- 19 3月, 2008 1 次提交
-
-
由 Prakash, Sathya 提交于
The system power state changes like hibernation and standby are not happening properly with 106XE controllers, this patch modifies the driver to free resources and allocate resources in power management entry points [jejb: compile fixes for upstream] Signed-off-by: NSathya Prakash <sathya.prakash@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 15 3月, 2008 2 次提交
-
-
由 Sven Schnelle 提交于
Fix NULL pointer dereference during execution of Internal commands, where gdth only allocates scp, but not scp->sense_buffer. The rest of the code assumes that sense_buffer is allocated, which leads to a kernel oops e.g. on reboot (during cache flush). Signed-off-by: NSven Schnelle <svens@stackframe.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 nickcheng 提交于
The Type B Adapter teardown does iounmap on pointers subtracted by a constant offset. Since the offset is in bytes, we need the pointers to be of type void * not uint32_t * so the subtraction is done in the correct units and we iounmap the correct area. Signed-off-by: NNick Cheng <nick.cheng@areca.com.tw> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 14 3月, 2008 2 次提交
-
-
由 Boaz Harrosh 提交于
Since the separation of sense_buffer from scsi_cmnd, Drivers that hack their own struct scsi_cmnd like here isd200, must also take care of their own sense_buffer. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
Delay bsg unregistration, because we want to wait until all the request/cmds have released their reference. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 09 3月, 2008 1 次提交
-
-
由 James Bottomley 提交于
We have several drivers that don't list SCSI as a dependency in Kconfig. That leads to them potentially being selected as Y even if SCSI is M (which will produce a build failure). Fix this by making the if SCSI_LOWLEVEL that goes around all the drivers a tristate forcing them all automatically to inherit the value of SCSI. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 08 3月, 2008 1 次提交
-
-
由 Matthew Wilcox 提交于
buf[i] can be up to 0xfd, so doubling it and assigning the result to an unsigned char truncates the value. Just use an unsigned int instead; it's only a temporary. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 07 3月, 2008 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25: sh: Fix up the sh64 build. sh: Fix up SH7710 VoIP-GW build. sh: Flag PMB support as EXPERIMENTAL. sh: Update r7780mp defconfig. fb: hitfb: Balance probe/remove section annotations. sh: hp6xx: Fix up hp6xx_apm build failure. fb: pvr2fb: Fix up remaining section mismatch. sh: Fix up section mismatches. sh: hp6xx: Correct APM output. sh: update se7780 defconfig sh: replace remaining __FUNCTION__ occurrences sh: export copy-page() to modules sh_ksyms_32.c update for gcc 4.3 sh/mm/pg-sh7705.c must #include <linux/fs.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: [Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0 [Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markings [Blackfin] arch: fix bug - allow SDH driver to be used as module [Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscalls
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] kprobes arch consolidation build fix [IA64] update efi region debugging to use MB, GB and TB as well as KB [IA64] use dev_printk in video quirk [IA64] remove remaining __FUNCTION__ occurrences [IA64] remove unnecessary nfs includes from sys_ia32.c [IA64] remove CONFIG_SMP ifdef in ia64_send_ipi() [IA64] arch_ptrace() cleanup [IA64] remove duplicate code from arch_ptrace() [IA64] convert sys_ptrace to arch_ptrace [IA64] remove find_thread_for_addr() [IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM [IA64] access user RBS directly
-
由 Harvey Harrison 提交于
ia64 named their handler kprobes_fault_handler while all other arches used kprobe_fault_handler. Change the function definition and header declaration. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Simon Horman 提交于
When EFI_DEBUG is defined to a non-zero value in arch/ia64/kernel/efi.c, the efi memory regions are displayed. This patch enhances the display code in a few ways: 1. Use TB, GB and MB as well as KB as units. Although this introduces rounding errors (KB doesn't as size is always a multiple of 4Kb), it does make things a lot more readable. Also as the range is also shown, it is possible to note the exact size if it is important. In my experience, the size field is mostly useful for getting a general idea of the size of a region. On the rx2620 that I use, there actually is an 8TB region (though not backed by physical memory, and 8TB really is a lot more readable than 8589934592KB. 2. pad the size field with leading spaces to further improve readability ... ... ( 8MB) ... ( 928MB) ... ( 3MB) ... vs ... ... (8MB) ... (928MB) ... (3MB) ... 