* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Fix early boot GFP_DMA allocations
  SLUB: Don't print out OOM warning for __GFP_NOFAIL
  SLUB: fix build when !SLUB_DEBUG
  SLUB: Out-of-memory diagnostics
  slab: document kzfree() zeroing behavior
  slab: fix generic PAGE_POISONING conflict with SLAB_RED_ZONE
  slob: use PG_slab for identifying SLOB pages

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits)
  MIPS: Add hibernation support
  MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h
  MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.
  MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.
  Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
  MIPS: TLB support for hugetlbfs.
  MIPS: Add hugetlbfs page defines.
  MIPS: Add support files for hugetlbfs.
  MIPS: Remove unused parameters from iPTE_LW.
  Staging: Add octeon-ethernet driver files.
  MIPS: Export erratum function needed by octeon-ethernet driver.
  MIPS: Cavium-Octeon: Add more chip specific feature tests.
  MIPS: Cavium-Octeon: Add more board type constants.
  MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.
  MIPS: Add named alloc functions to OCTEON boot monitor memory allocator.
  MIPS: Alchemy: devboards: Convert to gpio calls.
  MIPS: Alchemy: xxs1500: use linux gpio api.
  MIPS: Alchemy: MTX-1: Use linux gpio api.
  MIPS: Alchemy: Rewrite GPIO support.
  MIPS: Alchemy: Remove unused au1000_gpio.h header
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  get rid of BKL in fs/sysv
  get rid of BKL in fs/minix
  get rid of BKL in fs/efs
  befs ->pust_super() doesn't need BKL
  Cleanup of adfs headers
  9P doesn't need BKL in ->umount_begin()
  fuse doesn't need BKL in ->umount_begin()
  No instance of ->bmap() needs BKL
  remove unlock_kernel() left accidentally
  ext4: avoid unnecessary spinlock in critical POSIX ACL path
  ext3: avoid unnecessary spinlock in critical POSIX ACL path

[Ralf: SMP support requires CPU hotplugging which MIPS currently doesn't
support.  As implemented in this patch cache and tlb flushing will also be
invoked with interrupts disabled so smp_call_function() will blow up in
charming ways.  So limit to !SMP.]
Reviewed-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NYan Hua <yanh@lemote.com>
Reviewed-by: NArnaud Patard <apatard@mandriva.com>
Reviewed-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NHu Hongbing <huhb@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We had an ugly #ifdef for Cavium Octeon hwrena bits in traps.c, remove
it to mach-cavium-octeon/cpu-feature-overrides.h
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some CPUs have implementation dependent rdhwr registers.  Allow them
to be enabled on a per CPU basis.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add new kconfig variables SYS_SUPPORTS_HUGETLBFS and
CPU_SUPPORTS_HUGEPAGES.  They are enabled for systems that are known
to support huge pages.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'.  Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
CC: William Irwin <wli@holomorphy.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The TLB handlers need to check for huge pages and give them special
handling.  Huge pages consist of two contiguous sub-pages of physical
memory.

* Loading entrylo0 and entrylo1 need to be handled specially.

* The page mask must be set for huge pages and then restored after
  writing the TLB entries.

* The PTE for huge pages resides in the PMD, we halt traversal of the
  tables there.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The l parameter to iPTE_LW() is unused. Remove it and from some of its
callers as well.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs.  These SOCs are
multi-core mips64 processors with existing support over in arch/mips.

The driver files can be categorized into three basic groups:

1) Register definitions, these are named cvmx-*-defs.h

2) Main driver code, these have names that don't start cvmx-.

3) Interface specific functions and other utility code, names starting
with cvmx-
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The octeon-ethernet driver needs to check for additional chip specific
features, we add them to the octeon_has_feature() framework.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The bootloader now uses additional board type constants.  The
octeon-ethernet driver needs some of the new values.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The various Octeon ethernet drivers use these new functions.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Replace a few open-coded GPIO register accesses with gpio calls.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Replace a few GPIO register accesses in the board init code with calls to
the gpio api.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Replace a few GPIO register accesses in the board init code with calls
to the gpio api.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current in-kernel Alchemy GPIO support is far too inflexible for
all my use cases.  To address this, the following changes are made:

* create generic functions which deal with manipulating the on-chip
  GPIO1/2 blocks.  Such functions are universally useful.
* Macros for GPIO2 shared interrupt management and block control.
* support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros.

