- 04 12月, 2012 3 次提交
-
-
由 Rahul Sharma 提交于
This patch fixes the problem of mapping contigous and non contigous dma buffers. Currently page struct is calculated from the buf->dma_addr which is not the physical address. It is replaced by buf->pages which points to the page struct of the first page of contigous memory chunk. This gives the correct page frame number for mapping. Non-contigous dma buffers are described using SG table and SG lists. Each valid SG List is pointing to a single page or group of pages which are physically contigous. Current implementation just maps the first page of each SG List and leave the other pages unmapped, leading to a crash. Given solution finds the page struct for the faulting page through parsing SG table and map it. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
With iommu support, non-continuous buffer also is supported so this patch removes these checking from exynos_drm_gem_get/put_dma_addr funciton. This patch is based on the below patch set, "drm/exynos: add iommu support for -next". http://www.spinics.net/lists/dri-devel/msg29041.htmlSigned-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
Chagelog v2: removed unnecessary structure, struct g2d_gem_node. Chagelog v1: This patch adds iommu support for g2d driver. For this, it adds subdrv_probe/remove callback to enable or disable g2d iommu. And with this patch, in case of using g2d iommu, we can get or put device address to a gem handle from user through exynos_drm_gem_get/put_dma_addr(). Actually, these functions take a reference to a gem handle so that the gem object used by g2d dma is released properly. And runqueue_node has a pointer to drm_file object of current process to manage gem handles to owner. This patch is based on the below patch set, "drm/exynos: add iommu support for -next". http://www.spinics.net/lists/dri-devel/msg29041.htmlSigned-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 29 11月, 2012 1 次提交
-
-
由 Inki Dae 提交于
Changelog v4: - fix condition to drm_iommu_detach_device funtion. Changelog v3: - add dma_parms->max_segment_size setting of drm_device->dev. - use devm_kzalloc instead of kzalloc. Changelog v2: - fix iommu attach condition. . check archdata.dma_ops of drm device instead of subdrv device's one. - code clean to exynos_drm_iommu.c file. . remove '#ifdef CONFIG_ARM_DMA_USE_IOMMU' from exynos_drm_iommu.c and add it to driver/gpu/drm/exynos/Kconfig. Changelog v1: This patch adds iommu support for exynos drm framework with dma mapping api. In this patch, we used dma mapping api to allocate physical memory and maps it with iommu table and removed some existing codes and added new some codes for iommu support. GEM allocation requires one device object to use dma mapping api so this patch uses one iommu mapping for all sub drivers. In other words, all sub drivers have same iommu mapping. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 09 10月, 2012 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 10月, 2012 2 次提交
-
-
由 David Howells 提交于
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NDave Airlie <airlied@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
由 David Howells 提交于
Remove redundant DRM UAPI header #inclusions from drivers/gpu/. Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and drm_sarea.h). They are now #included via drmP.h and drm_crtc.h via a preceding patch. Without this patch and the patch to make include the UAPI headers from the core headers, after the UAPI split, the DRM C sources cannot find these UAPI headers because the DRM code relies on specific -I flags to make #include "..." work on headers in include/drm/ - but that does not work after the UAPI split without adding more -I flags. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NDave Airlie <airlied@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 13 9月, 2012 2 次提交
-
-
由 Inki Dae 提交于
do not align in page unit at dumb creation. the align is done by exynos_drm_gem_create() to be called commonly. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Thomas Meyer 提交于
The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 27 7月, 2012 5 次提交
-
-
由 Inki Dae 提交于
this patch corrects to deallocate the pages allocated already at alloc_page failure. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
this patch uses __free_page() to deallocate the pages allocated by alloc_page() and the pages doesn't need set_parge_dirty() and mark_page_accessed() because they aren't from page cache so removes them. this patch has a pair with previous patch below, http://www.spinics.net/lists/dri-devel/msg24382.html Changelog v2: remove unnecessary arguments. Changelog v3: fix npages type. - npages can have negative value. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
the region should be released by exporter once dmabuf's refcount becomes 0. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