3. Pad the attr field out to 64bits using leading zeros, to further improve readability. ... mem05: type= 2, attr=0x0000000000000008, range=[0x0000000004000000-0x000000000481f000) ( 8MB) mem06: type= 7, attr=0x0000000000000008, range=[0x000000000481f000-0x000000003e876000) ( 928MB) mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) ( 3MB) mem08: type= 4, attr=0x0000000000000008, range=[0x000000003eb8e000-0x000000003ee7a000) ( 2MB) ... ... mem05: type= 2, attr=0x8, range=[0x0000000004000000-0x000000000481f000) ( 8MB) mem06: type= 7, attr=0x8, range=[0x000000000481f000-0x000000003e876000) ( 928MB) mem07: type= 5, attr=0x8000000000000008, range=[0x000000003e876000-0x000000003eb8e000) ( 3MB) mem08: type= 4, attr=0x8, range=[0x000000003eb8e000-0x000000003ee7a000) ( 2MB) ... 4. Use %d instead of %u for the index field, as i is a signed int. N.B: This code is not compiled unless EFI_DEBUG is non 0. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Bjorn Helgaas 提交于
Convert quirk printks to dev_printk(). Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Long lines have been kept where they exist, some small spacing changes have been done. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 KOSAKI Motohiro 提交于
Compilation of 2.6.25-rc2-mm1 on ia64 generates many warnings. IA64 support 2 ELF format (IA64 binary and IA32 binary), thus if 2 elf related header included, cause many warning or error. about 2 week ago, J. Bruce Fields proposed this problem fixed patch. (http://marc.info/?l=linux-ia64&m=120329313305695&w=2) Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Bjorn Helgaas 提交于
When !CONFIG_SMP, cpu_physical_id() is ia64_get_lid(), which is functionally identical to (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff so there's no need for two versions of this code. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] xcbc: Fix crash with IPsec [CRYPTO] xts: Use proper alignment [CRYPTO] digest: Include internal.h for prototypes [CRYPTO] authenc: Add missing Kconfig dependency on BLKCIPHER [CRYPTO] skcipher: Move chainiv/seqiv into crypto_blkcipher module
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix inode leak in xfs_iget_core() [XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too many
-
由 David Woodhouse 提交于
Commit ed7b1889 removed page.h from include/asm-generic/Kbuild so that it shouldn't get exported. However, it was redundantly listed in asm-mn10300/Kbuild and asm-x86/Kbuild too. Remove those as well, so it really stops being exported on those architectures. Also remove the redundant listing of ptrace.h and termios.h from mn10300. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 3月, 2008 21 次提交
-
-
由 Joy Latten 提交于
When using aes-xcbc-mac for authentication in IPsec, the kernel crashes. It seems this algorithm doesn't account for the space IPsec may make in scatterlist for authtag. Thus when crypto_xcbc_digest_update2() gets called, nbytes may be less than sg[i].length. Since nbytes is an unsigned number, it wraps at the end of the loop allowing us to go back into loop and causing crash in memcpy. I used update function in digest.c to model this fix. Please let me know if it looks ok. Signed-off-by: NJoy Latten <latten@austin.ibm.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Sebastian Siewior 提交于
The XTS blockmode uses a copy of the IV which is saved on the stack and may or may not be properly aligned. If it is not, it will break hardware cipher like the geode or padlock. This patch encrypts the IV in place so we don't have to worry about alignment. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Tested-by: NStefan Hellermann <stefan@the2masters.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The only board-specific bits that existed here were for setting up the IRQs, which are now handled by the SH7710 CPU support code instead. As there's nothing else to do for setup, kill off the board support code and have the defconfig use the generic machvec instead. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
There's still work that needs to be done here, and this should not be enabled by default on existing boards. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This disables the PMB/32BIT=y by default in r7780mp, as turning this on presently results in build errors (for an admittedly experimental feature). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 David Chinner 提交于
If the radix_tree_preload() fails, we need to destroy the inode we just read in before trying again. This could leak xfs_vnode structures when there is memory pressure. Noticed by Christoph Hellwig. SGI-PV: 977823 SGI-Modid: xfs-linux-melb:xfs-kern:30606a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
