Commits 2cdc6899 ("crypto: ghash - Add GHASH digest algorithm for
GCM") and 0e1227d3 ("crypto: ghash - Add PCLMULQDQ accelerated
implementation") added "select CRYPTO_SHASH" to two entries. That
Kconfig symbol doesn't exist. These two selects are nops. Drop them.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Also, a comma was inserted to offset a modifier.
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

CRYPTO_GHASH_CLMUL_NI_INTEL and CRYPTO_AES_NI_INTEL cannot be used
on UML.
Commit 3e02e5cb and 54b6a1bd enabled them by accident.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Loading fpu without aesni-intel does nothing.  Loading aesni-intel
without fpu causes modes like xts to fail.  (Unloading
aesni-intel will restore those modes.)

One solution would be to make aesni-intel depend on fpu, but it
seems cleaner to just combine the modules.

This is probably responsible for bugs like:
https://bugzilla.redhat.com/show_bug.cgi?id=589390Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This feature no longer needs the experimental tag.
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add missing dependency on NET since we require sockets for our
interface.

Should really be a select but kconfig doesn't like that:

net/Kconfig:6:error: found recursive dependency: NET -> NETWORK_FILESYSTEMS -> AFS_FS -> AF_RXRPC -> CRYPTO -> CRYPTO_USER_API_HASH -> CRYPTO_USER_API -> NET
Reported-by: NZimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AES-NI instructions are also available in legacy mode so the 32-bit
architecture may profit from those, too.

To illustrate the performance gain here's a short summary of a dm-crypt
speed test on a Core i7 M620 running at 2.67GHz comparing both assembler
implementations:

x86:                   i568       aes-ni    delta
ECB, 256 bit:     93.8 MB/s   123.3 MB/s   +31.4%
CBC, 256 bit:     84.8 MB/s   262.3 MB/s  +209.3%
LRW, 256 bit:    108.6 MB/s   222.1 MB/s  +104.5%
XTS, 256 bit:    105.0 MB/s   205.5 MB/s   +95.7%

Additionally, due to some minor optimizations, the 64-bit version also
got a minor performance gain as seen below:

x86-64:           old impl.    new impl.    delta
ECB, 256 bit:    121.1 MB/s   123.0 MB/s    +1.5%
CBC, 256 bit:    285.3 MB/s   290.8 MB/s    +1.9%
LRW, 256 bit:    263.7 MB/s   265.3 MB/s    +0.6%
XTS, 256 bit:    251.1 MB/s   255.3 MB/s    +1.7%
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Reviewed-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the af_alg plugin for symmetric key ciphers,
corresponding to the ablkcipher kernel operation type.

Keys can optionally be set through the setsockopt interface.

Once a sendmsg call occurs without MSG_MORE no further writes
may be made to the socket until all previous data has been read.

IVs and and whether encryption/decryption is performed can be
set through the setsockopt interface or as a control message
to sendmsg.

The interface is completely synchronous, all operations are
carried out in recvmsg(2) and will complete prior to the system
call returning.

The splice(2) interface support reading the user-space data directly
without copying (except that the Crypto API itself may copy the data
if alignment is off).

The recvmsg(2) interface supports directly writing to user-space
without additional copying, i.e., the kernel crypto interface will
receive the user-space address as its output SG list.

Thakns to Miloslav Trmac for reviewing this and contributing
fixes and improvements.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the af_alg plugin for hash, corresponding to
the ahash kernel operation type.

Keys can optionally be set through the setsockopt interface.

Each sendmsg call will finalise the hash unless sent with a MSG_MORE
flag.

Partial hash states can be cloned using accept(2).

The interface is completely synchronous, all operations will
complete prior to the system call returning.

Both sendmsg(2) and splice(2) support reading the user-space
data directly without copying (except that the Crypto API itself
may copy the data if alignment is off).

For now only the splice(2) interface supports performing digest
instead of init/update/final.  In future the sendmsg(2) interface
will also be modified to use digest/finup where possible so that
hardware that cannot return a partial hash state can still benefit
from this interface.

