debug_level 1 (warn): Include warning messages.
debug_level 2 (info): Include relevant info for control plane.
debug_level 3 (debug): Include relevant info in the IO path.

Also, added/removed some logging messages.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Personal preference, easier control of the log level with
a single modparam which can be changed dynamically. Allows
better saparation of control and IO plains.

Replaced throughout ib_isert.c:
s/pr_debug/isert_dbg/g
s/pr_info/isert_info/g
s/pr_warn/isert_warn/g
s/pr_err/isert_err/g

Plus nit checkpatch warning change.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We don't want to wait for conn_logout_comp from isert_comp_wq
context as this blocks further completions from being processed.
Instead we wait for it conditionally (if logout response was
actually posted) in wait_conn. This wait should normally happen
immediately as it occurs after we consumed all the completions
(including flush errors) and conn_logout_comp should have been
completed.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Might result in a deadlock where completion context waits for
session commands release where the later might need a final
completion for it.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In order to reduce the contention on CQ locking (present
in some LLDDs) we poll in batches of 16 work completion items.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case the CQ is packed with completions, we can't just
hog the CPU forever. Poll until a sufficient budget (currently
hard-coded to 64k completions) and if budget is exhausted, bailout
and give a chance to other threads.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In order to know that we consumed all the connection completions
we maintain atomic post_send_buf_count for each IO post send. But
we can know that if we post a "beacon" (zero length RECV work request)
after we move the QP into error state and the target does not serve
any new IO. When we consume it, we know we finished all the connection
completion and we can go ahead and destroy stuff.

In error completion handler we now just need to check for ISERT_BEACON_WRID
to arrive and then wait for session commands to cleanup and complete
conn_wait_comp_err.

We reserve another CQ and QP entries to fit the zero length post recv.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We are calling session reinstatement, wait_conn will start
connection termination.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Using TX and RX CQs attached to the same vector might
create a throttling effect coming from the serial processing
of a work-queue. Use one CQ instead, it will do better in interrupt
processing and it provides a simpler code. Also, We get rid of
redundant isert_rx_wq.

Next we can remove the atomic post_send_buf_count from the IO path.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

A pre-step before going to a single CQ.
Also this makes the code a little more simple to
read.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Nit, uintptr_t is designed for pointer casting, use it.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

As a pre-step to a single CQ, we unite the error completion
handlers to a single handler.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It is disabled at the moment, we will get that back
in once the target is more stable.

This reverts commit 95b60f07
"Add support for completion interrupt coalescing"
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Currently we have no way to tell that the target stack is in shutdown
sequence. In case we have open connections, the initiator immediately
attempts to reconnect in a DDOS attack style, so we may end up
terminating the iser enabled network portal while it's np_accept_list
still have pending connections.

The workaround is simply release all the connections in the list.
A proper fix will be to start shutdown sequence by shutting the
network portal to avoid initiator immediate reconnect attempts.

But the temporary work around seems to work at this point, so I think
we can do this for now...
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

iSER will report supported protection operations based on
the tpg attribute t10_pi settings and HCA PI offload capabilities.
If the HCA does not support PI offload or tpg attribute t10_pi is
not set, we fall to SW PI mode.

In order to do that, we move iscsit_get_sup_prot_ops after connection
tpg assignment.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fallback to software mode DIF if HCA does not support
PI (without crashing obviously). It is still possible to
run with backend protection and an unprotected frontend,
so looking at the command prot_op is not enough. Check
device PI capability on a per-IO basis (isert_prot_cmd
inline static) to determine if we need to handle protection
information.

Trace:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffffa037f8b1>] isert_reg_sig_mr+0x351/0x3b0 [ib_isert]
Call Trace:
 [<ffffffff812b003a>] ? swiotlb_map_sg_attrs+0x7a/0x130
 [<ffffffffa038184d>] isert_reg_rdma+0x2fd/0x370 [ib_isert]
 [<ffffffff8108f2ec>] ? idle_balance+0x6c/0x2c0
 [<ffffffffa0382b68>] isert_put_datain+0x68/0x210 [ib_isert]
 [<ffffffffa02acf5b>] lio_queue_data_in+0x2b/0x30 [iscsi_target_mod]
 [<ffffffffa02306eb>] target_complete_ok_work+0x21b/0x310 [target_core_mod]
 [<ffffffff8106ece2>] process_one_work+0x182/0x3b0
 [<ffffffff8106fda0>] worker_thread+0x120/0x3c0
 [<ffffffff8106fc80>] ? maybe_create_worker+0x190/0x190
 [<ffffffff8107594e>] kthread+0xce/0xf0
 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8159a22c>] ret_from_fork+0x7c/0xb0
 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts to allocate PI contexts dynamically in order
avoid a potentially bogus np->tpg_np and associated NULL pointer
dereference in isert_connect_request() during iser-target endpoint
shutdown with multiple network portals.

