skb_frag can in fact point at either skb
or fskb so rename it generally "frag".
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

frag points at nskb, so name it appropriately
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Giuseppe Cavallaro says:

====================
stmmac fixes: EEE and chained mode

These patches are to fix some new problems in the STMMAC driver.

Mandatory changes are for EEE that needs to be disabled if not supported
and for the chain mode that is broken and the kernel panics if this mode
is enabled.

v3: removed a patch from my previous set that touched the stmmac_tx path
    that has not to be applied. Other patches for cleaning-up will be
    sent on top of net-next git repo.

v4: do not surround the defaul buffer selection using Koption and adopt
    a default to 1536bytes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to fix the compatibility to the STiD127 SoC.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to fix the chain mode that was broken
and generated a panic. This patch reviews the chain/ring
modes now shaing the same structure and taking care
about the pointers and callbacks.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to fix and tune the default buffer sizes.
It reduces the default bufsize used by the driver from
4KiB to 1536 bytes.

Patch has been tested on both ARM and SH4 platform based.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to disable the EEE (so HW and timers)
for example when the phy communicates that the EEE
can be supported anymore.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vmxnet3's netpoll driver is incorrectly coded.  It directly calls
vmxnet3_do_poll, which is the driver internal napi poll routine.  As the netpoll
controller method doesn't block real napi polls in any way, there is a potential
for race conditions in which the netpoll controller method and the napi poll
method run concurrently.  The result is data corruption causing panics such as this
one recently observed:
PID: 1371   TASK: ffff88023762caa0  CPU: 1   COMMAND: "rs:main Q:Reg"
 #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b
 #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92
 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570
 #3 [ffff88023abd58e0] die at ffffffff81010e0b
 #4 [ffff88023abd5910] do_trap at ffffffff8152add4
 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95
 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b
    [exception RIP: vmxnet3_rq_rx_complete+1968]
    RIP: ffffffffa00f1e80  RSP: ffff88023abd5ac8  RFLAGS: 00010086
    RAX: 0000000000000000  RBX: ffff88023b5dcee0  RCX: 00000000000000c0
    RDX: 0000000000000000  RSI: 00000000000005f2  RDI: ffff88023b5dcee0
    RBP: ffff88023abd5b48   R8: 0000000000000000   R9: ffff88023a3b6048
    R10: 0000000000000000  R11: 0000000000000002  R12: ffff8802398d4cd8
    R13: ffff88023af35140  R14: ffff88023b60c890  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3]
 #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3]
 #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7

The fix is to do as other drivers do, and have the poll controller call the top
half interrupt handler, which schedules a napi poll properly to recieve frames

Tested by myself, successfully.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: stable@vger.kernel.org
Reviewed-by: NShreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With TX VLAN offload enabled the source MAC address for frames sent using the
VLAN interface is currently set to the address of the real interface. This is
wrong since the VLAN interface may be configured with a different address.

The bug was introduced in commit 2205369a
("vlan: Fix header ops passthru when doing TX VLAN offload.").

This patch sets the source address before calling the create function of the
real interface.
Signed-off-by: NPeter Boström <peter.bostrom@netrounds.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current netback uses gso_type to check whether the skb contains
gso offload, and this is wrong. Gso_size is the right one to
check gso existence, and gso_type is only used to check gso type.

Some skbs contains nonzero gso_type and zero gso_size, current
netback would treat these skbs as gso and create wrong response
for this. This also causes ssh failure to domu from other server.

V2: use skb_is_gso function as Paul Durrant suggested
Signed-off-by: NAnnie Li <annie.li@oracle.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resizing fq hash table allocates memory while holding qdisc spinlock,
with BH disabled.

This is definitely not good, as allocation might sleep.

We can drop the lock and get it when needed, we hold RTNL so no other
changes can happen at the same time.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

udelay() does not work on some architectures for values above
2000, in particular on ARM:

ERROR: "__bad_udelay" [drivers/net/ethernet/brocade/bna/bna.ko] undefined!
Reported-by: NVagrant Cascadian <vagrant@debian.org>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The WARN_ON(root == &noop_qdisc)) added in qdisc_list_add()
can trigger in normal conditions when devices are not up.
It should be done only right before the list_add_tail() call.

Fixes: e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()")
Reported-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NMirco Tischler <mt-ml@gmx.de>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Please pull this batch of fixes intende for the 3.14 stream...