wakeups Idle state is not being detected properly by the xfsaild push code. The current idle state is detected by an empty list which may never happen with mostly idle filesystem or one using lazy superblock counters. A single dirty item in the list that exists beyond the push target can result repeated looping attempting to push up to the target because it fails to check if the push target has been acheived or not. Fix by considering a dirty list with everything past the target as an idle state and set the timeout appropriately. SGI-PV: 977545 SGI-Modid: xfs-linux-melb:xfs-kern:30532a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Paul Mundt 提交于
hitfb presently has probe using __init whilst remove uses __devexit. As this device can't possibly be hotplugged, switch to __exit and __exit_p() instead. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Building with CONFIG_DEBUG_SECTION_MISMATCH=y reports: CC drivers/video/pvr2fb.o LD drivers/video/built-in.o WARNING: drivers/video/built-in.o(.text+0xb9b0): Section mismatch in reference from the function pvr2fb_check_var() to the variable .devinit.data:pvr2_fix The function pvr2fb_check_var() references the variable __devinitdata pvr2_fix. This is often because pvr2fb_check_var lacks a __devinitdata annotation or the annotation of pvr2_fix is wrong. This is obviously crap as no such reference exists, but it's a bit closer to reality from older versions which blamed the PCI table. The real problem was a reference to pvr2_var.vmode from pvr2fb_check_var(), as pvr2_var is flagged as __devinitdata (pvr2_fix is also, so at least that part is right). pvr2_var.vmode is just a fancy way of saying FB_VMODE_NONINTERLACED, so we just reference that explicitly instead. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kristoffer Ericson 提交于
This patch fixes the old non-verbose hp6xx apm code and enables some very basic apm output. We now get percentage (battery) output and basic time estimate. Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 goda.yusuke 提交于
This patch updates se7780_defconfig Signed-off-by: NYusuke Goda <goda.yusuke@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Andrew Morton 提交于
ERROR: "copy_page" [fs/unionfs/unionfs.ko] undefined! like all the other architectures. Cc: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian Bunk 提交于
This patch fixes the following build error with landisk_defconfig when using gcc 4.3: <-- snip --> ... MODPOST 50 modules ERROR: "__udivsi3_i4i" [net/sunrpc/sunrpc.ko] undefined! ERROR: "__udivsi3_i4i" [net/appletalk/appletalk.ko] undefined! ERROR: "__udivsi3_i4i" [fs/ufs/ufs.ko] undefined! ERROR: "__udivsi3_i4i" [fs/ntfs/ntfs.ko] undefined! ERROR: "__sdivsi3_i4i" [fs/ntfs/ntfs.ko] undefined! ERROR: "__udivsi3_i4i" [fs/nfsd/nfsd.ko] undefined! ERROR: "__sdivsi3_i4i" [fs/nfsd/nfsd.ko] undefined! ERROR: "__udivsi3_i4i" [fs/nfs/nfs.ko] undefined! ERROR: "__udivsi3_i4i" [fs/lockd/lockd.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/usb/storage/usb-storage.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/usb/serial/pl2303.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/usb/serial/pl2303.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/usb/serial/ftdi_sio.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/usb/misc/sisusbvga/sisusbvga.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/usb/misc/sisusbvga/sisusbvga.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/media/video/v4l1-compat.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/v4l1-compat.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/usbvideo/vicam.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/media/video/usbvideo/usbvideo.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/usbvideo/usbvideo.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/media/video/sn9c102/sn9c102.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/sn9c102/sn9c102.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/se401.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/media/video/pwc/pwc.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/md/raid0.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/md/md-mod.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/md/md-mod.ko] undefined! ERROR: "__udivsi3_i4i" [drivers/md/linear.ko] undefined! ERROR: "__sdivsi3_i4i" [drivers/hid/usbhid/usbhid.ko] undefined! make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error: <-- snip --> ... CC arch/sh/mm/pg-sh7705.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c: In function 'ptep_get_and_clear': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c:130: error: implicit declaration of function 'mapping_writably_mapped' make[2]: *** [arch/sh/mm/pg-sh7705.o] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
git://git.infradead.org/~dedekind/ubi-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/~dedekind/ubi-2.6: UBI: mtd/ubi/vtbl.c: fix memory leak UBI: fix sparse errors in ubi.h UBI: fix error message UBI: silence warning
-
由 FUJITA Tomonori 提交于
On 32bits boxes, boundary_size becomes zero due to a overflow and we hit BUG_ON in iommu_is_span_boundary. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Acked-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-