pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   3090	    912	      0	   4002	    fa2	realtek/rtlwifi/rtl8188ee/sw.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   3154	    848	      0	   4002	    fa2	realtek/rtlwifi/rtl8188ee/sw.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   3032	    912	      0	   3944	    f68	realtek/rtlwifi/rtl8723be/sw.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   3096	    848	      0	   3944	    f68	realtek/rtlwifi/rtl8723be/sw.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2775	    912	      0	   3687	    e67	realtek/rtlwifi/rtl8723ae/sw.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2839	    848	      0	   3687	    e67	realtek/rtlwifi/rtl8723ae/sw.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2491	    960	      0	   3451	    d7b	realtek/rtlwifi/rtl8821ae/sw.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2587	    864	      0	   3451	    d7b	realtek/rtlwifi/rtl8821ae/sw.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2817	   1040	      0	   3857	    f11 realtek/rtlwifi/rtl8192se/sw.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   3009	    848	      0	   3857	    f11 realtek/rtlwifi/rtl8192se/sw.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2833	    945	     12	   3790	    ece realtek/rtlwifi/rtl8192de/sw.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2929	    849	     12	   3790	    ece realtek/rtlwifi/rtl8192de/sw.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

As the only caller of dma_supported() outside of DMA API internals, the
qtfnmac driver stands out and invites scrutiny. Thankfully, it's not
being used for evil, but it is entirely redundant, since it open-codes a
check that the DMA mask setting functions are going to perform anyway.
In fact, the whole qtnf_pcie_init_dma_mask() function is nothing more
than a rather long-winded implementation of dma_set_mask_and_coherent(),
so let's just use that directly.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Modify qlink command structures and interface types handling
to prepare adding AP_VLAN support to qtnfmac driver.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

This function is not used anymore, so remove it.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Firmware sends supported interface type rather than mask. As a result,
types field of ieee80211_iface_limit structure may end up having
multiple iftype bits set. This leads to WARN_ON from
wiphy_verify_combinations.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Userspace tools may hang on scan in the case when scan completion event
is not returned by firmware. This patch implements the scan timeout
to avoid such situation.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

This patch implements cfg80211 channel_switch handler enabling CSA
channel-switch procedure.

Driver performs only basic validation of the requested new channel
and then sends command to firmware. Beacon IEs are not sent since
beacon update is handled by firmware.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Wireless cfg80211 core supplies channel settings in cfg80211_ap_settings
structure for each BSS in multiple BSS configuration. On the other hand
all the virtual interfaces on one radio are using the same PHY settings
including channel.

Move chandef structure from vif to mac structure in order to mantain
the only instance of cfg80211_chan_def structure in qtnf_wmac
rather than its multiple copies in qtnf_vif.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Use proper endianness conversion for client station leave reason.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Implement current channel reporting functionality. Current operating
channel can be obtained either directly using cfg80211 get_channel
callback or from stats reported by cfg80211 survey_dump callback.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

This patch implements cfg80211 dump_survey handler enabling
per-channel survey data reports.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Add missing bus lock into get_mac_chan_info command.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Regdomain information needs to be registered with cfg80211
for devices with REGULATORY_WIPHY_SELF_MANAGED flag set.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

On startup driver obtains regulatory rules from firmware and
enables them during wiphy registration. Later on regulatory
domain change can be requested by host. In this case firmware
is notified about the upcoming changes. If the change is valid,
then firmware updates hardware channel configuration and host
driver receives updated channel info for each band.
Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: NSergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: NAvinash Patil <avinashp@quantenna.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Commit f70e4df2 ("rtlwifi: Add code to read new versions of
firmware") added code to load an old firmware file if the new one is
not available.  Unfortunately that code is never reached because
request_firmware_nowait() does not wait for the firmware to show up
and returns 0 even if the file is not there.

Use the existing fallback mechanism introduced by commit 62009b7f
("rtlwifi: rtl8192cu: Add new firmware") instead.