For the mac80211 bits, Johannes says:

"Here I have a fix from Eliad for the minimal channel width calculation
in the mac80211 code which lead to monitor mode not working at all for
drivers using that. One of my fixes is for an issue noticed by Michal,
we clear an already cleared value but do it without locking, so just
remove that. The other is for a data leak - we leak two bytes of kernel
memory out over the air in QoS NULL frames because those don't get a
sequence number assigned in the TX path."

For the iwlwifi bits, Emmanuel says:

"One more fix and an update for device IDs.
There is a bugzilla reported for the fix which is mentioned in the commit message."

Along with those...

Amitkumar Karwar provides two mwifiex fixes, both correcting some
data transcription problems.

Ivaylo Dimitrov uses skb_trim in the wl1251 driver to avoid
HAVE_EFFICIENT_UNALIGNED_ACCESS problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pci shutdown handler added in:

    bnx2: Add pci shutdown handler
    commit 25bfb1dd

created a shutdown down sequence without chip reset if the device was
never brought up.  This can cause the firmware to shutdown the PHY
prematurely and cause MMIO read cycles to be unresponsive.  On some
systems, it may generate NMI in the bnx2's pci shutdown handler.

The fix is to tell the firmware not to shutdown the PHY if there was
no prior chip reset.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

DST_NOCOUNT should only be used if an authorized user adds routes
locally. In case of routes which are added on behalf of router
advertisments this flag must not get used as it allows an unlimited
number of routes getting added remotely.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the PF call to pci_enable_sriov from the PF probe function
stalls for 10 seconds times the number of VFs probed on the host. This
happens because the way for such VFs to determine of the PF
initialization finished, is by attempting to issue reset on the
comm-channel and get timeout (after 10s).

The PF probe function is called from a kenernel workqueue, and therefore
during that time, rcu lock is being held and kernel's workqueue is
stalled. This blocks other processes that try to use the workqueue
or rcu lock.  For example, interface renaming which is calling
rcu_synchronize is blocked, and timedout by systemd.

Changed mlx4_init_slave() to allow VF probed on the host to immediatly
detect that the PF is not ready, and return EPROBE_DEFER instantly.

Only when the PF finishes the initialization, allow such VFs to
access the comm channel.

This issue and fix are relevant only for probed VFs on the hypervisor,
there is no way to pass this information to a VM until comm channel is
ready, so in a VM, if PF is not ready, the first command will be timedout
after 10 seconds and return EPROBE_DEFER.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a regression introduced by [1]. outbox was accessed instead of
outbox->buf. Typo was copy-pasted to [2] and [3].

[1] - cc1ade94 mlx4_core: Disable memory windows for virtual functions
[2] - 4de65803 mlx4_core: Add support for steerable IB UD QPs
[3] - 7ffdf726 net/mlx4_core: Add basic support for TCP/IP offloads under
      tunneling
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We didn't correctly check cases where the value for lp_interval is not
within the legal range due to a missing table terminator.

This would let userspace trigger a kernel panic by specifying a value out
of range:

	echo -1 > /sys/devices/virtual/net/bond0/bonding/lp_interval

Introduced by commit 4325b374 ("bonding: convert lp_interval to use
the new option API").
Acked-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS
offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds).

This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS
header.

The issue detected and the fix verified by running MS HCK Offload LSO test on
top of QEMU Windows guests, as this test sends IPv6 packets with
IPPROTO_DSTOPTS.
Signed-off-by: NAnton Nayshtut <anton@swortex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code to load a MAC address into a u64 for passing to the
hypervisor via a register is broken on little endian.

Create a helper function called ibmveth_encode_mac_addr
which does the right thing in both big and little endian.

We were storing the MAC address in a long in struct ibmveth_adapter.
It's never used so remove it - we don't need another place in the
driver where we create endian issues with MAC addresses.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The unix socket code is using the result of csum_partial to
hash into a lookup table:

	unix_hash_fold(csum_partial(sunaddr, len, 0));

csum_partial is only guaranteed to produce something that can be
folded into a checksum, as its prototype explains:

 * returns a 32-bit number suitable for feeding into itself
 * or csum_tcpudp_magic

The 32bit value should not be used directly.

Depending on the alignment, the ppc64 csum_partial will return
different 32bit partial checksums that will fold into the same
16bit checksum.

