In alloc_token(), the token '1' would be allocated twice consecutively.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid usage of command work entry in cmd_work_handler since it can be released
by mlx5_cmd_invoke before the work handler returns to running.
Signed-off-by: NIra Gusinsky <irenag@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid copying to the output buffer in cmd_exec since this is done after the
command is completed. Failure to do this may cause cases where the callback
handler is called before the copy done by cmd_exec which then overwrites it.
Reported-by: NTamer Hleihel <tamerh@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use coherent memory for the commands descriptor page. Take measures to make
sure the page is aligned to MLX5_ADAPTER_PAGE_SIZE as required by the hardware.
Reported-by: NYevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct mlx5_query_mkey_mbox_in rather than mlx5_destroy_mkey_mbox_in
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do it in one place instead of every where the function is invoked
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PRM does not support setting these values so avoid setting them.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Put a line of space before return and next statement.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass 0 in the sqd_event parameter.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allocate firmware pages from the NUMA node which is close to the device.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: remove some unnecessary complexity

The TIPC code is unnecessarily complex in some places, often because
the conditions or assumptions that were the cause for the complexity
are not valid anymore.

In these three commits, we eliminate some cases of such redundant
complexity.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a link is being established, the two endpoints advertise their
respective interface MTU in the transmitted RESET and ACTIVATE messages.
If there is any difference, the lower of the two MTUs will be selected
for use by both endpoints.

However, as a remnant of earlier attempts to introduce TIPC level
routing. there also exists an MTU discovery mechanism. If an intermediate
node has a lower MTU than the two endpoints, they will discover this
through a bisectional approach, and finally adopt this MTU for common use.

Since there is no TIPC level routing, and probably never will be,
this mechanism doesn't make any sense, and only serves to make the
link level protocol unecessarily complex.

In this commit, we eliminate the MTU discovery algorithm,and fall back
to the simple MTU advertising approach. This change is fully backwards
compatible.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a bearer is disabled manually, all its links have to be reset
and deleted. However, if there is a remaining, parallel link ready
to take over a deleted link's traffic, we currently delay the delete
of the removed link until the failover procedure is finished. This
is because the remaining link needs to access state from the reset
link, such as the last received packet number, and any partially
reassembled buffer, in order to perform a successful failover.

In this commit, we do instead move the state data over to the new
link, so that it can fulfill the procedure autonomously, without
accessing any data on the old link. This means that we can now
proceed and delete all pertaining links immediately when a bearer
is disabled. This saves us from some unnecessary complexity in such
situations.

We also choose to change the confusing definitions CHANGEOVER_PROTOCOL,
ORIGINAL_MSG and DUPLICATE_MSG to the more descriptive TUNNEL_PROTOCOL,
FAILOVER_MSG and SYNCH_MSG respectively.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 8b4ed863
("tipc: eliminate race condition at dual link establishment")
we introduced a parallel link synchronization mechanism that
guarentees sequential delivery even for users switching from
an old to a newly established link. The new mechanism makes it
unnecessary to deliver the tunneled duplicate packets back to
the old link, as we are currently doing. It is now sufficient
to use the last tunneled packet's inner sequence number as
synchronization point between the two parallel links, whereafter
it can be dropped.

In this commit, we drop the duplicate packets arriving on the new
link, after updating the synchronization point at each new arrival.

Although it would now have been sufficient for the other endpoint
to only tunnel the last packet in its send queue, and not the
entire queue, we must still do this to maintain compatibility
with older nodes.

This commit makes it possible to get rid if some complex
interaction between the two parallel links.
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
Mellanox mlx4 driver updates

The main feature added by this series are Ido's changes to support
Granular QoS for VFs, where for the time being only max rate is supported.

Muhammad added support for setting rx-fcs and rx-all through ethtool,
and Ido did the interface identify work.

Last, add Ido as a maintainer for the mlx4 Ethernet driver!

Some of next week is the Passover holiday here and I will be
mostly OOO. If needed (...) Ido or Amir will send V1 and such.

Rebased against net-next commit 033f46b3 "crypto: algif -
explicitly mark end of data".
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add Ido Shamay as co-maintainer for the mlx4 Ethernet driver.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enabled when the device supports KEEP FCS and IGNORE FCS.

