- 05 8月, 2016 1 次提交
-
-
由 Rafael J. Wysocki 提交于
* acpi-ec: ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx * acpi-button: ACPI / button: remove pointer to old lid_sysfs on unbind
-
- 04 8月, 2016 1 次提交
-
-
由 Lv Zheng 提交于
A regression is caused by the following commit: Commit: 02b771b6 Subject: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations In this commit, using system workqueue causes that the maximum parallel executions of _Qxx can exceed 255. This violates the method reentrancy limit in ACPICA and generates the following error log: ACPI Error: Method reached maximum reentrancy limit (255) (20150818/dsmethod-341) This patch creates a seperate workqueue and limits the number of parallel _Qxx evaluations down to a configurable value (can be tuned against number of online CPUs). Since EC events are handled after driver probe, we can create the workqueue in acpi_ec_init(). Fixes: 02b771b6 (ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations) Link: https://bugzilla.kernel.org/show_bug.cgi?id=135691 Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Reported-and-tested-by: NHelen Buus <ubuntu@hbuus.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 03 8月, 2016 1 次提交
-
-
由 Benjamin Tissoires 提交于
When we removed the procfs dir on error or if the driver is unbound, the two variables acpi_lid_dir and acpi_button_dir were not reset. On the next rebind, those static variables were not null and we couldn't re-register the device again. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 27 7月, 2016 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI updates from Rafael Wysocki: "The new feaures here are the support for ACPI overlays (allowing ACPI tables to be loaded at any time from EFI variables or via configfs) and the LPI (Low-Power Idle) support. Also notable is the ACPI-based NUMA support for ARM64. Apart from that we have two new drivers, for the DPTF (Dynamic Power and Thermal Framework) power participant device and for the Intel Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for the Boot Error Record Table (BERT) in APEI and support for platform-initiated graceful shutdown. Plus two new pieces of documentation and usual assorted fixes and cleanups in quite a few places. Specifics: - Support for ACPI SSDT overlays allowing Secondary System Description Tables (SSDTs) to be loaded at any time from EFI variables or via configfs (Octavian Purdila, Mika Westerberg). - Support for the ACPI LPI (Low-Power Idle) feature introduced in ACPI 6.0 and allowing processor idle states to be represented in ACPI tables in a hierarchical way (with the help of Processor Container objects) and support for ACPI idle states management on ARM64, based on LPI (Sudeep Holla). - General improvements of ACPI support for NUMA and ARM64 support for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter). - General improvements of the ACPI table upgrade mechanism and ARM64 support for that feature (Aleksey Makarov, Jon Masters). - Support for the Boot Error Record Table (BERT) in APEI and improvements of kernel messages printed by the error injection code (Huang Ying, Borislav Petkov). - New driver for the Intel Broxton WhiskeyCove PMIC operation region and support for the REGS operation region on Broxton, PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker). - New driver for the power participant device which is part of the Dynamic Power and Thermal Framework (DPTF) and DPTF-related code reorganization (Srinivas Pandruvada). - Support for the platform-initiated graceful shutdown feature introduced in ACPI 6.1 (Prashanth Prakash). - ACPI button driver update related to lid input events generated automatically on initialization and system resume that have been problematic for some time (Lv Zheng). - ACPI EC driver cleanups (Lv Zheng). - Documentation of the ACPICA release automation process and the in-kernel ACPI AML debugger (Lv Zheng). - New blacklist entry and two fixes for the ACPI backlight driver (Alex Hung, Arvind Yadav, Ralf Gerbig). - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker). - ACPI CPPC code changes to make it more robust against possible defects in ACPI tables and new symbol definitions for PCC (Hoan Tran). - System reboot code modification to execute the ACPI _PTS (Prepare To Sleep) method in addition to _TTS (Ocean He). - ACPICA-related change to carry out lock ordering checks in ACPICA if ACPICA debug is enabled in the kernel (Lv Zheng). - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He, Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)" * tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE ACPI / DPTF: move int340x_thermal.c to the DPTF folder ACPI / DPTF: Add DPTF power participant driver ACPI / lpat: make it explicitly non-modular ACPI / dock: make dock explicitly non-modular ACPI / PCI: make pci_slot explicitly non-modular ACPI / PMIC: remove modular references from non-modular code ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel ACPI: Rename configfs.c to acpi_configfs.c to prevent link error ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation ACPI: add support for loading SSDTs via configfs ACPI: add support for configfs efi / ACPI: load SSTDs from EFI variables ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management updates from Rafael Wysocki: "Again, the majority of changes go into the cpufreq subsystem, but there are no big features this time. The cpufreq changes that stand out somewhat are the governor interface rework and improvements related to the handling of frequency tables. Apart from those, there are fixes and new device/CPU IDs in drivers, cleanups and an improvement of the new schedutil governor. Next, there are some changes in the hibernation core, including a fix for a nasty problem related to the MONITOR/MWAIT usage by CPU offline during resume from hibernation, a few core improvements related to memory management during resume, a couple of additional debug features and cleanups. Finally, we have some fixes and cleanups in the devfreq subsystem, generic power domains framework improvements related to system suspend/resume, support for some new chips in intel_idle and in the power capping RAPL driver, a new version of the AnalyzeSuspend utility and some assorted fixes and cleanups. Specifics: - Rework the cpufreq governor interface to make it more straightforward and modify the conservative governor to avoid using transition notifications (Rafael Wysocki). - Rework the handling of frequency tables by the cpufreq core to make it more