- 14 12月, 2015 30 次提交
-
-
由 Aneesh Kumar K.V 提交于
The slot information of base page size hash pte is stored in the pgtable_t w.r.t transparent hugepage. We need to make sure we don't index beyond pgtable_t size. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This will bulk read 4 hash pte slot entries and should reduce the loop Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Remove the related functions and #defines Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
They don't need to track 4k subpage slot details and hence don't need second half of pgtable_t. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Use the #define instead of open-coding the same Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
pte and pmd table size are dependent on config items. Don't hard code the same. This make sure we use the right value when masking pmd entries and also while checking pmd_bad Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
For a pte entry we will have _PAGE_PTE set. Our pte page address have a minimum alignment requirement of HUGEPD_SHIFT_MASK + 1. We use the lower 7 bits to indicate hugepd. ie. For pmd and pgd we can find: 1) _PAGE_PTE set pte -> indicate PTE 2) bits [2..6] non zero -> indicate hugepd. They also encode the size. We skip bit 1 (_PAGE_PRESENT). 3) othewise pointer to next table. Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We support THP only with book3s_64 and 64K page size. Move THP details to hash64-64k.h to clarify the same. Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
W.r.t hugetlb, we support two format for pmd. With book3s_64 and 64K linux page size, we can have pte at the pmd level. Hence we don't need to support hugepd there. For everything else hugepd is supported and pmd_huge is (0). Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Only difference here is, we apply the WIMG mapping early, so rflags passed to updatepp will also be changed. Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Instead of open coding it in multiple code paths, export the helper and add more documentation. Also make sure we don't make assumption regarding pte bit position Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This is similar to 64K insert. May be we want to consolidate Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Convert from asm to C Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
No real change, only style changes Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This free up 11 bits in pte_t. In the later patch we also change the pte_t format so that we can start supporting migration pte at pmd level. We now track 4k subpage valid bit as below If we have _PAGE_COMBO set, we override the _PAGE_F_GIX_SHIFT and _PAGE_F_SECOND. Together we have 4 bits, each of them used to indicate whether any of the 4 4k subpage in that group is valid. ie, [ group 1 bit ] [ group 2 bit ] ..... [ group 4 ] [ subpage 1 - 4] [ subpage 5- 8] ..... [ subpage 13 - 16] We still track each 4k subpage slot number and secondary hash information in the second half of pgtable_t. Removing the subpage tracking have some significant overhead on aim9 and ebizzy benchmark and to support THP with 4K subpage, we do need a pgtable_t of 4096 bytes. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We should not expect pte bit position in asm code. Simply by moving part of that to C Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Move the booke related headers below booke/32 or booke/64 Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
functions which operate on pte bits are moved to hash*.h and other generic functions are moved to pgtable.h Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This enables us to keep hash64 related bits together, and makes it easy to follow. Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We convert them static inline function here as we did with pte_val in the previous patch Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We also convert few #define to static inline in this patch for better type checking Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We copy only needed PTE bits define from pte-common.h to respective hash related header. This should greatly simply later patches in which we are going to change the pte format for hash config Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We are going to drop pte_common.h in the later patch. The idea is to enable hash code not require to define all PTE bits. Having PTE bits defined in pte_common.h made the code unnecessarily complex. Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We also move __ASSEMBLY__ towards the end of header. This avoid having #ifndef __ASSEMBLY___ all over the header Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This further make a copy of pte defines to book3s/64/hash*.h. This remove the dependency on pgtable-ppc64-4k.h and pgtable-ppc64-64k.h Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
In this patch we do: cp pgtable-ppc32.h book3s/32/pgtable.h cp pgtable-ppc64.h book3s/64/pgtable.h This enable us to do further changes to hash specific config. We will change the page table format for 64bit hash in later patches. Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This is the same bug we fixed as part of 09567e7f ("powerpc/mm: Check paca psize is up to date for huge mappings"). Please check that for details. The difference here is that faults were happening on a 4K page at an address previously mapped by hugetlb. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 10 12月, 2015 3 次提交
-
-
由 Anton Blanchard 提交于
Two DSCR tests have a hack in them: /* * XXX: Force a context switch out so that DSCR * current value is copied into the thread struct * which is required for the child to inherit the * changed value. */ sleep(1); We should not be working around this in the testcase, it is a kernel bug. Fix it by copying the current DSCR to the child, instead of what we had in the thread struct at last context switch. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
commit 152d523e ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") moved the restore of SPRs after the call to _switch(). There is an issue with this approach - new tasks do not return through _switch(), they are set up by copy_thread() to directly return through ret_from_fork() or ret_from_kernel_thread(). This means restore_sprs() is not getting called for new tasks. Fix this by moving restore_sprs() before _switch(). Fixes: 152d523e ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
Commit a0e72cf1 ("powerpc: Create msr_check_and_{set,clear}()") removed a call to check_if_tm_restore_required() in the enable_kernel_*() functions. Add them back in. Fixes: a0e72cf1 ("powerpc: Create msr_check_and_{set,clear}()") Reported-by: NRashmica Gupta <rashmicy@gmail.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 02 12月, 2015 4 次提交
-
-
由 Anton Blanchard 提交于
Remove a bunch of unnecessary fallback functions and group things in a more logical way. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
Most of __switch_to() is housekeeping, TLB batching, timekeeping etc. Move these away from the more complex and critical context switching code. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
Create a single function that flushes everything (FP, VMX, VSX, SPE). Doing this all at once means we only do one MSR write. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
Create a single function that gives everything up (FP, VMX, VSX, SPE). Doing this all at once means we only do one MSR write. A context switch microbenchmark using yield(): http://ozlabs.org/~anton/junkcode/context_switch2.c ./context_switch2 --test=yield --fp --altivec --vector 0 0 shows an improvement of 3% on POWER8. Signed-off-by: NAnton Blanchard <anton@samba.org> [mpe: giveup_all() needs to be EXPORT_SYMBOL'ed] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 01 12月, 2015 3 次提交
-
-
由 Anton Blanchard 提交于
More consolidation of our MSR available bit handling. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
Add a boot option that strictly manages the MSR unavailable bits. This catches kernel uses of FP/Altivec/SPE that would otherwise corrupt user state. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
The enable_kernel_*() functions leave the relevant MSR bits enabled until we exit the kernel sometime later. Create disable versions that wrap the kernel use of FP, Altivec VSX or SPE. While we don't want to disable it normally for performance reasons (MSR writes are slow), it will be used for a debug boot option that does this and catches bad uses in other areas of the kernel. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-