* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Check s_dirt in fat_sync_fs()
  vfat: change the default from shortname=lower to shortname=mixed
  fat/nls: Fix handling of utf8 invalid char

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / yenta: Fix cardbus suspend/resume regression
  PM / PCMCIA: Drop second argument of pcmcia_socket_dev_suspend()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  sony-laptop: re-read the rfkill state when resuming from suspend
  sony-laptop: check for rfkill hard block at load time
  wext: add back wireless/ dir in sysfs for cfg80211 interfaces
  wext: Add bound checks for copy_from_user
  mac80211: improve/fix mlme messages
  cfg80211: always get BSS
  iwlwifi: fix 3945 ucode info retrieval after failure
  iwlwifi: fix memory leak in command queue handling
  iwlwifi: fix debugfs buffer handling
  cfg80211: don't set privacy w/o key
  cfg80211: wext: don't display BSSID unless associated
  net: Add explicit bound checks in net/socket.c
  bridge: Fix double-free in br_add_if.
  isdn: fix netjet/isdnhdlc build errors
  atm: dereference of he_dev->rbps_virt in he_init_group()
  ax25: Add missing dev_put in ax25_setsockopt
  Revert "sit: stateless autoconf for isatap"
  net: fix double skb free in dcbnl
  net: fix nlmsg len size for skb when error bit is set.
  net: fix vlan_get_size to include vlan_flags size
  ...

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (25 commits)
  drm/radeon/kms: Convert R520 to new init path and associated cleanup
  drm/radeon/kms: Convert RV515 to new init path and associated cleanup
  drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS
  drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ
  drm/r600: fix memory leak introduced with 64k malloc avoidance fix.
  drm/kms: make fb helper work for all drivers.
  drm/radeon/r600: fix offset handling in CS parser
  drm/radeon/kms/r600: fix forcing pci mode on agp cards
  drm/radeon/kms: fix for the extra pages copying.
  drm/radeon/kms/r600: add support for vline relocs
  drm/radeon/kms: fix some bugs in vline reloc
  drm/radeon/kms/r600: clamp vram to aperture size
  drm/kms: protect against fb helper not being created.
  drm/r600: get values from the passed in IB not the copy.
  drm: create gitignore file for radeon
  drm/radeon/kms: remove unneeded master create/destroy functions.
  drm/kms: start adding command line interface using fb.
  fb: change rules for global rules match.
  drm/radeon/kms: don't require up to 64k allocations. (v2)
  drm/radeon/kms: enable dac load detection by default.
  ...

Trivial conflicts in drivers/gpu/drm/radeon/radeon_asic.h due to adding
'->vga_set_state' function pointers.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: make allocation failures more verbose
  percpu: make pcpu_setup_first_chunk() failures more verbose
  percpu: make embedding first chunk allocator check vmalloc space size
  sparc64: implement page mapping percpu first chunk allocator
  percpu: make pcpu_build_alloc_info() clear static buffers
  percpu: fix unit_map[] verification in pcpu_setup_first_chunk()

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: Fix wrong condition check in while loop for mailbox and iommu2
  omap: rng: Use resource_size instead of manual calculation
  omap: Fix MMC gpio_wp for BeagleBoard C2 and above
  omap: Fix matrix_keymap_data usage
  omap: Fix a OMAP_MPUIO_VBASE typo for 850
  omap: Fix wrong jtag_id for 850
  omap: iovmm: Fix compiler warning
  omap: mailbox: Flush posted write when acking mailbox irq
  omap: mailbox: Execute softreset at startup
  omap: Add missing mux pin for EHCI phy reset line
  omap: Fix 44xx compile
  omap: Fix mcspi compile for 2420
  omap: Fix compile for arch/arm/mach-omap2

David Howells noticed (due to the compiler warning about an unused
'pty_ops_bsd' variable) that we haven't actually been using the code
that implements TIOCSPTLCK for legacy pty handling.  It's been that way
since 2.6.26, commit 3e8e88ca to be
exact ("pty: prepare for tty->ops changes").

DavidH initially submitted a patch just removing the dead code entirely,
and since nobody has apparently ever complained, I'm not entirely sure
that wouldn't be the right thing to do.  But since the whole and only
point of the legacy pty code is to be compatible with legacy distros
that don't use the new unix98 pty model, let's just wire it up again.