Thakns to Miloslav Trmac for reviewing this and contributing
fixes and improvements.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NMartin Willi <martin@strongswan.org>

This patch creates the backbone of the user-space interface for
the Crypto API, through a new socket family AF_ALG.

Each session corresponds to one or more connections obtained from
that socket.  The number depends on the number of inputs/outputs
of that particular type of operation.  For most types there will
be a s ingle connection/file descriptor that is used for both input
and output.  AEAD is one of the few that require two inputs.

Each algorithm type will provide its own implementation that plugs
into af_alg.  They're keyed using a string such as "skcipher" or
"hash".

IOW this patch only contains the boring bits that is required
to hold everything together.

Thakns to Miloslav Trmac for reviewing this and contributing
fixes and improvements.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NMartin Willi <martin@strongswan.org>

Below is a patch to update the broken web addresses, in crypto/*
that I could locate. Some are just simple typos that needed to be
fixed, and some had a change in location altogether..
let me know if any of them need to be changed and such. 
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NChuck Ebbert <cebbert@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

On Thu, Aug 05, 2010 at 07:01:21PM -0700, Linus Torvalds wrote:
> On Thu, Aug 5, 2010 at 6:40 PM, Herbert Xu <herbert@gondor.hengli.com.au> wrote:
> >
> > -config CRYPTO_MANAGER_TESTS
> > -       bool "Run algolithms' self-tests"
> > -       default y
> > -       depends on CRYPTO_MANAGER2
> > +config CRYPTO_MANAGER_DISABLE_TESTS
> > +       bool "Disable run-time self tests"
> > +       depends on CRYPTO_MANAGER2 && EMBEDDED
>
> Why do you still want to force-enable those tests? I was going to
> complain about the "default y" anyway, now I'm _really_ complaining,
> because you've now made it impossible to disable those tests. Why?

As requested, this patch sets the default to y and removes the
EMBEDDED dependency.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes a serious bug in the test disabling patch where
it can cause an spurious load of the cryptomgr module even when
it's compiled in.

It also negates the test disabling option so that its absence
causes tests to be enabled.

The Kconfig option is also now behind EMBEDDED.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

By default, CONFIG_CRYPTO_MANAGER_TESTS will be enabled and thus
self-tests will still run, but it is now possible to disable them
to gain some time during bootup.
Signed-off-by: NAlexander Shishkin <virtuoso@slind.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The PCOMP Kconfig entry current allows the following combination
which is illegal:

ZLIB=y
PCOMP=y
ALGAPI=m
ALGAPI2=y
MANAGER=m
MANAGER2=m

This patch fixes this by adding PCOMP2 so that PCOMP can select
ALGAPI to propagate the setting to MANAGER2.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NGilles Espinasse <g.esp@free.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds a parallel crypto template that takes a crypto
algorithm and converts it to process the crypto transforms in
parallel. For the moment only aead algorithms are supported.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

CLMUL-NI accelerated GHASH should be turned off on non-x86_64 machine.
Reported-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

PCLMULQDQ is used to accelerate the most time-consuming part of GHASH,
carry-less multiplication. More information about PCLMULQDQ can be
found at:

http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/

Because PCLMULQDQ changes XMM state, its usage must be enclosed with
kernel_fpu_begin/end, which can be used only in process context, the
acceleration is implemented as crypto_ahash. That is, request in soft
IRQ context will be defered to the cryptd kernel thread.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds VMAC (a fast MAC) support into crypto framework.
Signed-off-by: NShane Wang <shane.wang@intel.com>
Signed-off-by: NJoseph Cihula <joseph.cihula@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

What about something like this?  It defaults the CPRNG to m and makes FIPS
dependent on the CPRNG.  That way you get a module build by default, but you can
change it to y manually during config and still satisfy the dependency, and if
you select N it disables FIPS as well.  I rather like that better than making
FIPS a tristate.  I just tested it out here and it seems to work well.  Let me
know what you think
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This reverts commit 215ccd6f.