efficient (Viresh Kumar). - Modify the schedutil governor to reduce the number of wakeups it causes to occur in cases when the CPU frequency doesn't need to be changed (Steve Muckle, Viresh Kumar). - Fix some minor issues and clean up code in the cpufreq core and governors (Rafael Wysocki, Viresh Kumar). - Add Intel Broxton support to the intel_pstate driver (Srinivas Pandruvada). - Fix problems related to the config TDP feature and to the validity of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka, Srinivas Pandruvada). - Make intel_pstate update the cpu_frequency tracepoint even if the frequency doesn't change to avoid confusing powertop (Rafael Wysocki). - Clean up the usage of __init/__initdata in intel_pstate, mark some of its internal variables as __read_mostly and drop an unused structure element from it (Jisheng Zhang, Carsten Emde). - Clean up the usage of some duplicate MSR symbols in intel_pstate and turbostat (Srinivas Pandruvada). - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay Adiga, Viresh Kumar, Ben Dooks). - Fix a regression (introduced during the 4.5 cycle) in the pcc-cpufreq driver by reverting the problematic commit (Andreas Herrmann). - Add support for Intel Denverton to intel_idle, clean up Broxton support in it and make it explicitly non-modular (Jacob Pan, Jan Beulich, Paul Gortmaker). - Add support for Denverton and Ivy Bridge server to the Intel RAPL power capping driver and make it more careful about the handing of MSRs that may not be present (Jacob Pan, Xiaolong Wang). - Fix resume from hibernation on x86-64 by making the CPU offline during resume avoid using MONITOR/MWAIT in the "play dead" loop which may lead to an inadvertent "revival" of a "dead" CPU and a page fault leading to a kernel crash from it (Rafael Wysocki). - Make memory management during resume from hibernation more straightforward (Rafael Wysocki). - Add debug features that should help to detect problems related to hibernation and resume from it (Rafael Wysocki, Chen Yu). - Clean up hibernation core somewhat (Rafael Wysocki). - Prevent KASAN from instrumenting the hibernation core which leads to large numbers of false-positives from it (James Morse). - Prevent PM (hibernate and suspend) notifiers from being called during the cleanup phase if they have not been called during the corresponding preparation phase which is possible if one of the other notifiers returns an error at that time (Lianwei Wang). - Improve suspend-related debug printout in the tasks freezer and clean up suspend-related console handling (Roger Lu, Borislav Petkov). - Update the AnalyzeSuspend script in the kernel sources to version 4.2 (Todd Brandt). - Modify the generic power domains framework to make it handle system suspend/resume better (Ulf Hansson). - Make the runtime PM framework avoid resuming devices synchronously when user space changes the runtime PM settings for them and improve its error reporting (Rafael Wysocki, Linus Walleij). - Fix error paths in devfreq drivers (exynos, exynos-ppmu, exynos-bus) and in the core, make some devfreq code explicitly non-modular and change some of it into tristate (Bartlomiej Zolnierkiewicz, Peter Chen, Paul Gortmaker). - Add DT support to the generic PM clocks management code and make it export some more symbols (Jon Hunter, Paul Gortmaker). - Make the PCI PM core code slightly more robust against possible driver errors (Andy Shevchenko). - Make it possible to change DESTDIR and PREFIX in turbostat (Andy Shevchenko)" * tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency" PM / hibernate: Introduce test_resume mode for hibernation cpufreq: export cpufreq_driver_resolve_freq() cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index() PCI / PM: check all fields in pci_set_platform_pm() cpufreq: acpi-cpufreq: use cached frequency mapping when possible cpufreq: schedutil: map raw required frequency to driver frequency cpufreq: add cpufreq_driver_resolve_freq() cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT intel_pstate: Update cpu_frequency tracepoint every time cpufreq: intel_pstate: clean remnant struct element PM / tools: scripts: AnalyzeSuspend v4.2 x86 / hibernate: Use hlt_play_dead() when resuming from hibernation cpufreq: powernv: Replacing pstate_id with frequency table index intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate() PM / hibernate: Image data protection during restoration PM / hibernate: Add missing braces in __register_nosave_region() PM / hibernate: Clean up comments in snapshot.c PM / hibernate: Clean up function headers in snapshot.c PM / hibernate: Add missing braces in hibernate_setup() ...
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x8 platform driver updates from Darren Hart: "Several new quirks and tweaks for new platforms to existing laptop drivers. A new ACPI virtual power button driver, similar to the intel-hid driver. A rework of the dell keymap, using a single sparse keymap for all machines. A few fixes and cleanups. Summary: intel-vbtn: - new driver for Intel Virtual Button intel_pmc_core: - Convert to DEFINE_DEBUGFS_ATTRIBUTE fujitsu-laptop: - Rework brightness of eco led asus-wmi: - Add quirk_no_rfkill_wapf4 for the Asus X456UA - Add quirk_no_rfkill_wapf4 for the Asus X456UF - Add quirk_no_rfkill for the Asus Z550MA - Add quirk_no_rfkill for the Asus U303LB - Add quirk_no_rfkill for the Asus N552VW - Create quirk for airplane_mode LED - Add ambient light sensor toggle key asus-wireless: - Toggle airplane mode LED intel_telemetry: - Remove Monitor MWAIT feature dependency intel-hid: - Remove duplicated acpi_remove_notify_handler fujitsu-laptop: - Add support for eco LED - Support touchpad toggle hotkey on Skylake-based models - Remove unused macros - Use module name in debug messages hp-wmi: - Fix wifi cannot be hard-unblocked toshiba_acpi: - Bump driver version and update copyright year - Remove the position sysfs entry - Add IIO interface for accelerometer axis data dell-wmi: - Add a WMI event code for display on/off - Generate one sparse keymap for all machines - Add information about other WMI event codes - Sort WMI event codes and update comments - Ignore WMI event code 0xe045" * tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (26 commits) intel-vbtn: new driver for Intel Virtual Button intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE fujitsu-laptop: Rework brightness of eco led asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF asus-wmi: Add quirk_no_rfkill for the Asus Z550MA asus-wmi: Add quirk_no_rfkill for