And clean it up a bit while we're at it.
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 22223c9b, as
requested by Andi Kleen:

  "Obviously kernels compiled with AMD support can still run on non AMD
   systems, so messages like this can never be removed at compile time."
Requsted-by: NAndi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert the r520 asic support to new init path, change are smaller than
previous one as most of the architecture is now in place and more code
sharing can happen btw various asics.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Convert the rv515 asic support to new init path also add an explanation
in radeon.h about the new init path. There is also few cleanups
associated with this change (others asic calling rv515 helper
functions).
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Compiling the radeon DRM driver with !CONFIG_DEBUG_FS
throws the following warnings:

drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_debugfs_init':
drivers/gpu/drm/radeon/radeon_ttm.c:714: warning: unused variable 'i'
drivers/gpu/drm/radeon/radeon_ttm.c: At top level:
drivers/gpu/drm/radeon/radeon_ttm.c:692: warning: 'radeon_mem_types_list' defined but not used
drivers/gpu/drm/radeon/radeon_ttm.c:693: warning: 'radeon_mem_types_names' defined but not used

Fix: move these variables inside the #if defined(CONFIG_DEBUG_FS)
block in radeon_ttm_debugsfs_init(), which is the only place using them.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Compiling DRM throws the following warning if MAGIC_SYSRQ is disabled:

drivers/gpu/drm/drm_fb_helper.c:101: warning: 'sysrq_drm_fb_helper_restore_op' defined but not used

Fix: place sysrq_drm_fb_helper_restore_op and associated
definitions inside #ifdef CONFIG_MAGIC_SYSRQ.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDave Airlie <airlied@linux.ie>

Warn and dump stack when percpu allocation fails.  percpu allocator is
still young and unchecked NULL percpu pointer usage can result in
random memory corruption when combined with the pointer shifting in
access macros.  Allocation failures should be rare and the warning
message will be disabled after certain times.
Signed-off-by: NTejun Heo <tj@kernel.org>

The parameters to pcpu_setup_first_chunk() come from different sources
depending on architecture and can be quite complex.  The function runs
various sanity checks on the parameters and triggers BUG() if
something isn't right.  However, this is very early during the boot
and not reporting exactly what the problem is makes debugging even
harder.

Add PCPU_SETUP_BUG() macro which prints out enough information about
the parameters.  As the macro still puts separate BUG() for each
check, it won't lose any information even on the situations where only
the program counter can be retrieved.

While at it, also bump pcpu_dump_alloc_info() message to KERN_INFO so
that it's visible on the console if boot fails to complete.
Signed-off-by: NTejun Heo <tj@kernel.org>

Embedding first chunk allocator maintains the distances between units
in the vmalloc area and thus needs vmalloc space to be larger than the
maximum distances between units; otherwise, it wouldn't be able to
create any dynamic chunks.  This patch makes the embedding first chunk
allocator check vmalloc space size and if the maximum distance between
units is larger than 75% of it, print warning and, if page mapping
allocator is available, fail initialization so that the system falls
back onto it.

This should work around percpu allocation failure problems on certain
sparc64 configurations where distances between NUMA nodes are larger
than the vmalloc area and makes percpu allocator more robust for
future configurations.
Signed-off-by: NTejun Heo <tj@kernel.org>

Implement page mapping percpu first chunk allocator as a fallback to
the embedding allocator.  The next patch will make the embedding
allocator check distances between units to determine whether it fits
within the vmalloc area so that this fallback can be used on such
cases.

sparc64 currently has relatively small vmalloc area which makes it
impossible to create any dynamic chunks on certain configurations
leading to percpu allocation failures.  This and the next patch should
allow those configurations to keep working until proper solution is
found.

While at it, mark pcpu_cpu_distance() with __init.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>

pcpu_build_alloc_info() may be called multiple times when percpu is
falling back to different first chunk allocator.  Make it clear static
buffers so that they don't contain values from previous runs.
Signed-off-by: NTejun Heo <tj@kernel.org>

pcpu_setup_first_chunk() incorrectly used NR_CPUS as the impossible
unit number while unit number can equal and go over NR_CPUS with
sparse unit map.  This triggers BUG_ON() spuriously on machines which
have non-power-of-two number of cpus.  Use UINT_MAX instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-tested-by: NTony Vroon <tony@linx.net>

Since 2.6.29 the PCI PM core have been restoring the standard
configuration registers of PCI devices in the early phase of
resume.  In particular, PCI devices without drivers have been handled
this way since commit 355a72d7
(PCI: Rework default handling of suspend and resume).  Unfortunately,
this leads to post-resume problems with CardBus devices which cannot
be accessed in the early phase of resume, because the sockets they
are on have not been woken up yet at that point.

