
  xilinx_spi: Switch to iomem functions and support little endian.
  xilinx_spi: Split into of driver and generic part.
  ...

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf sched: Fix build failure on sparc
  perf bench: Add "all" pseudo subsystem and "all" pseudo suite
  perf tools: Introduce perf_session class
  perf symbols: Ditch dso->find_symbol
  perf symbols: Allow lookups by symbol name too
  perf symbols: Add missing "Variables" entry to map_type__name
  perf symbols: Add support for 'variable' symtabs
  perf symbols: Introduce ELF counterparts to symbol_type__is_a
  perf symbols: Introduce symbol_type__is_a
  perf symbols: Rename kthreads to kmaps, using another abstraction for it
  perf tools: Allow building for ARM
  hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
  perf tools: Allow cross compiling
  tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
  tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Trivial conflict due to different fixes to modify_user_hw_breakpoint()
in include/linux/hw_breakpoint.h

Global variable declarations must match the definitions in section attributes
as the compiler is at liberty to vary the method it uses to access a variable,
depending on the section it is in.

When building the FRV arch, I now see:

  drivers/built-in.o: In function `pci_apply_final_quirks':
  drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o

because the declaration of pci_dfl_cache_line_size in linux/pci.h does not
match the definition in drivers/pci/pci.c.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If there is no hardware breakpoint support, modify_user_hw_breakpoint()
tries to return a NULL pointer through as an 'int' return value:

  In file included from kernel/exit.c:53:
  include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint':
  include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast

Return 0 instead.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>