  If CONFIG_GPIOLIB is not enabled, provide linux gpio framework
  compatibility by directly inlining the GPIO1/2 functions.  GPIO access
  is limited to on-chip ones and they can be accessed as documented in
  the datasheets (GPIO0-31 and 200-215).

  If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and
  one for GPIO2, are registered.  GPIOs can still be accessed by using
  the numberspace established in the databooks.

  However this is not yet flexible enough for my uses:  My Alchemy
  systems have a documented "external" gpio interface (fixed, different
  numberspace) and can support a variety of baseboards, some of which
  are equipped with I2C gpio expanders.  I want to be able to provide
  the default 16 GPIOs of the CPU board numbered as 0..15 and also
  support gpio expanders, if present, starting as gpio16.

  To achieve this, a new Kconfig symbol for Alchemy is introduced,
  CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal
  that they don't want the Alchemy numberspace exposed to the outside
  world, but instead want to provide their own.  Boards are now respon-
  sible for providing the linux gpio interface glue code (either in a
  custom gpio.h header (in board include directory) or with gpio_chips).

  To make the board-specific inlined gpio functions work, the MIPS
  Makefile must be changed so that the mach-au1x00/gpio.h header is
  included _after_ the board headers, by moving the inclusion of
  the mach-au1x00/ to the end of the header list.

  See arch/mips/include/asm/mach-au1x00/gpio.h for more info.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

gpio_direction_output should also set an output value according to the API.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> 
Acked-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 o Rewrite to use <asm-generic/ioctl.h>.  Cuts down the file from 40 to
   16 lines.
 o Delete _IOC_VOID, _IOC_OUT, _IOC_IN and _IOC_INOUT.  They were added
   for 2.1.14 but I was not able to find any user - not even historical
   ones.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add platform support for RNG of TX4939 SoC.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds support for the integrated RNG of the TX4939 SoC.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a sysdev to access SRAM in TXx9 SoCs via sysfs.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CFE is the only supported and used bootloader on the SiByte boards,
the standalone kernel support has been never used outside Broadcom.
Remove it and make the kernel use CFE by default.
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch removes the SiByte simulation Kconfig option, which only modified
a printk.
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch makes sure that we are not going to clear
or change the interrupt status of a GPIO interrupt
superior to 13 as this is the maximum number of GPIO
interrupt source (p.232 of the RC32434 reference manual).
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove commented out definitions.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CPU_CAVIUM_OCTEON is mips_r2 which is handled before the switch.  This
label in the switch statement is dead code, so we remove it.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Reviewed by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Octeon has no execution hazards, so we can remove them and save an
instruction per TLB handler invocation.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Reviewed by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some CPUs do not need ehb instructions after writing CP0 registers.
By allowing ehb generation to be overridden in
cpu-feature-overrides.h, we can save a few instructions in the TLB
handler hot paths.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Try to fold the 64-bit TLB refill handler opportunistically at the
beginning of the vmalloc path so as to avoid splitting execution flow in
half and wasting cycles for a branch required at that point then.  Resort
to doing the split if either of the newly created parts would not fit into
its designated slot.
Original-patch-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The logic used to split the r4000 refill handler is liberally
sprinkled with magic numbers.  We attempt to explain what they are and
normalize them against a new symbolic value (MIPS64_REFILL_INSNS).

CC: David VomLehn <dvomlehn@cisco.com>
Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add platform support for ACLC of TXx9 SoCs.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds support for PCI and PCIe to the base Cavium OCTEON
processor support.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we add the register definitions for the processor blocks used by
the following PCI support patch.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>