- 01 10月, 2010 5 次提交
-
-
由 Tilman Schmidt 提交于
Recover from a lost HD_RECEIVEATDATA_ACK message by sending a zero-length HD_READ_ATMESSAGE command when ev_layer sends "+++". Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
In error_reset(), if sending HD_RESET_INTERRUPT_PIPE to the device fails, try performing an USB reset. Also correct an error in the leading comment. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Use setup_timer() and mod_timer() instead of direct assignment to timer structure members, simplify the argument of one timer routine, and make extra sure all timers are stopped during suspend. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Rework the handling of USB errors in AT response reads to fix a possible infinite retry loop and a memory leak, and silence a few overly verbose kernel messages. Signed-off-by: NTilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Unlock cs->lock before calling error_hangup() which is marked "cs->lock must not be held". Signed-off-by: NTilman Schmidt <tilman@imap.cc> CC: stable <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
I moved the kfree(cb) below the dereferences. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2010 2 次提交
-
-
由 Tilman Schmidt 提交于
With CONFIG_GIGASET_DEBUG set, every isochronous USB frame after an erroneous one was checked for more errors. This produced only noise messages in practice, so drop it. Impact: cleanup Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Change the Gigaset driver's internal write_cmd interface to accept a cmdbuf structure instead of a string. This avoids copying formatted AT commands a second time. Impact: optimization Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2010 1 次提交
-
-
由 Tilman Schmidt 提交于
Commit 5a0e3ad6 causes slab.h to be included twice in many of the Gigaset driver's source files, first via the common include file gigaset.h and then a second time directly. Drop the spares, and use the opportunity to clean up a few more similar cases. Impact: cleanup, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> CC: Tejun Heo <tj@kernel.org> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2010 1 次提交
-
-
由 Tilman Schmidt 提交于
Improve readability of the Gigaset driver's kernel messages by removing a few unnecessary messages and limiting the emission of some debug messages more narrowly. Impact: logging Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Changed function pointer use from non-majority address-of style to majority short form without & via: grep -rPl "\btasklet_init\s*\([^,\)]+,\s*\&" drivers/isdn | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\btasklet_init\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Compile tested allyesconfig x86 Signed-off-by: NJoe Perches <joe@perches.com> drivers/isdn/gigaset/bas-gigaset.c | 4 ++-- drivers/isdn/gigaset/common.c | 2 +- drivers/isdn/gigaset/interface.c | 2 +- drivers/isdn/gigaset/ser-gigaset.c | 2 +- drivers/isdn/gigaset/usb-gigaset.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
On the quest for the holy grail of checkpatch.pl silence. Impact: cosmetic Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2009 3 次提交
-
-
由 Tilman Schmidt 提交于
Reorganize the code of the Gigaset driver, moving all isdn4linux dependencies to the source file i4l.c so that it can be replaced by a file capi.c interfacing to Kernel CAPI instead. Impact: refactoring, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
When the Gigaset base stops responding, try resetting the USB connection to recover. Impact: error handling improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Don't drop the remainder of an URB if an isochronous frame has an error. Impact: error handling improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
The tasklets for isochronous data transfer need to run within 8 msec to avoid over/underruns, so schedule them with high priority to fix reported issues with occasional over/underruns. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2009 1 次提交
-
-
由 Tilman Schmidt 提交于
Every USB transfer buffer has to be allocated individually by kmalloc. Impact: bugfix, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Tested-by: NKolja Waschk <kawk@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 12月, 2008 1 次提交
-
-
由 Tilman Schmidt 提交于
Switch from private printk wrapper macros to using pr_err() and pr_info() from linux/kernel.h, at the same time unifying a few error messages. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2008 1 次提交
-
-
由 Tilman Schmidt 提交于
Join the move away from the obsolete info() macro, opencoding the remaining uses. While we're at it, also get rid of the warn() macro by promoting the three remaining uses to err(). Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2008 1 次提交
-
-
由 Tilman Schmidt 提交于
ifd->offset is unsigned. gigaset_isowbuf_getbytes() may return signed unnoticed. Revised version of patch originally submitted by Roel Kluin <12o3l@tiscali.nl>. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 2月, 2008 5 次提交
-
-
由 Tilman Schmidt 提交于