the Asus U303LB asus-wmi: Add quirk_no_rfkill for the Asus N552VW asus-wmi: Create quirk for airplane_mode LED asus-wireless: Toggle airplane mode LED intel_telemetry: Remove Monitor MWAIT feature dependency intel-hid: Remove duplicated acpi_remove_notify_handler asus-wmi: Add ambient light sensor toggle key fujitsu-laptop: Add support for eco LED fujitsu-laptop: Support touchpad toggle hotkey on Skylake-based models fujitsu-laptop: Remove unused macros fujitsu-laptop: Use module name in debug messages hp-wmi: Fix wifi cannot be hard-unblocked toshiba_acpi: Bump driver version and update copyright year toshiba_acpi: Remove the position sysfs entry ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper updates from Mike Snitzer: - initially based on Jens' 'for-4.8/core' (given all the flag churn) and later merged with 'for-4.8/core' to pickup the QUEUE_FLAG_DAX commits that DM depends on to provide its DAX support - clean up the bio-based vs request-based DM core code by moving the request-based DM core code out to dm-rq.[hc] - reinstate bio-based support in the DM multipath target (done with the idea that fast storage like NVMe over Fabrics could benefit) -- while preserving support for request_fn and blk-mq request-based DM mpath - SCSI and DM multipath persistent reservation fixes that were coordinated with Martin Petersen. - the DM raid target saw the most extensive change this cycle; it now provides reshape and takeover support (by layering ontop of the corresponding MD capabilities) - DAX support for DM core and the linear, stripe and error targets - a DM thin-provisioning block discard vs allocation race fix that addresses potential for corruption - a stable fix for DM verity-fec's block calculation during decode - a few cleanups and fixes to DM core and various targets * tag 'dm-4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (73 commits) dm: allow bio-based table to be upgraded to bio-based with DAX support dm snap: add fake origin_direct_access dm stripe: add DAX support dm error: add DAX support dm linear: add DAX support dm: add infrastructure for DAX support dm thin: fix a race condition between discarding and provisioning a block dm btree: fix a bug in dm_btree_find_next_single() dm raid: fix random optimal_io_size for raid0 dm raid: address checkpatch.pl complaints dm: call PR reserve/unreserve on each underlying device sd: don't use the ALL_TG_PT bit for reservations dm: fix second blk_delay_queue() parameter to be in msec units not jiffies dm raid: change logical functions to actually return bool dm raid: use rdev_for_each in status dm raid: use rs->raid_disks to avoid memory leaks on free dm raid: support delta_disks for raid1, fix table output dm raid: enhance reshape check and factor out reshape setup dm raid: allow resize during recovery dm raid: fix rs_is_recovering() to allow for lvextend ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: "libata saw quite a bit of activities in this cycle: - SMR drive support still being worked on - bug fixes and improvements to misc SCSI command emulation - some low level driver updates" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits) libata-scsi: better style in ata_msense_*() AHCI: Clear GHC.IS to prevent unexpectly asserting INTx ata: sata_dwc_460ex: remove redundant dev_err call ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_* libata: remove ATA_PROT_FLAG_DATA libata: remove ata_is_nodata ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48} libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat libata-scsi: Fix ZBC management out command translation libata-scsi: Fix translation of REPORT ZONES command ata: Handle ATA NCQ NO-DATA commands correctly libata-eh: decode all taskfile protocols ata: fixup ATA_PROT_NODATA libsas: use ata_is_ncq() and ata_has_dma() accessors libata: use ata_is_ncq() accessors libata: return boolean values from ata_is_* libata-scsi: avoid repeated calculation of number of TRIM ranges libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control() libata-scsi: fix D_SENSE bit relection in control mode page ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup updates from Tejun Heo: "Nothing too exciting. - updates to the pids controller so that pid limit breaches can be noticed and monitored from userland. - cleanups and non-critical bug fixes" * 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: remove duplicated include from cgroup.c cgroup: Use lld instead of ld when printing pids controller events_limit cgroup: Add pids controller event when fork fails because of pid limit cgroup: allow NULL return from ss->css_alloc() cgroup: remove unnecessary 0 check from css_from_id() cgroup: fix idr leak for the first cgroup root
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.8: API: - first part of skcipher low-level conversions - add KPP (Key-agreement Protocol Primitives) interface. Algorithms: - fix IPsec/cryptd reordering issues that affects aesni - RSA no longer does explicit leading zero removal - add SHA3 - add DH - add ECDH - improve DRBG performance by not doing CTR by hand Drivers: - add x86 AVX2 multibuffer SHA256/512 - add POWER8 optimised crc32c - add xts support to vmx - add DH support to qat - add RSA support to caam - add Layerscape support to caam - add SEC1 AEAD support to talitos - improve performance by chaining requests in marvell/cesa - add support for Araneus Alea I USB RNG - add support for Broadcom BCM5301 RNG - add support for Amlogic Meson RNG - add support Broadcom NSP SoC RNG" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits) crypto: vmx - Fix aes_p8_xts_decrypt build failure crypto: vmx - Ignore generated files crypto: vmx - Adding support for XTS crypto: vmx - Adding asm subroutines for XTS crypto: skcipher - add comment for skcipher_alg->base crypto: testmgr - Print akcipher algorithm name crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op crypto: nx - off by one bug in nx_of_update_msc() crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: scatterwalk - Inline start/map/done crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone crypto: scatterwalk - Fix test in scatterwalk_done crypto: api - Optimise away crypto_yield when hard preemption is on crypto: scatterwalk - add no-copy support to copychunks crypto: scatterwalk - Remove scatterwalk_bytes_sglen crypto: omap - Stop using crypto scatterwalk_bytes_sglen crypto: skcipher - Remove top-level givcipher interface crypto: user - Remove crypto_lookup_skcipher call crypto: cts - Convert to skcipher ...
