- 30 3月, 2010 10 次提交
-
-
由 Sreenivasa Honnur 提交于
- Fixed "ethtool -d" prints - reg_space pointer was getting over written, updating it correctly. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Align the memory only if it is misaligned. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Fix starvation of receive ring controller when blasted by short packets. This was because the driver was posting 64 rxds initially while the ring controller was expecting to read 256 replenished rxds. While the driver was coming up, the internal rxd memory filled up the 64 buffers provided and the ring controller was left waiting for the remaining 192 rxds to complete the write back of completed rxds to the host and generation of an interrupt. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sreenivasa Honnur 提交于
- Fix a receive stall due to driver being out of synch with chip. In a corner case scenario the adapter's ring controller may return a RxD with transfer code of 0xC, while the host ownership bit is still set to the adapter. The driver needs to assume that this case where (host_ownership == 1 or adapter) and (transfer_code == 0xC) is valid, that is, this RxD has been returned by the receive ring controller but no frame data is associated with the rxd. - Restore the transfer code field of each newly replenished RxD to 0x0. - Code cleanup. Removed usage of magic numbers. Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> For NX2031, msix is supported from fw version > 3.4.336. This fw version check should take flash fw in consider instead of running fw or fw from file. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Rarely: Fw file size can be unaligned to 8. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh K Borundia 提交于
Signed-off-by: NRajesh K Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Validate all sections of unified romimage, before accessing them, to avoid seg fault. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> o DEV_NEED_RESET state was not handled during fw intialization phase. o nx_decr_dev_ref_cnt() can return error, if fail to grab pcie seamphore. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account to show tx csum status, which driver doesn't set while disabling tx csum. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2010 2 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 3月, 2010 3 次提交
-
-
由 David S. Miller 提交于
Unlike the ipv4 side, these are completely unused. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
When more data is stuffed into an nlmsg than initially projected, an extra allocation needs to be done. Reserve enough for IFLA_STATS64 so that this does not to needlessy happen. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Tony Luck observes that the original IFLA_STATS64 submission causes unaligned accesses. This is because nla_data() returns a pointer to a memory region that is only aligned to 32 bits. Do some memcpying to workaround this. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2010 4 次提交
-
-
由 Bruce Allan 提交于
As an alternative to a quite large patch previously submitted by Joe Perches to make use of kernel logging API, this patch is much less intrusive. Convert e_<level> to netdev_<level> Use #define pr_fmt Convert a few printks to pr_<level> Cc: Joe Perches <joe@perches.com> Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Goff 提交于
This was included in OpenVZ kernels but wasn't integrated upstream. >From git://git.openvz.org/pub/linux-2.6.24-openvz: commit 5c69402f18adf7276352e051ece2cf31feefab02 Author: Alexey Dobriyan <adobriyan@openvz.org> Date: Mon Dec 24 14:37:45 2007 +0300 netlink: fixup ->tgid to work in multiple PID namespaces Signed-off-by: NTom Goff <thomas.goff@boeing.com> Acked-by: NAlexey Dobriyan <adobriyan@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2010 3 次提交
-
-
由 David S. Miller 提交于
Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Use list_add_tail() to get the behavior we had before the list_head conversion for ipv6 address lists. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RPS currently depends on SMP and SYSFS Adding a CONFIG_RPS makes sense in case this requirement changes in the future. This patch saves about 1500 bytes of kernel text in case SMP is on but SYSFS is off. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2010 18 次提交
-
-
由 John W. Linville 提交于
drivers/net/wireless/iwlwifi/iwl-rx.c: In function 'iwl_good_ack_health': drivers/net/wireless/iwlwifi/iwl-rx.c:647: error: 'struct iwl_priv' has no member named '_agn' Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Includes one minor indentation fix to placate checkpatch. Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Trailing spaces in files in /proc for lanstreamer.c and olympic.c have been left as they are. Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Includes a few whitespace fixes to placate checkpatch. Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
ps3_gelic_wireless.c: also remove a stray "p" after a newline. Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Includes a minor consistency improvement between two related debug messages. Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We never use "sk" so this patch removes it. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We never actually use "dev" so I removed it. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We don't need "dev" any more after: a5a04819 [LLC]: station source mac address Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We don't need "sdata" any more after: d84f3234 mac80211: remove dev_hold/put calls Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
In nl80211.h, be a little more elaborate in the docs for the definitions NL80211_ATTR_CQM_RSSI_THOLD and NL80211_ATTR_CQM_RSSI_HYST. Reported-by: NLuis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add support for the set_cqm_config op. This op function configures the requested connection quality monitor rssi threshold and rssi hysteresis values to the hardware if the hardware supports IEEE80211_HW_SUPPORTS_CQM. For unsupported hardware, currently -EOPNOTSUPP is returned, so the mac80211 is currently not doing connection quality monitoring on the host. This could be added later, if needed. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add support for basic configuration of a connection quality monitoring to the nl80211 interface, and basic support for notifying about triggered monitoring events. Via this interface a user-space connection manager may configure and receive pre-warning events of deteriorating WLAN connection quality, and start preparing for roaming in advance, before the connection is already lost. An example usage of such a trigger is starting scanning for nearby AP's in an attempt to find one with better connection quality, and associate to it before the connection characteristics of the existing connection become too bad or the association is even lost, leading in a prolonged delay in connectivity. The interface currently supports only RSSI, but it could be later extended to include other parameters, such as signal-to-noise ratio, if need for that arises. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Auto auth mode is enabled by default. If user doesn't specify the auth mode, while association driver will first try with open mode and then with shared key mode. If user specifies an auth mode, auto auth is disabled and driver will not try association with another auth mode. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-