This difference causes the following testcase (courtesy of
Gustavo) to sometimes fail:

#include <sys/socket.h>
#include <stdio.h>

int main()
{
	int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);

	int i = 1;
	setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4);

	struct sockaddr addr;
	addr.sa_family = AF_LOCAL;
	bind(fd, &addr, 2);

	listen(fd, 128);

	struct sockaddr_storage ss;
	socklen_t sslen = (socklen_t)sizeof(ss);
	getsockname(fd, (struct sockaddr*)&ss, &sslen);

	fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0);

	if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){
		perror(NULL);
		return 1;
	}
	printf("OK\n");
	return 0;
}

As suggested by davem, fix this by using csum_fold to fold the
partial 32bit checksum into a 16bit checksum before using it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The original documentation was very unclear.

The code fix is presumably related to the formerly unclear
documentation: SOCK_TIMESTAMPING_RX_SOFTWARE has no effect on
__sock_recv_timestamp's behavior, so calling __sock_recv_ts_and_drops
from sock_recv_ts_and_drops if only SOCK_TIMESTAMPING_RX_SOFTWARE is
set is pointless.  This should have no user-observable effect.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With -Werror=array-bounds, gcc v4.7.x warns that in phy_find_valid(), the
settings[] "array subscript is above array bounds", I think because idx is
a signed integer and if the caller supplied idx < 0, we pass the guard but
still reference out of bounds.

Fix this by making idx unsigned here and elsewhere.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quoting Alexander Aring:
  While fragmentation and unloading of 6lowpan module I got this kernel Oops
  after few seconds:

  BUG: unable to handle kernel paging request at f88bbc30
  [..]
  Modules linked in: ipv6 [last unloaded: 6lowpan]
  Call Trace:
   [<c012af4c>] ? call_timer_fn+0x54/0xb3
   [<c012aef8>] ? process_timeout+0xa/0xa
   [<c012b66b>] run_timer_softirq+0x140/0x15f

Problem is that incomplete frags are still around after unload; when
their frag expire timer fires, we get crash.

When a netns is removed (also done when unloading module), inet_frag
calls the evictor with 'force' argument to purge remaining frags.

The evictor loop terminates when accounted memory ('work') drops to 0
or the lru-list becomes empty.  However, the mem accounting is done
via percpu counters and may not be accurate, i.e. loop may terminate
prematurely.

Alter evictor to only stop once the lru list is empty when force is
requested.
Reported-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Reported-by: NAlexander Aring <alex.aring@gmail.com>
Tested-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Hugne says:

====================
tipc: refcount and memory leak fixes

v3: Remove error logging from data path completely. Rebased on top of
    latest net merge.

v2: Drop specific -ENOMEM logging in patch #1 (tipc: allow connection
    shutdown callback to be invoked in advance) And add a general error
    message if an internal server tries to send a message on a
    closed/nonexisting connection.

In addition to the fix for refcount leak and memory leak during
module removal, we also fix a problem where the topology server
listening socket where unexpectedly closed. We also eliminate an
unnecessary context switch during accept()/recvmsg() for nonblocking
sockets.

It might be good to include this patchset in stable aswell. After the
v3 rebase on latest merge from net all patches apply cleanly on that
tree.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Failure to schedule a TIPC tasklet with tipc_k_signal because the
tasklet handler is disabled is not an error. It means TIPC is
currently in the process of shutting down. We remove the error
logging in this case.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the TIPC module is removed, the tasklet handler is disabled
before all other subsystems. This will cause lingering publications
in the name table because the node_down tasklets responsible to
clean up publications from an unreachable node will never run.
When the name table is shut down, these publications are detected
and an error message is logged:
tipc: nametbl_stop(): orphaned hash chain detected
This is actually a memory leak, introduced with commit
993b858e ("tipc: correct the order
of stopping services at rmmod")

