- 11 6月, 2008 1 次提交
-
-
由 Ayaz Abdulla 提交于
Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 10 6月, 2008 15 次提交
-
-
由 Pavel Emelyanov 提交于
The bindv6only is tuned via sysctl. It is already on a struct net and per-net sysctls allow for its modification (ipv6_sysctl_net_init). Despite this the value configured in the init net is used for the rest of them. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ingo Molnar 提交于
-tip testing found the following build error: drivers/built-in.o: In function `mcs_receive_irq': mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le' drivers/built-in.o: In function `mcs_hard_xmit': mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le' with: http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad the reason is a missing enablement of the CRC32 library in the Kconfig. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch increments the version to 3.92.1. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
On 5761 non-e devices, two problems prevent the administrator from overriding the WOL settings in the device's NVRAM. The first problem is that GPIO 0 and GPIO 2 have been swapped. This change prevented the administrator from turning on WOL when it is disabled in NVRAM. The fix is to add a new path for the 5761 that swaps the two GPIOs in the code as well. The second problem is that GPIO 1 could not be toggled by the driver because the GPIO is shared with the debug UART GPIO. This will prevent the administrator from being able to turn WOL off if it was enabled in NVRAM. The fix is to always disable the debug UART after a GRC reset. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was testing against the wrong flags variable. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The git commit ef167e27 entitled "Fix supporting flowctrl code" introduced a bug that prevents 5714S, 5715S and 5780S devices from falling back to a forced link mode. The problem is that the added flow control check will always fail if flow control is set to autoneg and either RX or TX (or both) flow control is enabled. The driver defaults to setting flow control to autoneg and advertises both RX and TX flow control. The fix is to remove the errant check. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcin Slusarz 提交于
fix race between: ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set (which assumes that "led->priv" is not NULL) and iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led which sets priv field in struct iwl3945_led after led->led_dev.brightness_set = iwl3945_led_brightness_set; (...) led_classdev_register(device, &led->led_dev); http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oopsSigned-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: linux-wireless@vger.kernel.org Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adrian Bunk 提交于
This patch fixes a typo in the name of a config variable. Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Reviewed-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Assaf Krauss 提交于
This patch adds a check to the set_channel flow. When attempting to change the channel while in IBSS mode, and the new channel does not support IBSS mode, the flow return with an error value with no consequences on the mac80211 and driver state. Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Sufficient scans (at least 2 or 3) should have been done within 7 seconds to find an existing IBSS to join. This should improve IBSS creation latency; and since IBSS merging is still in effect, shouldn't have detrimental effects on eventual IBSS convergence. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch fixes a data alignment issue in the zd1211rw driver. The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test to test for the presence of the 2 byte QoS control field. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Assaf Krauss 提交于
This patch fixes the issue of slow reconnection to an IBSS cell after disconnection from it. Now the interface's bssid is reset upon ifdown. ieee80211_sta_find_ibss: if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len))) Note: In general disconnection is still not handled properly in mac80211 Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This fixes an issus that made "iwconfig eth1 power on" non-working. When we get a "PS sleep" event, we have to confirm this to the firmware. The confirm happens with a command, but this command is special: the firmware won't send us a response. if_cs_host_to_card() is setting priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and was never cleared back. Now I put the special knowledge that the CMD_802_11_PS_MODE with CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly clearing the dnld_sent state in lbs_send_confirmsleep(). Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Otherwise userspace has no idea the IBSS creation succeeded. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
When another scan is in progress, a direct scan gets dropped on the floor. However, that direct scan is usually the scan that's really needed by userspace, and gets stomped on by all the broadcast scans the ipw2200 driver issues internally. Make sure the direct scan happens eventually, and as a bonus ensure that the passive scan worker is cleaned up when appropriate. The change of request_passive_scan form a struct work to struct delayed_work is only to make the set_wx_scan() code a bit simpler, it's still only used with a delay of 0 to match previous behavior. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 6月, 2008 24 次提交
-
-
由 James Chapman 提交于
Some problems have been experienced in the field which cause an oops in the pppol2tp driver if L2TP tunnels fail while passing data. The pppol2tp driver uses private data that is referenced via the sk->sk_user_data of its UDP and PPPoL2TP sockets. This patch makes sure that the driver uses sock_hold() when it holds a reference to the sk pointer. This affects its sendmsg(), recvmsg(), getname(), [gs]etsockopt() and ioctl() handlers. Tested by ISP where problem was seen. System has been up 10 days with no oops since running this patch. Without the patch, an oops would occur every 1-2 days. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Octavian Purdila 提交于
skb_splice_bits temporary drops the socket lock while iterating over the socket queue in order to break a reverse locking condition which happens with sendfile. This, however, opens a window of opportunity for tcp_collapse() to aggregate skbs and thus potentially free the current skb used in skb_splice_bits and tcp_read_sock. This patch fixes the problem by (re-)getting the same "logical skb" after the lock has been temporary dropped. Based on idea and initial patch from Evgeniy Polyakov. Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