shmem_read_mapping_page_gfp() first tries to allocate pages from page cache so if pages are allocated from page cache then these pages could have valid cache line. after that cpu may read garbage data from cache once gpu operation is completed with allocated pages. so with this patch, Non-contiguous memory allocation request allocates pages from highmem through alloc_page() with GFP_HIGHUSER_MOVABLE. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Cooper Yuan 提交于
Signed-off-by: NCooper Yuan <cooperyuan@gmail.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 05 6月, 2012 1 次提交
-
-
由 Laurent Pinchart 提交于
The exynos_drm_gem_dumb_map_offset() doesn't need to access any Exynos-specific GEM object fields, don't cast the GEM object. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 08 5月, 2012 3 次提交
-
-
由 Inki Dae 提交于
this patch adds a feature to get a gem buffer information and user application can get the gem buffer information simply in runtime through gem handle. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
this patch adds exynos specific codes for DRM Prime feature. with this patch, user application can get file descriptor from gem handle through DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl command(export) and also gem handle from file descriptor through DRM_IOCTL_PRIME_FD_TO_HANLDE(import) ioctl command. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
with this patch, user application can set cache attribute(such as cachable, writecombime or non-cachable) of the memory region allocated by gem framework. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 23 4月, 2012 3 次提交
-
-
由 Inki Dae 提交于
with this patch, if the memory region is physically non-continuous then VM_MIXEDMAP is set to vm->vm_flags otherwise VM_PFNMAP. we had missed this flag setting. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
this patch fixes the problem that the physical memory region to be mapped to user space could be exceeded. if page fault address was placed at between buffer start and end then memory region to be mapped would be exceeded. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
the gem was already allocated at gem allocation time but is allocated at page fault handler so this patch fixes the problem that gem was allocated one more time. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 21 4月, 2012 1 次提交
-
-
由 Linus Torvalds 提交于
This continues the theme started with vm_brk() and vm_munmap(): vm_mmap() does the same thing as do_mmap(), but additionally does the required VM locking. This uninlines (and rewrites it to be clearer) do_mmap(), which sadly duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have to export our internal do_mmap_pgoff() function. Some day we hopefully don't have to export do_mmap() either, if all modular users can become the simpler vm_mmap() instead. We're actually very close to that already, with the notable exception of the (broken) use in i810, and a couple of stragglers in binfmt_elf. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 4月, 2012 1 次提交
-
-
由 Inki Dae 提交于
1M section, 64k page count also should be rounded up so this patch rounds up them and caculates page count of them properly and also checks memory flags from user. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 20 3月, 2012 3 次提交
-
-
由 Joonyoung Shim 提交于
The exynos drm driver has several subdrv. They each can be module but it causes unfixed probe order of exynodr drm driver and each subdrv. It also needs some weird codes such as exynos_drm_fbdev_reinit and exynos_drm_mode_group_reinit. This patch can remove weird codes and clear codes through we doesn't modularity each subdrv. Also this removes unnecessary codes related module. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Inki Dae 提交于
this function would be used for drm based 2d acceleration driver to get/put dma address through gem handle. when exynos_drm_get_dma_address is called reference count of gem object would be increased not to be released by gem close and when exynos_drm_put_dma_address is called the reference count of this gem object would be decreased to be released. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Inki Dae 提交于
with this patch, we can allocate physically continuous or non-continuous memory and also it creates scatterlist for iommu support so allocated memory region can be mapped to iommu page table using scatterlist. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 05 3月, 2012 1 次提交
-
-
由 Dave Airlie 提交于
Talking to Al Viro on irc, we can see no possible reason for doing this, the upper mmap code does it. The code has been there since first import into drm tree I can find. Al tracked down this as a requirement pre 2.3.51 hasn't been needed since. Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 29 12月, 2011 3 次提交
-
-
由 Joonyoung Shim 提交于