Fix the initialization and reference counting of the Gigaset driver modules so that they can be unloaded when they are not actually in use. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Greg KH <gregkh@suse.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Convert atomic_t variables that don't actually use atomic_t functionality to int. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Add basic suspend/resume support to the bas_gigaset ISDN driver for the Siemens Gigaset SX255 series of ISDN DECT bases. Only the USB aspects are handled so far; the ISDN subsystem is not notified in any way, for lack of information about how to do that. The driver will refuse to suspend if a connection is active. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Greg KH <gregkh@suse.de> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Some cleanups to the bas-gigaset and usb-gigaset USB ISDN drivers: - simplified error handling - improved debug messages - readability improvements - removal of obsolete defines and comments Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Greg KH <gregkh@suse.de> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Make there only be one reference to urb->status per URB callback, and none outside, in preparation for removal of that field. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Greg KH <gregkh@suse.de> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Tilman Schmidt 提交于
Remove pointless taking of spinlock around reading a single pointer-sized or smaller variable. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 3月, 2007 1 次提交
-
-
由 Tilman Schmidt 提交于
Mark some static arrays as const that aren't and shouldn't be modified, and remove incorrect static attribute from some variables. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
drivers/isdn/gigaset/bas-gigaset.c: In function 'dump_urb': drivers/isdn/gigaset/bas-gigaset.c:258: error: 'struct urb' has no member named 'bandwidth' Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 12月, 2006 1 次提交
-
-
由 Tilman Schmidt 提交于
Eliminate some possibilities for user processes writing to the Gigaset character device to be left sleeping indefinitely, by adding wakeup calls to error paths and properly disposing of pending write requests when the device is disconnected. It also removes unnecessary NULL checks before usb_free_urb() and usb_kill_urb() calls. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 12月, 2006 2 次提交
-
-
由 Christoph Lameter 提交于
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 28 9月, 2006 1 次提交
-
-
由 Pete Zaitcev 提交于
The purpose of this patch is to split off the case when a device does not reply on the lower level (which is reported by HC hardware), and a case when the device accepted the request, but does not reply at upper level. This redefinition allows to diagnose issues easier, without asking the user if the -110 happened "immediately". The usbmon splits such cases already thanks to its timestamp, but it's not always available. I adjusted all drivers which I found affected (by searching for "urb"). Out of tree drivers may suffer a little bit, but I do not expect much breakage. At worst they may print a few messages. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 6月, 2006 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
Also fixes all drivers that set this field. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tilman Schmidt 提交于
The following patch to the Siemens Gigaset base driver adds graceful recovery for some frequently encountered error conditions, by retrying failed control requests (eg. stalled control pipe), and by closing and reopening the AT command channel when it appears to be stuck. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NHansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 4月, 2006 1 次提交
-
-
由 Tilman Schmidt 提交于
Fix a possible Oops in the Siemens Gigaset base driver when the device is unplugged while an ISDN connection is still active, and makes sure that the isdn4linux link level (LL) is properly informed if a connection is broken by the USB cable being unplugged. - Avoid unsafe checks of URB status fields outside the URB completion handlers, keep track of in-use URBs myself instead. - If an isochronous transfer URB completes with status==0, also check the status of the frame descriptors. - Verify length of interrupt messages received from the device. - Align the length limit on transmitted AT commands with the device documentation. - In case of AT response receive overrun, keep newly arrived instead of old unread data. - Remove redundant check of device ID in the USB probe function. - Correct and improve some comments and formatting. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Acked-by: NHansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 4月, 2006 4 次提交
-
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Replace some atomic_t variables in the Gigaset drivers by non-atomic ones, using spinlocks instead to assure atomicity, as proposed in discussions on the linux-kernel mailing list. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove four unnecessary forward function declarations and an obsolete E-mail address from the Siemens Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Eliminate the from_user argument from a debugging function, thus easing the job of sparse. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
With Hansjoerg Lipp <hjlipp@web.de> Remove the IFNULL debugging macros from the Gigaset drivers. Signed-off-by: NHansjoerg Lipp <hjlipp@web.de> Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-