To solve this problem, move the yenta socket resume to the early
phase of resume and, analogously, move the suspend of it to the late
phase of suspend.  Additionally, remove some unnecessary PCI code
from the yenta socket's resume routine.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13092, which is a
post-2.6.28 regression.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NFlorian <fs-kernelbugzilla@spline.de>
Cc: stable@kernel.org

pcmcia_socket_dev_suspend() doesn't use its second argument, so it
may be dropped safely.

This change is necessary for the subsequent yenta suspend/resume fix.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org

Without this, the hard-blocked state will be reported incorrectly if
the hardware switch is changed while the laptop is suspended.
Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: NNorbert Preining <preining@logic.at>
Acked-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

"I recently (on a flight) I found out that when I boot with the hard-switch
activated, so turning off all wireless activity on my laptop, the state
is not correctly announced in /dev/rfkill (reading it with rfkill command,
or my own gnome applet)...

After turning off and on again the hard-switch the events were right."

We can fix this by querying the firmware at load time and calling
rfkill_set_hw_state().
Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: NNorbert Preining <preining@logic.at>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NMattia Dongili <malattia@linux.it>
CC: stable@kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The move away from having drivers assign wireless handlers,
in favour of making cfg80211 assign them, broke the sysfs
registration (the wireless/ dir went missing) because the
handlers are now assigned only after registration, which is
too late.

Fix this by special-casing cfg80211-based devices, all
of which are required to have an ieee80211_ptr, in the
sysfs code, and also using get_wireless_stats() to have
the same values reported as in procfs.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Reported-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Tested-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The wireless extensions have a copy_from_user to a local stack
array "essid", but both me and gcc have failed to find where
the bounds for this copy are located in the code.

This patch adds some basic sanity checks for the copy length
to make sure that we don't overflow the stack buffer.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

It's useful to know the MAC address when being
disassociated; fix a typo (missing colon) and
move some messages so we get them only when they
are actually taking effect.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Multiple problems were reported due to interaction
between wpa_supplicant and the wext compat code in
cfg80211, which appear to be due to it not getting
any bss pointer here when wpa_supplicant sets all
parameters -- do that now. We should still get the
bss after doing an extra scan, but that appears to
increase the time we need for connecting enough to
sometimes cause timeouts.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Tested-by: Hin-Tak Leung <hintak.leung@gmail.com>,
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When hardware or uCode problem occurs driver captures significant
information from device to enable debugging. The format of this information
is different between 3945 and 4965 and later devices, yet currently the
3945 uses the 4965 and later format. Fix this by adding a new library call
that is initialized to the correct formatting routine based on device.

This moves the iwlagn event and error log handling back to iwl-agn.c to
make it part of iwlagn module.

Also remove the 3945 sysfs file that triggers dump of event log - there is
already a debugfs file that can do it for all drivers.
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Also free the array of command pointers and meta data of each
command buffer when command queue is freed.
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We keep track of where to write into a buffer by keeping a count of how
much has been written so far. When writing to the buffer we thus take the
buffer pointer and adding the count of what has been written so far.
Keeping track of what has been written so far is done by incrementing
this number every time something is written to the buffer with how much has
been written at that time.

Currently this number is incremented incorrectly when using the
"hex_dump_to_buffer" call to add data to the buffer. Fix this by only
adding what has been added to the buffer in that call instead of what has
been added since beginning of buffer.

Issue was discovered and discussed during testing of
https://bugzilla.redhat.com/show_bug.cgi?id=464598 .

When a user views any of these files they will see something like:

