This driver adds support to perform calibration of the MIPI pads for CSI
and DSI.
Signed-off-by: NThierry Reding <treding@nvidia.com>

This patch adds support for hardware syncpoint bases. This creates
a simple mechanism to stall the command FIFO until an operation is
completed.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Reviewed-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Functions host1x_syncpt_request() and _host1x_syncpt_alloc() have
been taking a separate boolean flag ('client_managed') for indicating
if the syncpoint value should be tracked by the host1x driver.

This patch converts the field into generic 'flags' field so that
we can easily add more information while requesting a syncpoint.
Clients are adapted to use the new interface accordingly.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Reviewed-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Initialize and power the 3D unit on Tegra20, Tegra30 and Tegra114 and
register a channel with the Tegra DRM driver so that the unit can be
used from userspace.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Tegra DRM driver currently uses some infrastructure to defer the DRM
core initialization until all required devices have registered. The same
infrastructure can potentially be used by any other driver that requires
more than a single sub-device of the host1x module.

Make the infrastructure more generic and keep only the DRM specific code
in the DRM part of the driver. Eventually this will make it easy to move
the DRM driver part back to the DRM subsystem.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Expose the buffer objects, syncpoint and channel functionality in the
public public header so that drivers can use them.
Signed-off-by: NThierry Reding <treding@nvidia.com>

This structure derives from host1x_client. DRM-specific fields are moved
from host1x_client to this structure, so that host1x_client can remain
agnostic of DRM.
Signed-off-by: NThierry Reding <treding@nvidia.com>

In preparation to support host1x clients other than DRM, move this
header into a public location.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Add client driver for 2D device, and IOCTLs to pass work to host1x
channel for 2D.

Also adds functions that can be called to access sync points from
DRM.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for host1x client modules, and host1x channels to submit
work to the clients.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

The platform data header is no longer used. Delete it.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Tegra20/Tegra30 supports the spi interface through its SLINK
controller. Add spi driver for SLINK controller.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

There are some common macros for Tegra low-level assembly code. Clean
up them into one header file and move the definitions that will be
re-used into it as well.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

This particular code had no effect on WFI execution. It only
asserts/de-asserts signal to tegra "legacy" CPU idle stats
monitor, which we are no longer using (cpufreq is based on
kernel s/w idle stats instead).
Signed-off-by: NPrashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

Commit 6f6f6a70 "ARM: create a common IOMEM definition" moved macro
IOMEM(), and requires users to include <asm/assembler.h>. Fix Tegra's
sleep.S to do so. This fixes:

arch/arm/mach-tegra/sleep.S: Assembler messages:
arch/arm/mach-tegra/sleep.S:77: Error: missing ')'
arch/arm/mach-tegra/sleep.S:77: Error: garbage following instruction
    -- `movw r0,#:lower16:(0x60007000-0x60000000+IOMEM(0xFE200000))'

Note: This only shows up after 0a258935 "ARM: tegra: update defconfig"
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>

Configure the flow controller for clockgating and enter WFI

Based on work by:

Colin Cross <ccross@android.com>
Gary King <gking@nvidia.com>
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NColin Cross <ccross@android.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>