When the flag is set, pass all received frames up the stack,
even ones with invalid FCS, controlled by ethtool.
Signed-off-by: NMuhammad Mahajna <muhammadm@mellanox.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enabled when device supports KEEP FCS. When the flag is set, Ethernet FCS
is appended to the end of the frame, controlled by ethtool.
Signed-off-by: NMuhammad Mahajna <muhammadm@mellanox.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the interface ethtool identify feature.

Make the physical port LED to blink with green and yellow colors.

The device handles the LED blink by itself (synchrous use of
set_phys_id), by returning 0 to ETHTOOL_ID_ACTIVE command.
Signed-off-by: NEyal Grossman <eyalgr@mellanox.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The calls to SET_PORT used hard-code numbers, when supplying command's
opcode modifiers, fix that to use well defined constants.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If HCA supports ETS QoS feature, set enhanced QoS bit in init_hca as default.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A new capability bit was introduced in the past to to differ devices
using the QoS ETS feature. The old was deprecated since then.
If driver sees device which set only the old capabilty, it will print
warning to user suggesting to upgrade the FW.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support granular QoS per VF, by implementing the ndo_set_vf_rate.

Enforce a rate limit per VF when called, and enabled only for VFs in
VST mode with user priority supported by the device.

We don't enforce VFs to be in VST mode at the moment of configuration,
but rather save the given rate limit and enforce it when the VF is
moved to VST with user priority which is supported (currently 0).

VST<->VGT or VST qos value state changes are disallowed when a rate
limit is configured. Minimum BW share is not supported yet.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Granular QoS per VF feature introduce a new QP field, qos_vport.

PF administrator can connect VF QPs to a certain QoS Vport, to
inherit its proporties. Connecting QPs to the default QoS Vport
(defined as 0) is always allowed, even when there are no allocated VPPs.
At this point, only the default vport is connected to QPs.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialization of granular Qos per VF mechanism.

Query the port availible VPPs and allocates those on all supported
priorities in an equal share. Allocation is done only in SRIOV mode,
when the feature is supported by the device and port type is Ethernet.

Allocation currently is done only on the default priority 0.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Checks in QUERY_DEV_CAP if the granular QoS per VF feature is
supported by the device. Disabled for guests.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the SET_VPORT_QOS device command, which is ntended for virtual
granular QoS configuration per VF in SRIOV mode. The SET_VPORT_QOS
command sets and queries QoS parameters of a VPort. Each priority
allowed for a VPort is assigned with a share of the BW, and a BW
limitation. QoS parameters can be modified at any time, but must be
initialized before any QP is associated with the VPort.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implements device ALLOCATE_VPP command, to be used for granular QoS
configuration of VFs by the PF device. Defines and queries the amount
of VPPs assigned to each port, and the amount of VPPs assigned to each
priority of each port. Once the total VPPs are split between the priorities
of a port, they may be assigned with a share of the BW or a rate limit.

Split into two functions (get/set) whoch are supplied with
mlx4_alloc_vpp_context and physical port number.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create two new files fw_qos.h and fw_qos.c in mlx4_core module.

It gathers all relevant QoS firmware related commands etc, thus improving
encapsulation of the mlx4_core module. For now it contains the QoS existing
commands: mlx4_SET_PORT_SCHEDULER and mlx4_SET_PORT_PRIO2TC.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previous vf_oper and vf_admin code created very long lines, making it hard
to read the code. Added relevant in-struct pointers to reduce code
complexity and avoid code lines spread over 80 lines. Same logic is preserved.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently implemented as static function in resource_tracker.c --
this change will allow other files in mlx4_core to use it as well.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently any change of netdev features results in a call to
mlx4_en_update_loopback_state(). Those calls are unnecessary,
and should be called only upon loopback feature change.

Also moved some of the logic into mlx4_en_update_loopback_state().
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable RSS support for fragmented IP packets, when device supports it.
Until now, fragmented IP packets were directed only to the default_qpn.
Since IP fragments (datagram) have no upper protocols (L3 IP packets),
hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW
makes sure that this holds for the 1st fragment too, so all fragments
go to the same QP.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/usb/asix_common.c
	drivers/net/usb/sr9800.c
	drivers/net/usb/usbnet.c
	include/linux/usb/usbnet.h
	net/ipv4/tcp_ipv4.c
	net/ipv6/tcp_ipv6.c

The TCP conflicts were overlapping changes.  In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.

