The async seeding operation is triggered during initalization right
after the first non-blocking seeding is completed. As required by the
asynchronous operation of random.c, a callback function is provided that
is triggered by random.c once entropy is available. That callback
function performs the actual seeding of the DRBG.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to prepare for the addition of the asynchronous seeding call,
the invocation of seeding the DRBG is moved out into a helper function.

In addition, a block of memory is allocated during initialization time
that will be used as a scratchpad for obtaining entropy. That scratchpad
is used for the initial seeding operation as well as by the
asynchronous seeding call. The memory must be zeroized every time the
DRBG seeding call succeeds to avoid entropy data lingering in memory.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The added API calls provide a synchronous function call
get_blocking_random_bytes where the caller is blocked until
the nonblocking_pool is initialized.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If more than one application invokes getrandom(2) before the pool
is ready, then all bar one will be stuck forever because we use
wake_up_interruptible which wakes up a single task.

This patch replaces it with wake_up_all.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch removes the cryptoff parameter now that all users
set it to zero.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The cryptoff parameter was added to facilitate the skipping of
IVs that sit between the AD and the plain/cipher text.  However,
it was never implemented correctly as and we do not handle users
such as IPsec setting cryptoff.  It is simply ignored.

Implementing correctly is in fact more trouble than what it's
worth.

This patch removes the uses of cryptoff by moving the AD forward
to fill the gap left by the IV.  The AD is moved back after the
underlying AEAD processing is finished.

This is in fact beter than the cryptoff solution because it allows
algorithms that use seqniv (i.e., GCM and CCM) to hash the whole
packet as a single piece, while cryptoff meant that there was
guaranteed to be a gap.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The cryptoff parameter was added to facilitate the skipping of
IVs that sit between the AD and the plain/cipher text.  However,
it was never implemented correctly as and we do not handle users
such as IPsec setting cryptoff.  It is simply ignored.

Implementing correctly is in fact more trouble than what it's
worth.

This patch removes the uses of cryptoff and simply falls back
to using the old AEAD interface as it's only needed for old AEAD
implementations.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The function aead_geniv_alloc currently sets cra_type even for
new style instances.  This is unnecessary and may hide bugs such
as when our caller uses crypto_register_instance instead of the
correct aead_register_instance.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

New style AEAD instances must use aead_register_instance.  This
worked by chance because aead_geniv_alloc is still setting things
the old way.

This patch converts the template over to the create model where
we are responsible for instance registration so that we can call
the correct function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

New style AEAD instances must use aead_register_instance.  This
worked by chance because aead_geniv_alloc is still setting things
the old way.

This patch converts the template over to the create model where
we are responsible for instance registration so that we can call
the correct function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Newer templates use tmpl->create and have a NULL tmpl->alloc.  So
we must use tmpl->create if it is set.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Newer templates use tmpl->create and have a NULL tmpl->alloc.  So
we must use tmpl->create if it is set.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The mv_cesa driver does not request the CESA registers memory region.
Since we're about to add a new CESA driver, we need to make sure only one
of these drivers probe the CESA device, and requesting the registers memory
region is a good way to achieve that.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The variable tfm_count is accessed by multiple threads without
locking.  This patch converts it to an atomic_t.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

AEAD algorithm implementors need to figure out a given algorithm's
IV size and maximum authentication size.  During the transition
this is difficult to do as an algorithm could be new style or old
style.

This patch creates two helpers to make this easier.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NHarald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a new AEAD IV generator echainiv.  It is intended
to replace the existing skcipher IV generator eseqiv.

If the underlying AEAD algorithm is using the old AEAD interface,
then echainiv will simply use its IV generator.

Otherwise, echainiv will encrypt a counter just like eseqiv but
it'll first xor it against a previously stored IV similar to
chainiv.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a new IV generator seqniv which is identical to
seqiv except that it skips the IV when authenticating.  This is
intended to be used by algorithms such as rfc4106 that does the
IV authentication implicitly.

Note that the code used for seqniv is in fact identical to the
compatibility case for seqiv.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the seqiv IV generator to work with the new
AEAD interface where IV generators are just normal AEAD algorithms.

Full backwards compatibility is paramount at this point since
no users have yet switched over to the new interface.  Nor can
they switch to the new interface until IV generation is fully
supported by it.

So this means we are adding two versions of seqiv alongside the
existing one.  The first one is the one that will be used when
the underlying AEAD algorithm has switched over to the new AEAD
interface.  The second one handles the current case where the
underlying AEAD algorithm still uses the old interface.

Both versions export themselves through the new AEAD interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a check for in scatterwalk_map_and_copy to avoid
copying from the same address to the same address.  This is going
to be used for IV copying in AEAD IV generators.

There is no provision for partial overlaps.

This patch also uses the new scatterwalk_ffwd instead of doing
it by hand in scatterwalk_map_and_copy.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes gcm use the default null skcipher instead of
allocating a new one for each tfm.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a default null skcipher for users such as gcm
to perform copies on SG lists.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the basic structure of the new AEAD type.  Unlike
the current version, there is no longer any concept of geniv.  IV
generation will still be carried out by wrappers but they will be
normal AEAD algorithms that simply take the IPsec sequence number
as the IV.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The crypto layer already checks maxauthsize when setauthsize is
called.  So there is no need to check it again within setauthsize.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch uses the helper crypto_aead_maxauthsize instead of
directly dereferencing aead_alg.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the helper crypto_aead_maxauthsize to remove the
need to directly dereference aead_alg internals by AEAD implementors.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch replaces references to aead_alg with old_aead_alg.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch is the first step in the introduction of a new AEAD
alg type.  Unlike normal conversions this patch only renames the
existing aead_alg structure because there are external references
to it.

Those references will be removed after this patch.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The primary user of AEAD, IPsec includes the IV in the AD in
most cases, except where it is implicitly authenticated by the
underlying algorithm.

The way it is currently implemented is a hack because we pass
the data in piecemeal and the underlying algorithms try to stitch
them back up into one piece.

This is why this patch is adding a new interface that allows a
single SG list to be passed in that contains everything so the
algorithm implementors do not have to stitch.

The new interface accepts a single source SG list and a single
destination SG list.  Both must be laid out as follows:

	AD, skipped data, plain/cipher text, ICV

The ICV is not present from the source during encryption and from
the destination during decryption.

For the top-level IPsec AEAD algorithm the plain/cipher text will
contain the generated (or received) IV.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the scatterwalk_ffwd helper which can create an
SG list that starts in the middle of an existing SG list.  The
new list may either be part of the existing list or be a chain
that latches onto part of the existing list.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type.  Otherwise it leads to a crash when the spawn is
used.

This patch fixes it by switching over to crypto_grab_aead instead.

Fixes: 5d1d65f8 ("crypto: aead - Convert top level interface to new style")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type.  Otherwise it leads to a crash when the spawn is
used.

This patch fixes it by switching over to crypto_grab_aead instead.

Fixes: 5d1d65f8 ("crypto: aead - Convert top level interface to new style")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Due to the recent update of the kernel crypto API header files,
locations of function definitions and their documentation have changed.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

omap3 support is same as omap2, just with different IO address (specified in DT)
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since MD5 IV are now available in crypto/md5.h, use them.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>