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull documentation updates from Jonathan Corbet: "Some big changes this month, headlined by the addition of a new formatted documentation mechanism based on the Sphinx system. The objectives here are to make it easier to create better-integrated (and more attractive) documents while (eventually) dumping our one-of-a-kind, cobbled-together system for something that is widely used and maintained by others. There's a fair amount of information what's being done, why, and how to use it in: https://lwn.net/Articles/692704/ https://lwn.net/Articles/692705/ Closer to home, Documentation/kernel-documentation.rst describes how it works. For now, the new system exists alongside the old one; you should soon see the GPU documentation converted over in the DRM pull and some significant media conversion work as well. Once all the docs have been moved over and we're convinced that the rough edges (of which are are a few) have been smoothed over, the DocBook-based stuff should go away. Primary credit is to Jani Nikula for doing the heavy lifting to make this stuff actually work; there has also been notable effort from Markus Heiser, Daniel Vetter, and Mauro Carvalho Chehab. Expect a couple of conflicts on the new index.rst file over the course of the merge window; they are trivially resolvable. That file may be a bit of a conflict magnet in the short term, but I don't expect that situation to last for any real length of time. Beyond that, of course, we have the usual collection of tweaks, updates, and typo fixes" * tag 'docs-for-linus' of git://git.lwn.net/linux: (77 commits) doc-rst: kernel-doc: fix handling of address_space tags Revert "doc/sphinx: Enable keep_warnings" doc-rst: kernel-doc directive, fix state machine reporter docs: deprecate kernel-doc-nano-HOWTO.txt doc/sphinx: Enable keep_warnings Documentation: add watermark_scale_factor to the list of vm systcl file kernel-doc: Fix up warning output docs: Get rid of some kernel-documentation warnings doc-rst: add an option to ignore DocBooks when generating docs workqueue: Fix a typo in workqueue.txt Doc: ocfs: Fix typo in filesystems/ocfs2-online-filecheck.txt Documentation/sphinx: skip build if user requested specific DOCBOOKS Documentation: add cleanmediadocs to the documentation targets Add .pyc files to .gitignore Doc: PM: Fix a typo in intel_powerclamp.txt doc-rst: flat-table directive - initial implementation Documentation: add meta-documentation for Sphinx and kernel-doc Documentation: tiny typo fix in usb/gadget_multi.txt Documentation: fix wrong value in md.txt bcache: documentation formatting, edited for clarity, stripe alignment notes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "There are a couple of new things for s390 with this merge request: - a new scheduling domain "drawer" is added to reflect the unusual topology found on z13 machines. Performance tests showed up to 8 percent gain with the additional domain. - the new crc-32 checksum crypto module uses the vector-galois-field multiply and sum SIMD instruction to speed up crc-32 and crc-32c. - proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in the generic vmlinux.lds linker script definitions. - kcov instrumentation support. A prerequisite for that is the inline assembly basic block cleanup, which is the reason for the net/iucv/iucv.c change. - support for 2GB pages is added to the hugetlbfs backend. Then there are two removals: - the oprofile hardware sampling support is dead code and is removed. The oprofile user space uses the perf interface nowadays. - the ETR clock synchronization is removed, this has been superseeded be the STP clock synchronization. And it always has been "interesting" code.. And the usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits) s390/pci: Delete an unnecessary check before the function call "pci_dev_put" s390/smp: clean up a condition s390/cio/chp : Remove deprecated create_singlethread_workqueue s390/chsc: improve channel path descriptor determination s390/chsc: sanitize fmt check for chp_desc determination s390/cio: make fmt1 channel path descriptor optional s390/chsc: fix ioctl CHSC_INFO_CU command s390/cio/device_ops: fix kernel doc s390/cio: allow to reset channel measurement block s390/console: Make preferred console handling more consistent s390/mm: fix gmap tlb flush issues s390/mm: add support for 2GB hugepages s390: have unique symbol for __switch_to address s390/cpuinfo: show maximum thread id s390/ptrace: clarify bits in the per_struct s390: stack address vs thread_info s390: remove pointless load within __switch_to s390: enable kcov support s390/cpumf: use basic block for ecctr inline assembly s390/hypfs: use basic block for diag inline assembly ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM leftovers from Radim Krčmář: "This is a combination of two pull requests for 4.7-rc8 that were not merged due to looking hairy. I have changed the tag message to focus on circumstances of contained reverts as they were likely the reason behind rejection. This merge introduces three patches that are later reverted, - Switching of MSR_TSC_AUX in SVM was thought to cause a host misbehavior, but it was later cleared of those doubts and the patch moved code to a hot path, so we reverted it. That patch also needed a fix for 32 bit builds and both were reverted in one go. - Al Viro noticed that a fix for a leak in an error path was not valid with the given API and provided a better fix, so the original patch was reverted. Then there are two VMX fixes that move code around because VMCS was not accessed between vcpu_load() and vcpu_put(), a simple ARM VHE fix, and two one-liners for PML and MTRR" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: VHE: Context switch MDSCR_EL1 KVM: VMX: handle PML full VMEXIT that occurs during event delivery Revert "KVM: SVM: fix trashing of MSR_TSC_AUX" KVM: SVM: do not set MSR_TSC_AUX on 32-bit builds KVM: don't use anon_inode_getfd() before possible failures Revert "KVM: release anon file in failure path of vm creation" KVM: release anon file in failure path of vm creation KVM: nVMX: Fix memory corruption when using VMCS shadowing kvm: vmx: ensure VMCS is current while enabling PML KVM: SVM: fix trashing of MSR_TSC_AUX KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "This tree contains tooling fixes plus some additions: - fixes to the vdso2c build environment that Stephen Rothwell is using for the linux-next build (Arnaldo Carvalho de Melo) - AVX-512 instruction mappings (Adrian Hunter) - misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "perf tools: event.h needs asm/perf_regs.h" x86: Make the vdso2c compiler use the host architecture headers tools build: Fix objtool build with ARCH=x86_64 objtool: Always use host headers objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH tools build: Add HOSTARCH Makefile variable perf tests kmod-path: Fix build on ubuntu:16.04-x-armhf perf tools: Add AVX-512 instructions to the new instructions test perf tools: Add AVX-512 support to the instruction decoder used by Intel PT x86/insn: Add AVX-512 support to the instruction decoder x86/insn: perf tools: Fix vcvtph2ps instruction decoding