Instead of just logging an error and leaking memory, we free
the orphaned entries during nametable shutdown.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a topology server subscriber is disconnected, the associated
connection id is set to zero. A check vs zero is then done in the
subscription timeout function to see if the subscriber have been
shut down. This is unnecessary, because all subscription timers
will be cancelled when a subscriber terminates. Setting the
connection id to zero is actually harmful because id zero is the
identity of the topology server listening socket, and can cause a
race that leads to this socket being closed instead.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When messages are received via tipc socket under non-block mode,
schedule_timeout() is called in tipc_wait_for_rcvmsg(), that is,
the process of receiving messages will be scheduled once although
timeout value passed to schedule_timeout() is 0. The same issue
exists in accept()/wait_for_accept(). To avoid this unnecessary
process switch, we only call schedule_timeout() if the timeout
value is non-zero.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a
connection instance, its reference count value is increased if
it's found. But subsequently if it's found that the connection is
closed, the work of sending message is not queued into its server
send workqueue, and the connection reference count is not decreased.
This will cause a reference count leak. To reproduce this problem,
an application would need to open and closes topology server
connections with high intensity.

We fix this by immediately decrementing the connection reference
count if a send fails due to the connection being closed.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently connection shutdown callback function is called when
connection instance is released in tipc_conn_kref_release(), and
receiving packets and sending packets are running in different
threads. Even if connection is closed by the thread of receiving
packets, its shutdown callback may not be called immediately as
the connection reference count is non-zero at that moment. So,
although the connection is shut down by the thread of receiving
packets, the thread of sending packets doesn't know it. Before
its shutdown callback is invoked to tell the sending thread its
connection has been closed, the sending thread may deliver
messages by tipc_conn_sendmsg(), this is why the following error
information appears:

"Sending subscription event failed, no memory"

To eliminate it, allow connection shutdown callback function to
be called before connection id is removed in tipc_close_conn(),
which makes the sending thread know the truth in time that its
socket is closed so that it doesn't send message to it. We also
remove the "Sending XXX failed..." error reporting for topology
and config services.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As pppol2tp_recv() never queues up packets to plain L2TP sockets,
pppol2tp_recvmsg() never returns data to userspace, thus making
the recv*() system calls unusable.

Instead of dropping packets when the L2TP socket isn't bound to a PPP
channel, this patch adds them to its reception queue.
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e0d4435f "l2tp: Update PPP-over-L2TP driver to work over L2TPv3"
broke the PPPOL2TP_SO_SENDSEQ setsockopt. The L2TP header length was
previously computed by pppol2tp_l2t_header_len() before each call to
l2tp_xmit_skb(). Now that header length is retrieved from the hdr_len
session field, this field must be updated every time the L2TP header
format is modified, or l2tp_xmit_skb() won't push the right amount of
data for the L2TP header.

This patch uses l2tp_session_set_header_len() to adjust hdr_len every
time sequencing is (de)activated from userspace (either by the
PPPOL2TP_SO_SENDSEQ setsockopt or the L2TP_ATTR_SEND_SEQ netlink
attribute).
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While preparing association request, intersection of device's
VHT capability information and corresponding field advertised
by AP is used.

This patch fixes a couple errors while saving and copying vht_cap
and vht_oper fields from AP's beacon.

Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

While preparing association request, intersection of device's HT
capability information and corresponding fields advertised by AP
is used.

This patch fixes an error while copying this field from AP's
beacon.

Cc: <stable@vger.kernel.org>
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It moves the state setting for query into rndis_filter_receive_response().
All callbacks including query-complete and status-callback are synchronized
by channel->inbound_lock. This prevents pentential race between them.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When allocating RX buffers a fixed size is used, while freeing is based
on actually received bytes, resulting in the following kernel warning
when CONFIG_DMA_API_DEBUG is enabled:
 WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894()
 macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes]
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65
 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
 [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8)
 [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
 [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
 [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894)
 [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
 [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170)
 [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94)
 [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188)
 [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280)
 [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8)
 [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c)
 [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
 [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
 Exception stack(0xc056df20 to 0xc056df68)
 df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000
 df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658
 df60: 20000013 ffffffff
 [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8)
 [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138)
 [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c)
 [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124)
 [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0)
 ---[ end trace d5fdc38641bd3a11 ]---
 Mapped at:
  [<c0227184>] debug_dma_map_page+0x48/0x11c
  [<c02ab32c>] gem_rx_refill+0x154/0x1f8
  [<c02ac7b4>] macb_open+0x270/0x3e0
  [<c03152e0>] __dev_open+0x7c/0xfc
  [<c031554c>] __dev_change_flags+0x8c/0x140

Fixing this by passing the same size which is passed during mapping the
memory to the unmap function as well.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>