Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The idea is simple: there's a bit, per APIC, in guest memory,
that tells the guest that it does not need EOI.
Guest tests it using a single est and clear operation - this is
necessary so that host can detect interrupt nesting - and if set, it can
skip the EOI MSR.

I run a simple microbenchmark to show exit reduction
(note: for testing, need to apply follow-up patch
'kvm: host side for eoi optimization' + a qemu patch
 I posted separately, on host):

Before:

Performance counter stats for 'sleep 1s':

            47,357 kvm:kvm_entry                                                [99.98%]
                 0 kvm:kvm_hypercall                                            [99.98%]
                 0 kvm:kvm_hv_hypercall                                         [99.98%]
             5,001 kvm:kvm_pio                                                  [99.98%]
                 0 kvm:kvm_cpuid                                                [99.98%]
            22,124 kvm:kvm_apic                                                 [99.98%]
            49,849 kvm:kvm_exit                                                 [99.98%]
            21,115 kvm:kvm_inj_virq                                             [99.98%]
                 0 kvm:kvm_inj_exception                                        [99.98%]
                 0 kvm:kvm_page_fault                                           [99.98%]
            22,937 kvm:kvm_msr                                                  [99.98%]
                 0 kvm:kvm_cr                                                   [99.98%]
                 0 kvm:kvm_pic_set_irq                                          [99.98%]
                 0 kvm:kvm_apic_ipi                                             [99.98%]
            22,207 kvm:kvm_apic_accept_irq                                      [99.98%]
            22,421 kvm:kvm_eoi                                                  [99.98%]
                 0 kvm:kvm_pv_eoi                                               [99.99%]
                 0 kvm:kvm_nested_vmrun                                         [99.99%]
                 0 kvm:kvm_nested_intercepts                                    [99.99%]
                 0 kvm:kvm_nested_vmexit                                        [99.99%]
                 0 kvm:kvm_nested_vmexit_inject                                    [99.99%]
                 0 kvm:kvm_nested_intr_vmexit                                    [99.99%]
                 0 kvm:kvm_invlpga                                              [99.99%]
                 0 kvm:kvm_skinit                                               [99.99%]
                57 kvm:kvm_emulate_insn                                         [99.99%]
                 0 kvm:vcpu_match_mmio                                          [99.99%]
                 0 kvm:kvm_userspace_exit                                       [99.99%]
                 2 kvm:kvm_set_irq                                              [99.99%]
                 2 kvm:kvm_ioapic_set_irq                                       [99.99%]
            23,609 kvm:kvm_msi_set_irq                                          [99.99%]
                 1 kvm:kvm_ack_irq                                              [99.99%]
               131 kvm:kvm_mmio                                                 [99.99%]
               226 kvm:kvm_fpu                                                  [100.00%]
                 0 kvm:kvm_age_page                                             [100.00%]
                 0 kvm:kvm_try_async_get_page                                    [100.00%]
                 0 kvm:kvm_async_pf_doublefault                                    [100.00%]
                 0 kvm:kvm_async_pf_not_present                                    [100.00%]
                 0 kvm:kvm_async_pf_ready                                       [100.00%]
                 0 kvm:kvm_async_pf_completed

       1.002100578 seconds time elapsed

After:

 Performance counter stats for 'sleep 1s':

            28,354 kvm:kvm_entry                                                [99.98%]
                 0 kvm:kvm_hypercall                                            [99.98%]
                 0 kvm:kvm_hv_hypercall                                         [99.98%]
             1,347 kvm:kvm_pio                                                  [99.98%]
                 0 kvm:kvm_cpuid                                                [99.98%]
             1,931 kvm:kvm_apic                                                 [99.98%]
            29,595 kvm:kvm_exit                                                 [99.98%]
            24,884 kvm:kvm_inj_virq                                             [99.98%]
                 0 kvm:kvm_inj_exception                                        [99.98%]
                 0 kvm:kvm_page_fault                                           [99.98%]
             1,986 kvm:kvm_msr                                                  [99.98%]
                 0 kvm:kvm_cr                                                   [99.98%]
                 0 kvm:kvm_pic_set_irq                                          [99.98%]
                 0 kvm:kvm_apic_ipi                                             [99.99%]
            25,953 kvm:kvm_apic_accept_irq                                      [99.99%]
            26,132 kvm:kvm_eoi                                                  [99.99%]
            26,593 kvm:kvm_pv_eoi                                               [99.99%]
                 0 kvm:kvm_nested_vmrun                                         [99.99%]
                 0 kvm:kvm_nested_intercepts                                    [99.99%]
                 0 kvm:kvm_nested_vmexit                                        [99.99%]
                 0 kvm:kvm_nested_vmexit_inject                                    [99.99%]
                 0 kvm:kvm_nested_intr_vmexit                                    [99.99%]
                 0 kvm:kvm_invlpga                                              [99.99%]
                 0 kvm:kvm_skinit                                               [99.99%]
               284 kvm:kvm_emulate_insn                                         [99.99%]
                68 kvm:vcpu_match_mmio                                          [99.99%]
                68 kvm:kvm_userspace_exit                                       [99.99%]
                 2 kvm:kvm_set_irq                                              [99.99%]
                 2 kvm:kvm_ioapic_set_irq                                       [99.99%]
            28,288 kvm:kvm_msi_set_irq                                          [99.99%]
                 1 kvm:kvm_ack_irq                                              [99.99%]
               131 kvm:kvm_mmio                                                 [100.00%]
               588 kvm:kvm_fpu                                                  [100.00%]
                 0 kvm:kvm_age_page                                             [100.00%]
                 0 kvm:kvm_try_async_get_page                                    [100.00%]
                 0 kvm:kvm_async_pf_doublefault                                    [100.00%]
                 0 kvm:kvm_async_pf_not_present                                    [100.00%]
                 0 kvm:kvm_async_pf_ready                                       [100.00%]
                 0 kvm:kvm_async_pf_completed