Also, there is really no need to allocate these at connection
establishment since it is not guaranteed that all the IOs on
that connection will be to a PI formatted device.

We can do it in a lazy fashion so the initial burst will have a
transient slow down, but very fast all IOs will allocate a PI
context.

Squashed:

iser-target: Centralize PI context handling code
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In situations such as bond failover, The new session establishment
implicitly invokes the termination of the old connection.

So, we don't want to wait for the old connection wait_conn to completely
terminate before we accept the new connection and post a login response.

The solution is to deffer the comp_wait completion and the conn_put to
a work so wait_conn will effectively be non-blocking (flush errors are
assumed to come very fast).

We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE
to spread the concurrency of release works.
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The np listener cm_id will also get ADDR_CHANGE event
upcall (in case it is bound to a specific IP). Handle
it correctly by creating a new cm_id and implicitly
destroy the old one.

Since this is the second event a listener np cm_id may
encounter, we move the np cm_id event handling to a
routine.

Squashed:

iser-target: Move cma_id setup to a function
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Take isert_conn pointer from cm_id->qp->qp_context. This
will allow us to know that the cm_id context is always
the network portal. This will make the cm_id event check
(connection or network portal) more reliable.

In order to avoid a NULL dereference in cma_id->qp->qp_context
we destroy the qp after we destroy the cm_id (and make the
dereference safe). session stablishment/teardown sequences
can happen in parallel, we should take into account that
connected_handler might race with connection teardown flow.

Also, protect isert_conn->conn_device->active_qps decrement
within the error patch during QP creation failure and the
normal teardown path in isert_connect_release().

Squashed:

iser-target: Decrement completion context active_qps in error flow
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There is no point in accepting a new CM request only
when we are completely done with the last iscsi login.
Instead we accept immediately, this will also cause the
CM connection to reach connected state and the initiator
is allowed to send the first login. We mark that we got
the initial login and let iscsi layer pick it up when it
gets there.

This reduces the parallel login sequence by a factor of
more then 4 (and more for multi-login) and also prevents
the initiator (who does all logins in parallel) from
giving up on login timeout expiration.

In order to support multiple login requests sequence (CHAP)
we call isert_rx_login_req from isert_rx_completion insead
of letting isert_get_login_rx call it.

Squashed:

iser-target: Use kref_get_unless_zero in connected_handler
iser-target: Acquire conn_mutex when changing connection state
iser-target: Reject connect request in failure path
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

ISER_CONN_UP state is not sufficient to know if
we should wait for completion of flush errors and
disconnected_handler event.

Instead, split it to 2 states:
- ISER_CONN_UP: Got to CM connected phase, This state
indicates that we need to wait for a CM disconnect
event before going to teardown.

- ISER_CONN_FULL_FEATURE: Got to full feature phase
after we posted login response, This state indicates
that we posted recv buffers and we need to wait for
flush completions before going to teardown.

Also avoid deffering disconnected handler to a work,
and handle it within disconnected handler.
More work here is needed to handle DEVICE_REMOVAL event
correctly (cleanup all resources).

Squashed:

iser-target: Don't deffer disconnected handler to a work
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Since commit 0fc4ea70 ("Target/iser: Don't put isert_conn inside
disconnected handler") we put the conn kref in isert_wait_conn, so we
need .wait_conn to be invoked also in the error path.

Introduce call to isert_conn_terminate (called under lock)
which transitions the connection state to TERMINATING and calls
rdma_disconnect. If the state is already teminating, just bail
out back (temination started).

Also, make sure to destroy the connection when getting a connect
error event if didn't get to connected (state UP). Same for the
handling of REJECTED and UNREACHABLE cma events.

Squashed:

iscsi-target: Add call to wait_conn in establishment error flow
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

isert has an issue of trying to create a CQ with more CQEs than are
supported by the hardware, that currently results in failures during
isert_device creation during first session login.

This is the isert version of the patch that Minh Tran submitted for
iser, and is simple a workaround required to function with existing
ocrdma hardware.
Signed-off-by: NChris Moore <chris.moore@emulex.com>
Reviewied-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In this case the cm_id->context is the isert_np, and the cm_id->qp
is NULL, so use that to distinct the cases.

Since we don't expect any other events on this cm_id we can
just return -1 for explicit termination of the cm_id by the
cma layer.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a max_send_sge=2 minimum in isert_conn_setup_qp()
to ensure outgoing control PDU responses with tx_desc->num_sge=2
are able to function correctly.