[  179.355202] ------------[ cut here ]------------
[  179.355209] WARNING: at ../lib/vsprintf.c:989 vsnprintf+0x5ec/0x5f0()
[  179.355212] Hardware name: VGN-Z540N
[  179.355213] Modules linked in: i915 drm i2c_algo_bit i2c_core ipv6 acpi_cpufreq cpufreq_userspace cpufreq_powersave cpufreq_ondemand cpufreq_conservative cpufreq_stats freq_table container sbs sbshc arc4 ecb iwlagn iwlcore joydev led_class mac80211 af_packet pcmcia psmouse sony_laptop cfg80211 iTCO_wdt iTCO_vendor_support pcspkr serio_raw rfkill intel_agp video output tpm_infineon tpm tpm_bios button battery yenta_socket rsrc_nonstatic pcmcia_core processor ac evdev ext3 jbd mbcache sr_mod sg cdrom sd_mod ahci libata scsi_mod ehci_hcd uhci_hcd usbcore thermal fan thermal_sys
[  179.355262] Pid: 5449, comm: cat Not tainted 2.6.31-wl-54419-ge881071 #62
[  179.355264] Call Trace:
[  179.355267]  [<ffffffff811ad14c>] ? vsnprintf+0x5ec/0x5f0
[  179.355271]  [<ffffffff81041348>] warn_slowpath_common+0x78/0xd0
[  179.355275]  [<ffffffff810413af>] warn_slowpath_null+0xf/0x20
[  179.355277]  [<ffffffff811ad14c>] vsnprintf+0x5ec/0x5f0
[  179.355280]  [<ffffffff811ad23d>] ? scnprintf+0x5d/0x80
[  179.355283]  [<ffffffff811ad23d>] scnprintf+0x5d/0x80
[  179.355286]  [<ffffffff811aed29>] ? hex_dump_to_buffer+0x189/0x340
[  179.355290]  [<ffffffff810e91d7>] ? __kmalloc+0x207/0x260
[  179.355303]  [<ffffffffa02a02f8>] iwl_dbgfs_nvm_read+0xe8/0x220 [iwlcore]
[  179.355306]  [<ffffffff811a9b62>] ? __up_read+0x92/0xb0
[  179.355310]  [<ffffffff810f0988>] vfs_read+0xc8/0x1a0
[  179.355313]  [<ffffffff810f0b50>] sys_read+0x50/0x90
[  179.355316]  [<ffffffff8100bd6b>] system_call_fastpath+0x16/0x1b
[  179.355319] ---[ end trace 2383d0d5e0752ca0 ]---
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When wpa_supplicant is used to connect to open networks,
it causes the wdev->wext.keys to point to key memory, but
that key memory is all empty. Only use privacy when there
is a default key to be used.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Tested-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: NKalle Valo <kalle.valo@iki.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently, cfg80211's SIOCGIWAP implementation returns
the BSSID that the user set, even if the connection has
since been dropped due to other changes. It only should
return the current BSSID when actually connected.

Also do a small code cleanup.
Reported-by: NThomas H. Guenther <thomas.h.guenther@intel.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Tested-by: NThomas H. Guenther <thomas.h.guenther@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The sys_socketcall() function has a very clever system for the copy
size of its arguments. Unfortunately, gcc cannot deal with this in
terms of proving that the copy_from_user() is then always in bounds.
This is the last (well 9th of this series, but last in the kernel) such
case around.

With this patch, we can turn on code to make having the boundary provably
right for the whole kernel, and detect introduction of new security
accidents of this type early on.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a potential double-kfree in net/bridge/br_if.c.  If br_fdb_insert
fails, then the kobject is put back (which calls kfree due to the kobject
release), and then kfree is called again on the net_bridge_port.  This
patch fixes the crash.

Thanks to Stephen Hemminger for the one-line fix.
Signed-off-by: NJeff Hansen <x@jeffhansen.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit cb3824ba didn't fix this problem.

Fix build errors in netjet, using isdnhdlc module:

drivers/built-in.o: In function `mode_tiger':
netjet.c:(.text+0x1ca0c7): undefined reference to `isdnhdlc_rcv_init'
netjet.c:(.text+0x1ca0d4): undefined reference to `isdnhdlc_out_init'
drivers/built-in.o: In function `fill_dma':
netjet.c:(.text+0x1ca2bd): undefined reference to `isdnhdlc_encode'
drivers/built-in.o: In function `read_dma':
netjet.c:(.text+0x1ca614): undefined reference to `isdnhdlc_decode'
drivers/built-in.o: In function `nj_irq':
netjet.c:(.text+0x1cb07a): undefined reference to `isdnhdlc_encode'

drivers/built-in.o: In function `isdnhdlc_decode':
(.text+0x1c2088): undefined reference to `crc_ccitt_table'
drivers/built-in.o: In function `isdnhdlc_encode':
(.text+0x1c2339): undefined reference to `crc_ccitt_table'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The prefix decrement causes a very long loop if pci_pool_alloc() failed
in the first iteration. Also I swapped rbps and rbpl arguments.
Reported-by: NJuha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ax25_setsockopt SO_BINDTODEVICE is missing a dev_put call in case of
success.  Re-order code to fix this bug.  While at it also reformat two
lines of code to comply with the Linux coding style.

Initial patch by Jarek Poplawski <jarkao2@gmail.com>.
Reported-by: NBernard Pidoux F6BVP <f6bvp@free.fr>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's worked fine so far since reset is done for the first time.
Reported-by: NJuha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: NJuha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The legacy r600 path shares code, but doesn't share quite enough
to get the freeing correct. Free the pages here also.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This initialises the fb helper with the connector helper,
so that the fb cmdline code works for intel as well.
Signed-off-by: NDave Airlie <airlied@redhat.com>