TCP "resets sent" counter is not incremented when a TCP Reset is sent via tcp_send_active_reset(). Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The program below just leaks the raw kernel socket int main() { int fd = socket(PF_INET, SOCK_RAW, IPPROTO_UDP); struct sockaddr_in addr; memset(&addr, 0, sizeof(addr)); inet_aton("127.0.0.1", &addr.sin_addr); addr.sin_family = AF_INET; addr.sin_port = htons(2048); sendto(fd, "a", 1, MSG_MORE, &addr, sizeof(addr)); return 0; } Corked packet is allocated via sock_wmalloc which holds the owner socket, so one should uncork it and flush all pending data on close. Do this in the same way as in UDP. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Chapman 提交于
If an L2TP daemon closes a tunnel socket while packets are queued in the tunnel's reorder queue, a kernel warning is logged because the socket is closed while skbs are still referencing it. The fix is to purge the queue in the socket's release handler. WARNING: at include/net/sock.h:351 udp_lib_unhash+0x41/0x68() Pid: 12998, comm: openl2tpd Not tainted 2.6.25 #8 [<c0423c58>] warn_on_slowpath+0x41/0x51 [<c05d33a7>] udp_lib_unhash+0x41/0x68 [<c059424d>] sk_common_release+0x23/0x90 [<c05d16be>] udp_lib_close+0x8/0xa [<c05d8684>] inet_release+0x42/0x48 [<c0592599>] sock_release+0x14/0x60 [<c059299f>] sock_close+0x29/0x30 [<c046ef52>] __fput+0xad/0x15b [<c046f1d9>] fput+0x17/0x19 [<c046c8c4>] filp_close+0x50/0x5a [<c046da06>] sys_close+0x69/0x9f [<c04048ce>] syscall_call+0x7/0xb Signed-off-by: NJames Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Felix Homann 提交于
Enable the Philips CPWUA054/00 in p54usb. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes a context assertion in ssb that makes b44 print out warnings on resume. This fixes the following kernel oops: http://www.kerneloops.org/oops.php?number=12732 http://www.kerneloops.org/oops.php?number=11410Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
The size was two small by two bytes. Signed-off-by: Holger Schurig Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
If there are no networks on the free list, expire the oldest one when creating a new adhoc network. Because ipw2200 and the ieee80211 stack don't actually cull old networks and place them back on the free list unless they are needed for new probe responses, over time the free list would become empty and creating an adhoc network would fail due to the ! list_empty(...) check. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrew Morton 提交于
WARNING: space prohibited between function name and open parenthesis '(' #22: FILE: drivers/net/wireless/airo.c:2907: + while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { total: 0 errors, 1 warnings, 8 lines checked ./patches/wireless-airo-waitbusy-wont-delay.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Dan Williams <dcbw@redhat.com> Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vlad Yasevich 提交于
Commit e9df2e8f ("[IPV6]: Use appropriate sock tclass setting for routing lookup.") also changed the way that ECN capable transports mark this capability in IPv6. As a result, SCTP was not marking ECN capablity because the traffic class was never set. This patch brings back the markings for IPv6 traffic. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
When fast retransmit is triggered by a sack, we should flush the queue only once so that only 1 retransmit happens. Also, since we could potentially have non-fast-rtx chunks on the retransmit queue, we need make sure any chunks eligable for fast retransmit are sent first during fast retransmission. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
When we are trying to fast retransmit the lowest outstanding TSN, we need to restart the T3-RTX timer, so that subsequent timeouts will correctly tag all the packets necessary for retransmissions. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Correctly keep track of Fast Recovery state and do not reduce congestion window multiple times during sucht state. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gui Jianfeng 提交于
There's no need to execute sctp_v4_dst_saddr() for each iteration, just move it out of loop. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gui Jianfeng 提交于
If the current retran_path is the only active one, it should update it to the the next inactive one. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This bug is able to corrupt fackets_out in very rare cases. In order for this to cause corruption: 1) DSACK in the middle of previous SACK block must be generated. 2) In order to take that particular branch, part or all of the DSACKed segment must already be SACKed so that we have that in cache in the first place. 3) The new info must be top enough so that fackets_out will be updated on this iteration. ...then fack_count is updated while skb wasn't, then we walk again that particular segment thus updating fack_count twice for a single skb and finally that value is assigned to fackets_out by tcp_sacktag_one. It is safe to call tcp_sacktag_one just once for a segment (at DSACK), no need to call again for plain SACK. Potential problem of the miscount are limited to premature entry to recovery and to inflated reordering metric (which could even cancel each other out in the most the luckiest scenarios :-)). Both are quite insignificant in worst case too and there exists also code to reset them (fackets_out once sacked_out becomes zero and reordering metric on RTO). This has been reported by a number of people, because it occurred quite rarely, it has been very evasive. Andy Furniss was able to get it to occur couple of times so that a bit more info was collected about the problem using a debug patch, though it still required lot of checking around. Thanks also to others who have tried to help here. This is listed as Bugzilla #10346. The bug was introduced by me in commit 68f8353b ([TCP]: Rewrite SACK block processing & sack_recv_cache use), I probably thought back then that there's need to scan that entry twice or didn't dare to make it go through it just once there. Going through twice would have required restoring fack_count after the walk but as noted above, I chose to drop the additional walk step altogether here. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Asselstine 提交于
Make use of local_irq_save and local_irq_restore rather then the deprecated save_and_cli and restore_flags calls. Signed-off-by: NMark Asselstine <mark.asselstine@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian-Ken Rueegsegger 提交于
This patch fixes the usage of RIPEMD-160 in xfrm_algo which in turn allows hmac(rmd160) to be used as authentication mechanism in IPsec ESP and AH (see RFC 2857). Signed-off-by: NAdrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Denis V. Lunev 提交于
IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data actually. In this case ip_flush_pending_frames should be called instead of ip6_flush_pending_frames. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-