It causes CPRNG and everything selected by it to be built-in
whenever FIPS is enabled.  The problem is that it is selecting
a tristate from a bool, which is usually not what is intended.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the dedicated GHASH implementation in GCM, and uses the GHASH
digest algorithm instead. This will make GCM uses hardware accelerated
GHASH implementation automatically if available.

ahash instead of shash interface is used, because some hardware
accelerated GHASH implementation needs asynchronous interface.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

GHASH is implemented as a shash algorithm. The actual implementation
is copied from gcm.c. This makes it possible to add
architecture/hardware accelerated GHASH implementation.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ANSI CPRNG has no dependence on FIPS support.  FIPS support however,
requires the use of the CPRNG.  Adjust that depedency relationship in Kconfig.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The RNG should work with FIPS disabled.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Because kernel_fpu_begin() and kernel_fpu_end() operations are too
slow, the performance gain of general mode implementation + aes-aesni
is almost all compensated.

The AES-NI support for more modes are implemented as follow:

- Add a new AES algorithm implementation named __aes-aesni without
  kernel_fpu_begin/end()

- Use fpu(<mode>(AES)) to provide kenrel_fpu_begin/end() invoking

- Add <mode>(AES) ablkcipher, which uses cryptd(fpu(<mode>(AES))) to
  defer cryption to cryptd context in soft_irq context.

Now the ctr, lrw, pcbc and xts support are added.

Performance testing based on dm-crypt shows that cryption time can be
reduced to 50% of general mode implementation + aes-aesni implementation.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Blkcipher touching FPU need to be enclosed by kernel_fpu_begin() and
kernel_fpu_end(). If they are invoked in cipher algorithm
implementation, they will be invoked for each block, so that
performance will be hurt, because they are "slow" operations. This
patch implements "fpu" template, which makes these operations to be
invoked for each request.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The current "comp" crypto interface supports one-shot (de)compression only,
i.e. the whole data buffer to be (de)compressed must be passed at once, and
the whole (de)compressed data buffer will be received at once.
In several use-cases (e.g. compressed file systems that store files in big
compressed blocks), this workflow is not suitable.
Furthermore, the "comp" type doesn't provide for the configuration of
(de)compression parameters, and always allocates workspace memory for both
compression and decompression, which may waste memory.

To solve this, add a "pcomp" partial (de)compression interface that provides
the following operations:
  - crypto_compress_{init,update,final}() for compression,
  - crypto_decompress_{init,update,final}() for decompression,
  - crypto_{,de}compress_setup(), to configure (de)compression parameters
    (incl. allocating workspace memory).

The (de)compression methods take a struct comp_request, which was mimicked
after the z_stream object in zlib, and contains buffer pointer and length
pairs for input and output.

The setup methods take an opaque parameter pointer and length pair. Parameters
are supposed to be encoded using netlink attributes, whose meanings depend on
the actual (name of the) (de)compression algorithm.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

keventd_wq has potential starvation problem, so use dedicated
kcrypto_wq instead.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Original cryptd thread implementation has scalability issue, this
patch solve the issue with a per-CPU thread implementation.

struct cryptd_queue is defined to be a per-CPU queue, which holds one
struct cryptd_cpu_queue for each CPU. In struct cryptd_cpu_queue, a
struct crypto_queue holds all requests for the CPU, a struct
work_struct is used to run all requests for the CPU.

Testing based on dm-crypt on an Intel Core 2 E6400 (two cores) machine
shows 19.2% performance gain. The testing script is as follow:

-------------------- script begin ---------------------------
#!/bin/sh

dmc_create()
{
        # Create a crypt device using dmsetup
        dmsetup create $2 --table "0 `blockdev --getsize $1` crypt cbc(aes-asm)?cryptd?plain:plain babebabebabebabebabebabebabebabe 0 $1 0"
}

dmsetup remove crypt0
dmsetup remove crypt1

dd if=/dev/zero of=/dev/ram0 bs=1M count=4 >& /dev/null
dd if=/dev/zero of=/dev/ram1 bs=1M count=4 >& /dev/null

dmc_create /dev/ram0 crypt0
dmc_create /dev/ram1 crypt1

cat >tr.sh <<EOF
#!/bin/sh

for n in \$(seq 10); do
        dd if=/dev/dm-0 of=/dev/null >& /dev/null &
        dd if=/dev/dm-1 of=/dev/null >& /dev/null &
done
wait
EOF

for n in $(seq 10); do
        /usr/bin/time sh tr.sh
done
rm tr.sh
-------------------- script end   ---------------------------