With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull dmaengine fixes from Vinod Koul:
 "This time we have addition of caps for jz4740 which fixes intentional
  warning at boot.  Then we have memory leak issues in drivers using
  virt-dma by Peter on few drive"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: moxart-dma: Fix memory leak when stopping a running transfer
  dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer
  dmaengine: omap-dma: Fix memory leak when terminating running transfer
  dmaengine: edma: fix memory leak when terminating running transfers
  dmaengine: jz4740: Define capabilities

Pull networking fixes from David Miller:

 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from
    Johannes Berg.

 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry
    Finger.

 3) Need to use for_each_netdev_safe() in rtnl_group_changelink()
    otherwise we can crash, from WANG Cong.

 4) mlx4 driver does register_netdev() too early in the probe sequence,
    from Ido Shamay.

 5) Don't allow router discovery hop limit to decrease the interface's
    hop limit, from D.S. Ljungmark.

 6) tx_packets and tx_bytes improperly accounted for certain classes of
    USB network devices, fix from Ben Hutchings.

 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr
    tables in the error path, they must instead use ip{6}mr_free_table().
    Fix from WANG Cong.

 8) cxgb4 doesn't properly quiesce all RX activity before unregistering
    the netdevice.  Fix from Hariprasad Shenai.

 9) Fix hash corruptions in ipvlan driver, from Jiri Benc.

10) nla_memcpy(), like a real memcpy, should fully initialize the
    destination buffer, even if the source attribute is smaller.  Fix
    from Jiri Benc.

11) Fix wrong error code returned from iucv_sock_sendmsg().  We should
    use whatever sock_alloc_send_skb() put into 'err'.  From Eugene
    Crosser.

12) Fix slab object leak on module unload in TIPC, from Ying Xue.

13) Need a READ_ONCE() when reading the cached RX socket route in
    tcp_v{4,6}_early_demux().  From Michal Kubecek.

14) Still too many problems with TPC support in the ath9k driver, so
    disable it for now.  From Felix Fietkau.

15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from
    Larry Finger.

16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian
    King.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  cxgb4: Fix to dump devlog, even if FW is crashed
  cxgb4: Firmware macro changes for fw verison 1.13.32.0
  bnx2x: Fix kdump when iommu=on
  bnx2x: Fix kdump on 4-port device
  mac80211: fix RX A-MPDU session reorder timer deletion
  MAINTAINERS: Update Intel Wired Ethernet Driver info
  tipc: fix a slab object leak
  net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet
  af_iucv: fix AF_IUCV sendmsg() errno
  openvswitch: Return vport module ref before destruction
  netlink: pad nla_memcpy dest buffer with zeroes
  bonding: Bonding Overriding Configuration logic restored.
  ipvlan: fix check for IP addresses in control path
  ipvlan: do not use rcu operations for address list
  ipvlan: protect against concurrent link removal
  ipvlan: fix addr hash list corruption
  net: fec: setup right value for mdio hold time
  net: tcp6: fix double call of tcp_v6_fill_cb()
  cxgb4vf: Fix sparse warnings
  netns: don't clear nsid too early on removal
  ...

Nicolas Dichtel says:

====================
Remove iflink field from the net_device structure

The first goal of this series was to advertise the veth peer via the IFLA_LINK
attribute, but iflink was not ready for network namespaces.

The iflink of an interface should be set to its ifindex for a physical interface
and to another value (0 if not relevant) for a virtual interface.
This was not the case for some interfaces, like vxlan, bond, or bridge for
example.
There is also a risk, if the targeted interface moves to another netns, that the
ifindex changes without updating corresponding iflink fields (eg. vlan).

Moving the management of this property into virtual interface drivers allows to
better handle this last case because most of virtual interface drivers have a
pointer to the link netdevice.
Anyway, dev->iflink value was always a copy of some internal data of the virtual
interface driver, thus let's use these internal data directly.

So, this series removes the iflink field and let the drivers manage it.
Only the last patch was present in the v1, but I fully rework it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the peer netns is advertised in rtnl messages, we can set this property
so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get
the full veth configuration.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Virtual interfaces are supposed to set an iflink value != of their ifindex.
It was not the case for some of them, like vxlan, bond or bridge.
Let's set iflink to 0 when dev->rtnl_link_ops is set.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that all users of iflink have the ndo_get_iflink handler available, it's
possible to remove this field.

By default, dev_get_iflink() returns the ifindex of the interface.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>