       1.002039622 seconds time elapsed

We see that # of exits is almost halved.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We set cpuid_level to -1 if there is no CPUID instruction (only
possible on i386).
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20120514174059.30236.1064.stgit@bluebook
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=12122
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This cpuid range does not exist on real HW and Intel spec says that
"Information returned for highest basic information leaf" will be
returned. Not very well defined.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When a host stops or suspends a VM it will set a flag to show this.  The
watchdog will use these functions to determine if a softlockup is real, or the
result of a suspended VM.
Signed-off-by: NEric B Munson <emunson@mgebm.net>
asm-generic changes Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch implements the kvm bits of the steal time infrastructure.
The most important part of it, is the steal time clock. It is an
continuous clock that shows the accumulated amount of steal time
since vcpu creation. It is supposed to survive cpu offlining/onlining.

[marcelo: fix build with CONFIG_KVM_GUEST=n]
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NRik van Riel <riel@redhat.com>
Tested-by: NEric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Avi Kivity <avi@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

To implement steal time, we need the hypervisor to pass the guest
information about how much time was spent running other processes
outside the VM, while the vcpu had meaningful work to do - halt
time does not count.

This information is acquired through the run_delay field of
delayacct/schedstats infrastructure, that counts time spent in a
runqueue but not running.

Steal time is a per-cpu information, so the traditional MSR-based
infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the
memory area address containing information about steal time

This patch contains the hypervisor part of the steal time infrasructure,
and can be backported independently of the guest portion.

[avi, yongjie: export delayacct_on, to avoid build failures in some configs]
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Tested-by: NEric B Munson <emunson@mgebm.net>
CC: Rik van Riel <riel@redhat.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NYongjie Ren <yongjie.ren@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

To implement steal time, we need the hypervisor to pass the guest information
about how much time was spent running other processes outside the VM.
This is per-vcpu, and using the kvmclock structure for that is an abuse
we decided not to make.

In this patchset, I am introducing a new msr, KVM_MSR_STEAL_TIME, that
holds the memory area address containing information about steal time

This patch contains the headers for it. I am keeping it separate to facilitate
backports to people who wants to backport the kernel part but not the
hypervisor, or the other way around.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NRik van Riel <riel@redhat.com>
Tested-by: NEric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch is simple, put in a different commit so it can be more easily
shared between guest and hypervisor. It just defines a named constant
to indicate the enable bit for KVM-specific MSRs.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NRik van Riel <riel@redhat.com>
Tested-by: NEric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

May otherwise generates build warnings about unused
kvm_read_and_reset_pf_reason if included without CONFIG_KVM_GUEST
enabled.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If guest can detect that it runs in non-preemptable context it can
handle async PFs at any time, so let host know that it can send async
PF even if guest cpu is not in userspace.
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When async PF capability is detected hook up special page fault handler
that will handle async page fault events and bypass other page faults to
regular page fault handler. Also add async PF handling to nested SVM
emulation. Async PF always generates exit to L1 where vcpu thread will
be scheduled out until page is available.
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Enable async PF in a guest if async PF capability is discovered.
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Guest enables async PF vcpu functionality using this MSR.
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Async PF also needs to hook into smp_prepare_boot_cpu so move the hook
into generic code.
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently x86 is the only architecture that uses kvm_guest_init(). With
PowerPC we're getting a second user, but the signature is different there
and we don't need to export it, as it uses the normal kernel init framework.

So let's move the x86 specific definition of that function over to the x86
specfic header file.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If the HV told us we can fully trust the TSC, skip any
correction
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This cpuid, KVM_CPUID_CLOCKSOURCE2, will indicate to the guest
that kvmclock is available through a new set of MSRs. The old ones
are deprecated.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Avi pointed out a while ago that those MSRs falls into the pentium
PMU range. So the idea here is to add new ones, and after a while,
deprecate the old ones.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Minimum HYPER-V implementation should have GUEST_OS_ID, HYPERCALL and
VP_INDEX MSRs.

[avi: fix build on i386]
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:

a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

Hypercalls can modify arbitrary regions of memory.  Make sure to indicate this
in the clobber list.  This fixes a hang when using KVM_GUEST kernel built with
GCC 4.3.0.

This was originally spotted and analyzed by Marcelo.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The kvm_* structs are obsoleted by the pvclock_* ones.
Now all users have been switched over and the old structs
can be dropped.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Hypercall based pte updates are faster than faults, and also allow use
of the lazy MMU mode to batch operations.

Don't report the feature if two dimensional paging is enabled.

[avi:
 - one mmu_op hypercall instead of one per op
 - allow 64-bit gpa on hypercall
 - don't pass host errors (-ENOMEM) to guest]

[akpm: warning fix on i386]
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add basic KVM paravirt support. Avoid vm-exits on IO delays.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is the host part of kvm clocksource implementation. As it does
not include clockevents, it is a fairly simple implementation. We
only have to register a per-vcpu area, and start writing to it periodically.

The area is binary compatible with xen, as we use the same shadow_info
structure.

[marcelo: fix bad_page on MSR_KVM_SYSTEM_TIME]
[avi: save full value of the msr, even if enable bit is clear]
[avi: clear previous value of time_page]
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch refactors the current hypercall infrastructure to better
support live migration and SMP.  It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.

A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace.  There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used.  There is no code
in tree that uses userspace hypercalls.

[avi: fix #ud injection on vmx]
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

This adds a special MSR based hypercall API to KVM. This is to be
used by paravirtual kernels and virtual drivers.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAvi Kivity <avi@qumranet.com>