-
- 26 7月, 2016 20 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "The irq department delivers: - new core infrastructure to allow better management of multi-queue devices (interrupt spreading, node aware descriptor allocation ...) - a new interrupt flow handler to support the new fangled Intel VMD devices. - yet another new interrupt controller driver. - a series of fixes which addresses sparse warnings, missing includes, missing static declarations etc from Ben Dooks. - a fix for the error handling in the hierarchical domain allocation code. - the usual pile of small updates to core and driver code" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) genirq: Fix missing irq allocation affinity hint irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling irq/Documentation: Correct result of echnoing 5 to smp_affinity MAINTAINERS: Remove Jiang Liu from irq domains genirq/msi: Fix broken debug output genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors genirq/msi: Make use of affinity aware allocations genirq: Use affinity hint in irqdesc allocation genirq: Add affinity hint to irq allocation genirq: Introduce IRQD_AFFINITY_MANAGED flag genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP irqchip/s3c24xx: Fixup IO accessors for big endian irqchip/exynos-combiner: Fix usage of __raw IO irqdomain: Fix disposal of mappings for interrupt hierarchies irqchip/aspeed-vic: Add irq controller for Aspeed doc/devicetree: Add Aspeed VIC bindings x86/PCI/VMD: Use untracked irq handler genirq: Add untracked irq handler irqchip/mips-gic: Populate irq_domain names irqchip/gicv3-its: Implement two-level(indirect) device table support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Thomas Gleixner: "This update provides the following changes: - The rework of the timer wheel which addresses the shortcomings of the current wheel (cascading, slow search for next expiring timer, etc). That's the first major change of the wheel in almost 20 years since Finn implemted it. - A large overhaul of the clocksource drivers init functions to consolidate the Device Tree initialization - Some more Y2038 updates - A capability fix for timerfd - Yet another clock chip driver - The usual pile of updates, comment improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits) tick/nohz: Optimize nohz idle enter clockevents: Make clockevents_subsys static clocksource/drivers/time-armada-370-xp: Fix return value check timers: Implement optimization for same expiry time in mod_timer() timers: Split out index calculation timers: Only wake softirq if necessary timers: Forward the wheel clock whenever possible timers/nohz: Remove pointless tick_nohz_kick_tick() function timers: Optimize collect_expired_timers() for NOHZ timers: Move __run_timers() function timers: Remove set_timer_slack() leftovers timers: Switch to a non-cascading wheel timers: Reduce the CPU index space to 256k timers: Give a few structs and members proper names hlist: Add hlist_is_singular_node() helper signals: Use hrtimer for sigtimedwait() timers: Remove the deprecated mod_timer_pinned() API timers, net/ipv4/inet: Initialize connection request timers as pinned timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned timers, drivers/tty/metag_da: Initialize the poll timer as pinned ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Ingo Molnar: "Leftover fix from the v4.7 cycle: adds a reboot quirk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Add Dell Optiplex 7450 AIO reboot quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 timer updates from Ingo Molnar: "The main change in this tree is the reworking, fixing and extension of the TSC frequency enumeration code (by Len Brown)" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Remove the unused check_tsc_disabled() x86/tsc: Enumerate BXT tsc_khz via CPUID x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID x86/tsc_msr: Remove irqoff around MSR-based TSC enumeration x86/tsc_msr: Add Airmont reference clock values x86/tsc_msr: Correct Silvermont reference clock values x86/tsc_msr: Update comments, expand definitions x86/tsc_msr: Remove debugging messages x86/tsc_msr: Identify Intel-specific code Revert "x86/tsc: Add missing Cherrytrail frequency to the table"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - Intel-SoC enhancements (Andy Shevchenko) - Intel CPU symbolic model definition rework (Dave Hansen) - ... other misc changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/sfi: Enable enumeration of SD devices x86/pci: Use MRFLD abbreviation for Merrifield x86/platform/intel-mid: Make vertical indentation consistent x86/platform/intel-mid: Mark regulators explicitly defined x86/platform/intel-mid: Rename mrfl.c to mrfld.c x86/platform/intel-mid: Enable spidev on Intel Edison boards x86/platform/intel-mid: Extend PWRMU to support Penwell x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code x86/platform/intel-mid: Add pinctrl for Intel Merrifield x86/platform/intel-mid: Enable GPIO expanders on Edison x86/platform/intel-mid: Add Power Management Unit driver x86/platform/atom/punit: Enable support for Merrifield x86/platform/intel_mid_pci: Rework IRQ0 workaround x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal x86, mmc: Use Intel family name macros for mmc driver x86/intel_telemetry: Use Intel family name macros for telemetry driver x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver x86/platform: Use new Intel model number macros x86/intel_idle: Use Intel family macros for intel_idle ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fpu updates from Ingo Molnar: "The main x86 FPU changes in this cycle were: - a large series of cleanups, fixes and enhancements to re-enable the XSAVES instruction on Intel CPUs - which is the most advanced instruction to do FPU context switches (Yu-cheng Yu, Fenghua Yu) - Add FPU tracepoints for the FPU state machine (Dave Hansen)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Do not BUG_ON() in early FPU code x86/fpu/xstate: Re-enable XSAVES x86/fpu/xstate: Fix fpstate_init() for XRSTORS x86/fpu/xstate: Return NULL for disabled xstate component address x86/fpu/xstate: Fix __fpu_restore_sig() for XSAVES x86/fpu/xstate: Fix xstate_offsets, xstate_sizes for non-extended xstates x86/fpu/xstate: Fix XSTATE component offset print out x86/fpu/xstate: Fix PTRACE frames for XSAVES x86/fpu/xstate: Fix supervisor xstate component offset x86/fpu/xstate: Align xstate components according to CPUID x86/fpu/xstate: Copy xstate registers directly to the signal frame when compacted format is in use x86/fpu/xstate: Keep init_fpstate.xsave.header.xfeatures as zero for init optimization x86/fpu/xstate: Rename 'xstate_size' to 'fpu_kernel_xstate_size', to distinguish it from 'fpu_user_xstate_size' x86/fpu/xstate: Define and use 'fpu_user_xstate_size' x86/fpu: Add tracepoints to dump FPU state at key points
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 stackdump update from Ingo Molnar: "A number of stackdump enhancements" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Add show_stack_regs() and use it printk: Make the printk*once() variants return a value x86/dumpstack: Honor supplied @regs arg
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "Three small cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lguest: Read offset of device_cap later lguest: Read length of device_cap later x86: Do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 build updates from Ingo Molnar: "A build system fix and a cleanup" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kbuild: Remove stale asm-generic wrappers kbuild, x86: Track generated headers with generated-y
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 boot updates from Ingo Molnar: "The main changes: - add initial commits to randomize kernel memory section virtual addresses, enabled via a new kernel option: RANDOMIZE_MEMORY (Thomas Garnier, Kees Cook, Baoquan He, Yinghai Lu) - enhance KASLR (RANDOMIZE_BASE) physical memory randomization (Kees Cook) - EBDA/BIOS region boot quirk cleanups (Andy Lutomirski, Ingo Molnar) - misc cleanups/fixes" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Simplify EBDA-vs-BIOS reservation logic x86/boot: Clarify what x86_legacy_features.reserve_bios_regions does x86/boot: Reorganize and clean up the BIOS area reservation code x86/mm: Do not reference phys addr beyond kernel x86/mm: Add memory hotplug support for KASLR memory randomization x86/mm: Enable KASLR for vmalloc memory regions x86/mm: Enable KASLR for physical mapping memory regions x86/mm: Implement ASLR for kernel memory regions x86/mm: Separate variable for trampoline PGD x86/mm: Add PUD VA support for physical mapping x86/mm: Update physical mapping variable names x86/mm: Refactor KASLR entropy functions x86/KASLR: Fix boot crash with certain memory configurations x86/boot/64: Add forgotten end of function marker x86/KASLR: Allow randomization below the load address x86/KASLR: Extend kernel image physical address randomization to addresses larger than 4G x86/KASLR: Randomize virtual address separately x86/KASLR: Clarify identity map interface x86/boot: Refuse to build with data relocations x86/KASLR, x86/power: Remove x86 hibernation restrictions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 mm updates from Ingo Molnar: "Various x86 low level modifications: - preparatory work to support virtually mapped kernel stacks (Andy Lutomirski) - support for 64-bit __get_user() on 32-bit kernels (Benjamin LaHaise) - (involved) workaround for Knights Landing CPU erratum (Dave Hansen) - MPX enhancements (Dave Hansen) - mremap() extension to allow remapping of the special VDSO vma, for purposes of user level context save/restore (Dmitry Safonov) - hweight and entry code cleanups (Borislav Petkov) - bitops code generation optimizations and cleanups with modern GCC (H. Peter Anvin) - syscall entry code optimizations (Paolo Bonzini)" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits) x86/mm/cpa: Add missing comment in populate_pdg() x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs x86/syscalls: Add compat_sys_preadv64v2/compat_sys_pwritev64v2 x86/smp: Remove unnecessary initialization of thread_info::cpu x86/smp: Remove stack_smp_processor_id() x86/uaccess: Move thread_info::addr_limit to thread_struct x86/dumpstack: Rename thread_struct::sig_on_uaccess_error to sig_on_uaccess_err x86/uaccess: Move thread_info::uaccess_err and thread_info::sig_on_uaccess_err to thread_struct x86/dumpstack: When OOPSing, rewind the stack before do_exit() x86/mm/64: In vmalloc_fault(), use CR3 instead of current->active_mm x86/dumpstack/64: Handle faults when printing the "Stack: " part of an OOPS x86/dumpstack: Try harder to get a call trace on stack overflow x86/mm: Remove kernel_unmap_pages_in_pgd() and efi_cleanup_page_tables() x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated x86/mm/hotplug: Don't remove PGD entries in remove_pagetable() x86/mm: Use pte_none() to test for empty PTE x86/mm: Disallow running with 32-bit PTEs to work around erratum x86/mm: Ignore A/D bits in pte/pmd/pud_none() x86/mm: Move swap offset/type up in PTE to work around erratum x86/entry: Inline enter_from_user_mode() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/apic updates from Ingo Molnar: "Misc cleanups and a small fix" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Remove the unused struct apic::apic_id_mask field x86/apic: Fix misspelled APIC x86/ioapic: Simplify ioapic_setup_resources()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull NOHZ updates from Ingo Molnar: - fix system/idle cputime leaked on cputime accounting (all nohz configs) (Rik van Riel) - remove the messy, ad-hoc