Fixes: f70e4df2 ("rtlwifi: Add code to read new versions of firmware")
Cc: stable@vger.kernel.org
Signed-off-by: NSven Joachim <svenjoac@gmx.de>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

It is observed that some IEs get missed during association.
This patch correct the old IE parse code. sme->ie will be
store as wpa ie, wps ie, wapi ie and gen ie accordingly.
Signed-off-by: NXinming Hu <huxm@marvell.com>
Signed-off-by: NCathy Luo <cluo@marvell.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

_rtl_pci_find_adapter fail path will jump to label fail3 for
unsupported adapter types.

However, on course for fail3 there will be call rtl_deinit_core
before rtl_init_core.

For the inclusion of checking pci_iounmap this fail can be moved to
fail2.

Fixes
[    4.492963] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi]
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Merge tag 'iwlwifi-next-for-kalle-2017-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

First batch of iwlwifi patches for 4.14

* Reorganization of the code into separate directories continues;
* A couple of new minor features;
* Fixes and cleanups here and there.

We already have a such a pointer.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

All the firmware versions the driver supports enable DQA, and thus
the only way to get non-DQA mode is to modify the source. Remove
this mode to simplify the code.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The iwl_mvm_add_bcast_sta() and the iwl_mvm_rm_bcast_sta() functions
are only called in P2P flows.  Add _p2p_ to the function names to make
this explicit.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

There's no need to spell out the cases when we can just
use ieee80211_is_bufferable_mmpdu().
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Since the TXQ timer freeze code will not properly handle the
large TVQM queue numbers, warn if we get into that code when
we have TVQM. Also, just to catch this earlier, warn if the
firmware image doesn't support AP_LINK_PS but we're running
on HW using TVQM.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Rename this function to the more appropriate iwl_pcie_check_hw_rf_kill()
since it's only a function in the pcie code and cannot be called from
any other place.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

For testing purposes, we may want to disable EBS scans at compile time.
Signed-off-by: NRoee Zamir <roee.zamir@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

During init, the FW checks whether the FSEQ value matches what it
expects.  If it doesn't match, we print a warning to let integrators
clearly know that something is wrong.  This can happen if another core
(i.e. not WiFi) has updated the FSEQ version.  This notification is
only sent by the FW in production, for development firmwares, an
assertion is triggered instead.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NMordechai Goodstein <mordechay.goodstein@intel.com>

If the OTP is empty, the NVM_GET_INFO command returns
with flags' bit(0) on. This means the FW returns the
default values for working with. This is allowed, so
use this returned data.

Fixes: e9e1ba3d ("iwlwifi: mvm: support getting nvm data from firmware")
Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The return status check of iwl_pcie_gen2_build_amsdu
was buggy. Fix it.

Fixes: 6ffe5de3 ("iwlwifi: pcie: add AMSDU to gen2")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

While waiting for queues to empty,
If txq_id == IWL_MVM_INVALID_QUEUE for all txq_ids,
ret is used uninitialized.
Found by Klocwork.

Fixes: d6d517b7 ("iwlwifi: add wait for tx queue empty")
Signed-off-by: NSharon Dvir <sharon.dvir@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The FIFO numbering is different in A000 devices. This
means that we routed BE packets to BK FIFO. Fix this.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We currently support 3 different versions of the beacon template
command and the code does some tricks in order to reuse what is
possible across these versions.  But it is a bit complicated to read
and soon there will be one more variation that the driver needs
implement, which would complicate it even further.

Refactor the way we send beacon template commands, which increases the
code size a bit, but makes it much easier to read.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Those constants have been unused for quite some time now.
Signed-off-by: NSeraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Convention has it to byte-swap the constant instead of the variable
when doing bit checks. This also generates better code when the swap
is actually needed, since the constant can be swapped at compile-time.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

There are two workarounds because RSS is currently broken on A000
devices due to firmware issues, but checking for the new TX API
doesn't really make sense. Check the hardware family instead of
the new TX API - there's nothing better to check since it's just
a temporary workaround.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

This may need to be refined later, but for now using this,
even with the TODO, is better than checking "has new TX API".
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>