exynos_drm_gem_create function created gem object with gem handle but it can be called externally without gem handle creation through this patch. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Joonyoung Shim 提交于
Make a fake mmap offset only when it needs. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Joonyoung Shim 提交于
This cleans codes of exynos gem - indents and order function and so on. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 17 11月, 2011 1 次提交
-
-
由 Seung-Woo Kim 提交于
- exynos_drm_buf_create() returns err pointer so NULL check is wrong. - Case that exynos_gem_obj is not created, destroy call in exception handle lable uses this pointer. so instead buffer is directly used. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 15 11月, 2011 2 次提交
-
-
由 Inki Dae 提交于
the purpose of this patch is to consider IOMMU support in the future. EXYNOS4 SoC supports IOMMU also so the address for DMA could be physical address with IOMMU or device address with IOMMU. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Inki Dae 提交于
this patch addes exynos_drm_gem_init() creating and initialzing a gem. allocation functions could use this function to create new gem and it changes size type of exynos_drm_gem_create structure to 64bit and also corrects comments to exynos_drm_gem_create structure. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 05 10月, 2011 1 次提交
-
-
由 Inki Dae 提交于
This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables only FIMD yet but we will add HDMI support also in the future. this patch is based on git repository below: git://people.freedesktop.org/~airlied/linux.git branch name: drm-next commit-id: 88ef4e3f you can refer to our working repository below: http://git.infradead.org/users/kmpark/linux-2.6-samsung branch name: samsung-drm We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c based on Linux framebuffer) but couldn't so because lowlevel codes of s3c-fb.c are included internally and so FIMD module of this driver has its own lowlevel codes. We used GEM framework for buffer management and DMA APIs(dma_alloc_*) for buffer allocation so we can allocate physically continuous memory for DMA through it and also we could use CMA later if CMA is applied to mainline. Refer to this link for CMA(Continuous Memory Allocator): http://lkml.org/lkml/2011/7/20/45 this driver supports only physically continuous memory(non-iommu). Links to previous versions of the patchset: v1: < https://lwn.net/Articles/454380/ > v2: < http://www.spinics.net/lists/kernel/msg1224275.html > v3: < http://www.spinics.net/lists/dri-devel/msg13755.html > v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 > v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 > Changelog v2: DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command. this feature maps user address space to physical memory region once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl. DRM: code clean and add exception codes. Changelog v3: DRM: Support multiple irq. FIMD and HDMI have their own irq handler but DRM Framework can regiter only one irq handler this patch supports mutiple irq for Samsung SoC. DRM: Consider modularization. each DRM, FIMD could be built as a module. DRM: Have indenpendent crtc object. crtc isn't specific to SoC Platform so this patch gets a crtc to be used as common object. created crtc could be attached to any encoder object. DRM: code clean and add exception codes. Changelog v4: DRM: remove is_defult from samsung_fb. is_default isn't used for default framebuffer. DRM: code refactoring to fimd module. this patch is be considered with multiple display objects and would use its own request_irq() to register a irq handler instead of drm framework's one. DRM: remove find_samsung_drm_gem_object() DRM: move kernel private data structures and definitions to driver folder. samsung_drm.h would contain only public information for userspace ioctl interface. DRM: code refactoring to gem modules. buffer module isn't dependent of gem module anymore. DRM: fixed security issue. DRM: remove encoder porinter from specific connector. samsung connector doesn't need to have generic encoder. DRM: code clean and add exception codes. Changelog v5: DRM: updated fimd(display controller) driver. added various pixel formats, color key and pixel blending features. DRM: removed end_buf_off from samsung_drm_overlay structure. this variable isn't used and end buffer address would be calculated by each sub driver. DRM: use generic function for mmap_offset. replaced samsung_drm_gem_create_mmap_offset() and samsung_drm_free_mmap_offset() with generic ones applied to mainline recentrly. DRM: removed unnecessary codes and added exception codes. DRM: added comments and code clean. Changelog v6: DRM: added default config options. DRM: added padding for 64-bit align. DRM: changed prefix 'samsung' to 'exynos' Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-