irqtime account on nohz-full and make it compatible with CONFIG_IRQ_TIME_ACCOUNTING=y instead (Rik van Riel) - cleanups (Frederic Weisbecker) - remove unecessary irq disablement in the irqtime code (Rik van Riel) * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Drop local_irq_save/restore from irqtime_account_irq() sched/cputime: Reorganize vtime native irqtime accounting headers sched/cputime: Clean up the old vtime gen irqtime accounting completely sched/cputime: Replace VTIME_GEN irq time code with IRQ_TIME_ACCOUNTING code sched/cputime: Count actually elapsed irq & softirq time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: - introduce and use task_rcu_dereference()/try_get_task_struct() to fix and generalize task_struct handling (Oleg Nesterov) - do various per entity load tracking (PELT) fixes and optimizations (Peter Zijlstra) - cputime virt-steal time accounting enhancements/fixes (Wanpeng Li) - introduce consolidated cputime output file cpuacct.usage_all and related refactorings (Zhao Lei) - ... plus misc fixes and enhancements * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Panic on scheduling while atomic bugs if kernel.panic_on_warn is set sched/cpuacct: Introduce cpuacct.usage_all to show all CPU stats together sched/cpuacct: Use loop to consolidate code in cpuacct_stats_show() sched/cpuacct: Merge cpuacct_usage_index and cpuacct_stat_index enums sched/fair: Rework throttle_count sync sched/core: Fix sched_getaffinity() return value kerneldoc comment sched/fair: Reorder cgroup creation code sched/fair: Apply more PELT fixes sched/fair: Fix PELT integrity for new tasks sched/cgroup: Fix cpu_cgroup_fork() handling sched/fair: Fix PELT integrity for new groups sched/fair: Fix and optimize the fork() path sched/cputime: Add steal time support to full dynticks CPU time accounting sched/cputime: Fix prev steal time accouting during CPU hotplug KVM: Fix steal clock warp during guest CPU hotplug sched/debug: Always show 'nr_migrations' sched/fair: Use task_rcu_dereference() sched/api: Introduce task_rcu_dereference() and try_get_task_struct() sched/idle: Optimize the generic idle loop sched/fair: Fix the wrong throttled clock time for cfs_rq_clock_task()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "With over 300 commits it's been a busy cycle - with most of the work concentrated on the tooling side (as it should). The main kernel side enhancements were: - Add per event callchain limit: Recently we introduced a sysctl to tune the max-stack for all events for which callchains were requested: $ sysctl kernel.perf_event_max_stack kernel.perf_event_max_stack = 127 Now this patch introduces a way to configure this per event, i.e. this becomes possible: $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a allowing finer tuning of how much buffer space callchains use. This uses an u16 from the reserved space at the end, leaving another u16 for future use. There has been interest in even finer tuning, namely to control the max stack for kernel and userspace callchains separately. Further discussion is needed, we may for instance use the remaining u16 for that and when it is present, assume that the sample_max_stack introduced in this patch applies for the kernel, and the u16 left is used for limiting the userspace callchain (Arnaldo Carvalho de Melo) - Optimize AUX event (hardware assisted side-band event) delivery (Kan Liang) - Rework Intel family name macro usage (this is partially x86 arch work) (Dave Hansen) - Refine and fix Intel LBR support (David Carrillo-Cisneros) - Add support for Intel 'TopDown' events (Andi Kleen) - Intel uncore PMU driver fixes and enhancements (Kan Liang) - ... other misc changes. Here's an incomplete list of the tooling enhancements (but there's much more, see the shortlog and the git log for details): - Support cross unwinding, i.e. collecting '--call-graph dwarf' perf.data files in one machine and then doing analysis in another machine of a different hardware architecture. This enables, for instance, to do: $ perf record -a --call-graph dwarf on a x86-32 or aarch64 system and then do 'perf report' on it on a x86_64 workstation (He Kuang) - Allow reading from a backward ring buffer (one setup via sys_perf_event_open() with perf_event_attr.write_backward = 1) (Wang Nan) - Finish merging initial SDT (Statically Defined Traces) support, see cset comments for details about how it all works (Masami Hiramatsu) - Support attaching eBPF programs to tracepoints (Wang Nan) - Add demangling of symbols in programs written in the Rust language (David Tolnay) - Add support for tracepoints in the python binding, including an example, that sets up and parses sched:sched_switch events, tools/perf/python/tracepoint.py (Jiri Olsa) - Introduce --stdio-color to set up the color output mode selection in 'annotate' and 'report', allowing emit color escape sequences when redirecting the output of these tools (Arnaldo Carvalho de Melo) - Add 'callindent' option to 'perf script -F', to indent the Intel PT call stack, making this output more ftrace-like (Adrian Hunter, Andi Kleen) - Allow dumping the object files generated by llvm when processing eBPF scriptlet events (Wang Nan) - Add stackcollapse.py script to help generating flame graphs (Paolo Bonzini) - Add --ldlat option to 'perf mem' to specify load latency for loads event (e.g. cpu/mem-loads/ ) (Jiri Olsa) - Tooling support for Intel TopDown counters, recently added to the kernel (Andi Kleen)" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits) perf tests: Add is_printable_array test perf tools: Make is_printable_array global perf script python: Fix string vs byte array resolving perf probe: Warn unmatched function filter correctly perf cpu_map: Add more helpers perf stat: Balance opening and reading events tools: Copy linux/{hash,poison}.h and check for drift perf tools: Remove include/linux/list.h from perf's MANIFEST tools: Copy the bitops files accessed from the kernel and check for drift Remove: kernel unistd*h files from perf's MANIFEST, not used perf tools: Remove tools/perf/util/include/linux/const.h perf tools: Remove tools/perf/util/include/asm/byteorder.h perf tools: Add missing linux/compiler.h include to perf-sys.h perf jit: Remove some no-op error handling perf jit: Add missing curly braces objtool: Initialize variable to silence old compiler objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi perf record: Add --tail-synthesize option perf session: Don't warn about out of order event if write_backward is used perf tools: Enable overwrite settings ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS updates from Ingo Molnar: "The biggest change in this cycle was an enhancement by Yazen Ghannam to reduce the number of MCE error injection related IPIs. The rest are smaller fixes" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix mce_rdmsrl() warning message x86/RAS/AMD: Reduce the number of IPIs when prepping error injection x86/mce/AMD: Increase size of the bank_map type x86/mce: Do not use bank 1 for APEI generated error logs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking updates from Ingo Molnar: "The locking tree was busier in this cycle than the usual pattern - a couple of major projects happened to coincide. The main changes are: - implement the atomic_fetch_{add,sub,and,or,xor}() API natively across all SMP architectures (Peter Zijlstra) - add atomic_fetch_{inc/dec}() as well, using the generic primitives (Davidlohr Bueso) - optimize various aspects of rwsems (Jason Low, Davidlohr Bueso, Waiman Long) - optimize smp_cond_load_acquire() on arm64 and implement LSE based atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}() on arm64 (Will Deacon) - introduce smp_acquire__after_ctrl_dep() and fix various barrier mis-uses and bugs (Peter Zijlstra) - after discovering ancient spin_unlock_wait() barrier bugs in its implementation and usage, strengthen its semantics and update/fix usage sites (Peter Zijlstra) - optimize mutex_trylock() fastpath (Peter Zijlstra) - ... misc fixes and cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire() locking/static_keys: Fix non static symbol Sparse warning locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec() locking/atomic, arch/tile: Fix tilepro build locking/atomic, arch/m68k: Remove comment locking/atomic, arch/arc: Fix build locking/Documentation: Clarify limited control-dependency scope locking/atomic, arch/rwsem: Employ atomic_long_fetch_add() locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire() locking/atomic, arch/mips: Convert to _relaxed atomics locking/atomic, arch/alpha: Convert to _relaxed atomics locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions locking/atomic: Remove linux/atomic.h:atomic_fetch_or() locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}() locking/atomic: Fix atomic64_relaxed() bits locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}() locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}() locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}() locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI updates from Ingo Molnar: "The biggest change in this cycle were SGI/UV related changes that clean up and fix UV boot quirks and problems. There's also various smaller cleanups and refinements" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Reorganize the GUID table to make it easier to read x86/efi: Remove the unused efi_get_time() function x86/efi: Update efi_thunk() to use the the arch_efi_call_virt*() macros x86/uv: Update uv_bios_call() to use efi_call_virt_pointer() efi: Convert efi_call_virt() to efi_call_virt_pointer() x86/efi: Remove unused variable 'efi' efi: Document #define FOO_PROTOCOL_GUID layout efibc: Report more information in the error messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - documentation updates - miscellaneous fixes - minor reorganization of code - torture-test updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) rcu: Correctly handle sparse possible cpus rcu: sysctl: Panic on RCU Stall rcu: Fix a typo in a comment rcu: Make call_rcu_tasks() tolerate first call with irqs disabled rcu: Disable TASKS_RCU for usermode Linux rcu: No ordering for rcu_assign_pointer() of NULL rcutorture: Fix error return code in rcu_perf_init() torture: Inflict default jitter rcuperf: Don't treat gp_exp mis-setting as a WARN rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments rcutorture: Don't specify the cpu type of QEMU on PPC rcutorture: Make -soundhw a x86 specific option rcutorture: Use vmlinux as the fallback kernel image rcutorture/doc: Create initrd using dracut torture: Stop onoff task if there is only one cpu torture: Add starvation events to error summary torture: Break online and offline functions out of torture_onoff() torture: Forgive lengthy trace dumps and preemption torture: Remove CONFIG_RCU_TORTURE_TEST_RUNNABLE, simplify code torture: Simplify code, eliminate RCU_PERF_TEST_RUNNABLE ...
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo-20160725' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Add AVX-512 support to the instruction decoder, used by Intel PT, fix vcvtph2ps instruction decoding (Adrian Hunter) - Make objtool and vdso2c use the right arch header search path (Stephen Rothwell, Josh Poimboeuf, Arnaldo Carvalho de Melo) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 25 7月, 2016 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This reverts commit e083a21f. Not needed at all, tools/perf/util/perf_regs.h, included via: #include "perf_regs.h" Should have a definition for PERF_REGS_MAX, and since this is dependent on HAVE_PERF_REGS_SUPPORT, fixes the build on powerpc, noticed by trying to cross compile this from ubuntu16.04 with a locally build libz & elfutils pair, since those are not available in multilib packages. Cc: Jiri Olsa <jolsa@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-0bv204s71t4wuw1l53b6fz79@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephen Rothwell 提交于
To be clear: this is a ppc64le hosted, x86_64 target cross build. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160723150845.3af8e452@canb.auug.org.auSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Rafael J. Wysocki 提交于
* pm-cpu: x86: remove duplicate turbo ratio limit MSRs tools/power turbostat: Replace MSR_NHM_TURBO_RATIO_LIMIT cpufreq: intel_pstate: Replace MSR_NHM_TURBO_RATIO_LIMIT
-
由 Rafael J. Wysocki 提交于
* powercap: powercap / RAPL: Add support for Ivy Bridge server powercap / RAPL: add support for Denverton powercap / RAPL: handle missing MSRs powercap / RAPL: reduce message loglevel
-