This addresses a bug with RDMA hardware using dev_attr.max_sge=3,
that in the original code with the ConnectX-2 work-around would
result in isert_conn->max_sge=1 being negotiated.

Originally reported by Chris with ocrdma driver.
Reported-by: NChris Moore <Chris.Moore@emulex.com>
Tested-by: NChris Moore <Chris.Moore@emulex.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Expose more signature setting parameters. We modify the signature API
to allow usage of some new execution parameters relevant to data
integrity feature.

This patch modifies ib_sig_domain structure by:

- Deprecate DIF type in signature API (operation will
  be determined by the parameters alone, no DIF type awareness)
- Add APPTAG check bitmask (for input domain)
- Add REFTAG remap (increment) flag for each domain
- Add APPTAG/REFTAG escape options for each domain

The mlx5 driver is modified to follow the new parameters in HW
signature setup.

At the moment the callers (iser/isert) hard-code new parameters (by
DIF type). In the future, callers will retrieve them from the scsi
command structure.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Later there will be more parameters to set, so we want to do it in a
centralized place.

This patch does not change any functionality.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch explicitly disables TX completion interrupt coalescing logic
in isert_put_response() and isert_put_datain() that was originally added
as an efficiency optimization in commit 95b60f07.

It has been reported that this change can trigger ABORT_TASK timeouts
under certain small block workloads, where disabling coalescing was
required for stability.  According to Sagi, this doesn't impact
overall performance, so go ahead and disable it for now.
Reported-by: NMoussa Ba <moussaba@micron.com>
Reported-by: NSagi Grimberg <sagig@dev.mellanox.co.il>
Cc: <stable@vger.kernel.org> # 3.13+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Unused return value from down_interruptible
Reported-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The iser target is the RDMA requester and the iser initiator is the
RDMA responder. In order to determine the max inflight RDMA READ requests
to set on the QP (initiator_depth), it should take the min between the
initiator published initiator_depth and the max inflight rdma read
requests its local HCA support (max_qp_init_rd_atom).

The target will never handle incoming RDMA READ requests so no need to
set responder_resources.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

rdma_disconnect may be called in 2 code flows:
- isert_wait_conn: disconnect initiated be the target
- disconnected_handler: disconnect invoked by the initiator

In case isert_conn->disconnect is true then rdma_disconnect
was called in disconnected handler, no need to call it again
from isert_wait_conn.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

disconnected_handler is invoked on several CM events (such
as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since
multiple  events can occur while before isert_free_conn is
invoked, we might put all isert_conn references and free
the connection too early.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case the connection didn't reach connected state, disconnected
handler will never be invoked thus the second kref_put on
isert_conn will be missing.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case the transport is iser we should not include the
iscsi target info in the sendtargets text response pdu.
This causes sendtargets response to include the target
info twice.

Modify iscsit_build_sendtargets_response to filter
transport types that don't match.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case the discovery session is carried over iser, we can't
access the assumed network portal since the default portal is
used. In this case we don't really need to allocate the fastreg
pool, just prepare to the text pdu that will follow.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reported-by: NAlex Tabachnik <alext@mellanox.com>
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch addresses a bug where an early exception for SCSI WRITE
with ImmediateData=Yes was missing the target_put_sess_cmd() call
to drop the extra se_cmd->cmd_kref reference obtained during the
normal iscsit_setup_scsi_cmd() codepath execution.

This bug was manifesting itself during session shutdown within
isert_cq_rx_comp_err() where target_wait_for_sess_cmds() would
end up waiting indefinately for the last se_cmd->cmd_kref put to
occur for the failed SCSI WRITE + ImmediateData descriptors.

This fix follows what traditional iscsi-target code already does
for the same failure case within iscsit_get_immediate_data().
Reported-by: NSagi Grimberg <sagig@dev.mellanox.co.il>
Cc: Sagi Grimberg <sagig@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case user chose to set T10-PI enable on the target while
the IB device does not support it, gracefully reject the request.
Reported-by: NSlava Shwartsman <valyushash@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

disconnected_handler works are scheduled on system_wq.
When attempting to unload, first make sure all works
have cleaned up.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There are 4 RDMA_CM events that all basically mean that
the user should teardown the IB connection:
- DISCONNECTED
- ADDR_CHANGE
- DEVICE_REMOVAL
- TIMEWAIT_EXIT

Only in DISCONNECTED/ADDR_CHANGE it makes sense to
call rdma_disconnect (send DREQ/DREP to our initiator).
So we keep the same teardown handler for all of them
but only indicate calling rdma_disconnect for the relevant
events.

This patch also removes redundant debug prints for each single
event.

v2 changes:
 - Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag)
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>