Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 31 8月, 2015 1 次提交
  3. 29 8月, 2015 1 次提交
  5. 13 6月, 2015 4 次提交
    • I
      IB/mad: Add final OPA MAD processing · 8e4349d1
      由 Ira Weiny 提交于 
      For devices which support OPA MADs

   1) Use previously defined SMP support functions.

   2) Pass correct base version to ib_create_send_mad when processing OPA MADs.

   3) Process out_mad_key_index returned by agents for a response.  This is
      necessary because OPA SMP packets must carry a valid pkey.

   4) Carry the correct segment size (OPA vs IBTA) of RMPP messages within
      ib_mad_recv_wc.

   5) Handle variable length OPA MADs by:

        * Adjusting the 'fake' WC for locally routed SMP's to represent the
          proper incoming byte_len
        * out_mad_size is used from the local HCA agents
                1) when sending agent responses on the wire
                2) when passing responses through the local_completions
		   function

	NOTE: wc.byte_len includes the GRH length and therefore is different
	      from the in_mad_size specified to the local HCA agents.
	      out_mad_size should _not_ include the GRH length as it is added
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
      8e4349d1
    • I
      IB/mad: Add partial Intel OPA MAD support · 548ead17
      由 Ira Weiny 提交于 
      This patch is the first of 3 which adds processing of OPA MADs

1) Add Intel Omni-Path Architecture defines
2) Increase max management version to accommodate OPA
3) update ib_create_send_mad
	If the device supports OPA MADs and the MAD being sent is the OPA base
	version alter the MAD size and sg lengths as appropriate
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
      548ead17
    • I
      IB/core: Add ability for drivers to report an alternate MAD size. · 337877a4
      由 Ira Weiny 提交于 
      Add max MAD size to the device immutable data set and have all drivers that
support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core.

Verify MAD size data in both the MAD core and when reading the immutable data.

OPA drivers will report alternate MAD sizes in subsequent patches.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
      337877a4
    • I
      IB/mad: Support alternate Base Versions when creating MADs · da2dfaa3
      由 Ira Weiny 提交于 
      In preparation to support the new OPA MAD Base version, add a base version
parameter to ib_create_send_mad and set it to IB_MGMT_BASE_VERSION for current
users.

Definition of the new base version and it's processing will occur in later
patches.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
      da2dfaa3
  7. 21 5月, 2015 2 次提交
  9. 11 8月, 2014 2 次提交
  11. 19 5月, 2012 1 次提交
  13. 26 2月, 2012 1 次提交
  15. 28 2月, 2009 1 次提交
    • R
      IB/mad: Fix RMPP header RRespTime manipulation · 7020cb0f
      由 Ramachandra K 提交于 
      Fix ib_set_rmpp_flags() to use the correct bit mask for RRespTime.  In
the 8-bit field of the RMPP header, the first 5 bits are RRespTime and
next 3 bits are RMPPFlags. Hence to retain the first 5 bits, the mask
should be 0xF8 instead of 0xF1.

ack_recv()-->format_ack() calls ib_set_rmpp_flags() and due to the
incorrect ANDing with 0xF1, RRespTime got changed incorrectly and RMPP
Acks sent back always had a RRespTime of 0x1E (30) which caused the
other end to consider the time outs to be approximately 4297 seconds
(i.e. in the order of 4*2^30) instead of the usual ~4 seconds (order
of 4*2^20).
Signed-off-by: NRamachandra K <ramachandra.kuchimanchi@qlogic.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      7020cb0f
  17. 18 1月, 2009 1 次提交
  19. 15 7月, 2008 1 次提交
  21. 26 1月, 2008 1 次提交
  23. 04 8月, 2007 1 次提交
  25. 11 7月, 2007 1 次提交
  27. 03 5月, 2007 1 次提交
    • J
      PCI: Cleanup the includes of <linux/pci.h> · 6473d160
      由 Jean Delvare 提交于 
      I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      6473d160
  29. 25 7月, 2006 1 次提交
  31. 30 3月, 2006 1 次提交
  33. 21 3月, 2006 1 次提交
    • J
      IB/umad: Add support for large RMPP transfers · f36e1793
      由 Jack Morgenstein 提交于 
      Add support for sending and receiving large RMPP transfers.  The old
code supports transfers only as large as a single contiguous kernel
memory allocation.  This patch uses linked list of memory buffers when
sending and receiving data to avoid needing contiguous pages for
larger transfers.

  Receive side: copy the arriving MADs in chunks instead of coalescing
  to one large buffer in kernel space.

  Send side: split a multipacket MAD buffer to a list of segments,
  (multipacket_list) and send these using a gather list of size 2.
  Also, save pointer to last sent segment, and retrieve requested
  segments by walking list starting at last sent segment. Finally,
  save pointer to last-acked segment.  When retrying, retrieve
  segments for resending relative to this pointer.  When updating last
  ack, start at this pointer.
Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      f36e1793
  35. 26 10月, 2005 1 次提交
    • S
      [IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped · 34816ad9
      由 Sean Hefty 提交于 
      The MAD layer was violating the DMA API by touching data buffers used
for sends after the DMA mapping was done.  This causes problems on
non-cache-coherent architectures, because the device doing DMA won't
see updates to the payload buffers that exist only in the CPU cache.

Fix this by having all MAD consumers use ib_create_send_mad() to
allocate their send buffers, and moving the DMA mapping into the MAD
layer so it can be done just before calling send (and after any
modifications of the send buffer by the MAD layer).

Tested on a non-cache-coherent PowerPC 440SPe system.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
      34816ad9
  37. 09 10月, 2005 1 次提交
  39. 22 9月, 2005 1 次提交
  41. 10 9月, 2005 1 次提交
  43. 27 8月, 2005 3 次提交
  45. 28 7月, 2005 6 次提交
  47. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      由 Linus Torvalds 提交于 
      Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
      1da177e4