The separator of dm-crypt parameter is changed from "-" to "?", because
"-" is used in some cipher driver name too, and cryptds need to specify
cipher driver name instead of cipher name.

The test result on an Intel Core2 E6400 (two cores) is as follow:

without patch:
-----------------wo begin --------------------------
0.04user 0.38system 0:00.39elapsed 107%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6566minor)pagefaults 0swaps
0.07user 0.35system 0:00.35elapsed 121%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6567minor)pagefaults 0swaps
0.06user 0.34system 0:00.30elapsed 135%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6562minor)pagefaults 0swaps
0.05user 0.37system 0:00.36elapsed 119%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6607minor)pagefaults 0swaps
0.06user 0.36system 0:00.35elapsed 120%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6562minor)pagefaults 0swaps
0.05user 0.37system 0:00.31elapsed 136%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6594minor)pagefaults 0swaps
0.04user 0.34system 0:00.30elapsed 126%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6597minor)pagefaults 0swaps
0.06user 0.32system 0:00.31elapsed 125%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6571minor)pagefaults 0swaps
0.06user 0.34system 0:00.31elapsed 134%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6581minor)pagefaults 0swaps
0.05user 0.38system 0:00.31elapsed 138%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6600minor)pagefaults 0swaps
-----------------wo end   --------------------------


with patch:
------------------w begin --------------------------
0.02user 0.31system 0:00.24elapsed 141%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6554minor)pagefaults 0swaps
0.05user 0.34system 0:00.31elapsed 127%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6606minor)pagefaults 0swaps
0.07user 0.33system 0:00.26elapsed 155%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6559minor)pagefaults 0swaps
0.07user 0.32system 0:00.26elapsed 151%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6562minor)pagefaults 0swaps
0.05user 0.34system 0:00.26elapsed 150%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6603minor)pagefaults 0swaps
0.03user 0.36system 0:00.31elapsed 124%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6562minor)pagefaults 0swaps
0.04user 0.35system 0:00.26elapsed 147%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6586minor)pagefaults 0swaps
0.03user 0.37system 0:00.27elapsed 146%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6562minor)pagefaults 0swaps
0.04user 0.36system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6594minor)pagefaults 0swaps
0.04user 0.35system 0:00.26elapsed 154%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+6557minor)pagefaults 0swaps
------------------w end   --------------------------

The middle value of elapsed time is:
wo cryptwq: 0.31
w  cryptwq: 0.26

The performance gain is about (0.31-0.26)/0.26 = 0.192.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use dedicated workqueue for crypto subsystem

A dedicated workqueue named kcrypto_wq is created to be used by crypto
subsystem. The system shared keventd_wq is not suitable for
encryption/decryption, because of potential starvation problem.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
instructions that are going to be introduced in the next generation of
Intel processor, as of 2009. These instructions enable fast and secure
data encryption and decryption, using the Advanced Encryption Standard
(AES), defined by FIPS Publication number 197.  The architecture
introduces six instructions that offer full hardware support for
AES. Four of them support high performance data encryption and
decryption, and the other two instructions support the AES key
expansion procedure.

The white paper can be downloaded from:

http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf

AES may be used in soft_irq context, but MMX/SSE context can not be
touched safely in soft_irq context. So in_interrupt() is checked, if
in IRQ or soft_irq context, the general x86_64 implementation are used
instead.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes sha512 and sha384 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes michael_mic to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch changes wp512, wp384 and wp256 to the new shash interface.
Signed-off-by: NAdrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>