i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

i2c_device_id are not supposed to change at runtime. All functions
working with i2c_device_id provided by <linux/i2c.h> work with
const i2c_device_id. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make these const as they are only used in a copy operation.
Done using Coccinelle
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make this const as it is only used in a copy operation.
Done using Coccinelle
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make these const as they are only used in a copy operation.
Done using Coccinelle
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make this const as it is only stored in the type field of a device
structure, which is const.
Done using Coccinelle.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make these const as they are only used in a copy operation or
are stored in the algo field of i2c_adapter structure, which is const.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use the new CEC_CAP_DEFAULTS define in this driver.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use the new CEC_CAP_DEFAULTS define in this driver.
This also adds the CEC_CAP_RC capability which was missing here
(and this is also the reason for this new define, to avoid missing
such capabilities).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Only the first HDMI input has a CEC adapter, so just report 'HDMI 0' as
the HDMI input name.

For the HDMI outputs use bus_cnt instead of i as the output number.
The HDMI name now corresponds to what 'v4l2-ctl --list-outputs' reports.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add support to emulate CEC pin monitoring. There are few hardware devices
that support this, so being able to emulate it here helps developing
software for this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The current CEC pin value (0 or 1) was part of the cec_pin struct,
but that assumes that CEC pin monitoring can only be used with
a driver that uses the low-level CEC pin framework.

But hardware that has both a high-level API and can monitor the
CEC pin at low-level at the same time does not need to depend on
the cec pin framework.

To support such devices remove the cur_value field from struct cec_pin
and add a cec_pin_is_high field to cec_adapter. This also makes it
possible to drop the '#ifdef CONFIG_CEC_PIN' in cec-api.c.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When the adapter is removed the cec_delete_adapter() call attempts
to set the physical address to INVALID by calling __cec_s_phys_addr()
and so disabling the adapter.

However, __cec_s_phys_addr checks if the device node was unregistered
and just returns in that case.

This means that the adap_enable callback is never called with 'false'
to disable the CEC adapter. Most drivers don't care, but some need
to do cleanup here.

Change the test so the adapter is correctly disabled, even when the
device node is unregistered.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/pci/ddbridge/ddbridge-maxs8.c:145:2-3: Unneeded semicolon
drivers/media/pci/ddbridge/ddbridge-maxs8.c:173:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: a43dbe430fb4 ("media: ddbridge: support MaxLinear MXL5xx based cards (MaxS4/8)")

CC: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This Kaffeine's BZ:
	https://bugs.kde.org/show_bug.cgi?id=374693

affects SkyStar S2 PCI DVB-S/S2 rev 3.3 device. It could be due to
a Kernel bug.

While checking the Isil 6421, comparing with its manual, available at:

	http://www.intersil.com/content/dam/Intersil/documents/isl6/isl6421a.pdf

It was noticed that, if the output load is highly capacitive, a different approach
is recomended when energizing the LNBf.

Also, it is possible to detect if a current overload is happening, by checking an
special flag.

Add support for it.

Tested on Skystar S2. Changes respect override_or option so should still work fine
on cx88 based cards which disable dynamic current limit.

Changes since v1:
v2 - fixed incorrect checking of i2c return values
v3 - fix if logic to check if dcl needs re-enabling
   - respect override_or values which aim to disable dcl
   - only do long sleep on overload if dcl enabled
   - add short sleep before re-enabling dcl
   - only check overload and potentially return EINVAL if device is on
v4 - revert v3 sleep logic changes to remove tuning delays
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NJemma Denson <jdenson@gmail.com>

Fixes:
  stv6111.c:665:24: warning: Using plain integer as NULL pointer
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Cleans up smatch warning:
symbol 'stvlist' was not declared. Should it be static?

Patch originally submitted by Colin Ian King <colin.king@canonical.com>,
remainder after the merge of all other stv0910 fixes.

Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

RC_TYPE is confusing and it's just the protocol. So rename it.
Suggested-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSean Young <sean@mess.org>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The 'Press and Hold' operation was not correctly implemented, in
particular the requirement that the repeat doesn't start until
the second identical keypress arrives. The REP_DELAY value also
had to be adjusted (see the comment in the code) to achieve the
desired behavior.

The 'enabled_protocols' field was also never set, fix that too. Since
CEC is a fixed protocol the driver has to set this field.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

CEC needs a keypress timeout of 550ms, which is too high for the IR
protocols. Also fill in known repeat times, with 50ms error margin.

Also, combine all protocol data into one structure.
Signed-off-by: NSean Young <sean@mess.org>
Suggested-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Any protocol for which we have a software decoder, can be enabled. Without
this only the loaded protocol decoders can be selected.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If rc_validate_filter() is called for CEC or XMP, then we would read
beyond the end of the array.
Suggested-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since commit 12749b198fa4 ("[media] rc: saa7134: add trailing space for
timely decoding"), the workaround of inserting reset events is no
longer needed.

Note that the initial reset is not needed either; other rc-core drivers
that don't use ir_raw_event_store_edge() never call this at all.

Verified on a HVR-1150 and Raspberry Pi.

Fixes: 3f5c4c73 ("[media] rc: fix ghost keypresses with certain hw")
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The gpio-ir-recv driver adds timeouts which the saa7134 lacks; this
causes keypress not to arrive, and to only arrive once more IR is
received. This is what the commit below calls "ghost keypresses",
and that commit does not solve the issue completely.

This makes the IR on the HVR-1150 much more reliable and responsive.

Fixes: 3f5c4c73 ("[media] rc: fix ghost keypresses with certain hw")
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The gpio-ir-recv driver does many wakeups (once per edge); the saa7134
driver has special handling to only wakeup 15ms after the first edge.
Make this part of rc-core so gpio-ir-recv also benefits from
this (so a rc-5 keypress now causes 3 wakeups rather than 24).
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

We're reading beyond the buffer before checking its length.

BUG: KASAN: slab-out-of-bounds in wbcir_irq_tx
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This causes out-of-bounds read on device probe.

BUG: KASAN: slab-out-of-bounds in mceusb_dev_printdata+0xdc/0x830 [mceusb]
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This driver cannot send pulse, it only accepts driver-dependent codes.

Cc: <stable@vger.kernel.org> # v3.2
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It adds the remote control driver and corresponding keymap file for
IRDEC block found on ZTE ZX family SoCs.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It adds the dt-bindings document for ZTE ZX IRDEC remote control
block.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The NEC scancode composing and protocol type detection in
ir_nec_decode() is generic enough to be a shared function.  Let's create
an inline function in rc-core.h, so that other remote control drivers
can reuse this function to save some code.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Transmit support in this driver was never tested and based on the code
it can't work. Just one example:
The buffer provided to nvt_tx_ir holds unsigned int values in
micro seconds: First value is for a pulse, second for a pause, etc.
Bytes in this buffer are copied as-is to the chip FIFO what can't work
as the chip-internal format is totally different. See also conversion
done in nvt_process_rx_ir_data.

Even if we would try to fix this we have the issue that we can't test
it. There seems to be no device on the market using IR transmit with
one of the chips supported by this driver.

To facilitate maintenance of the driver I'd propose to remove the
rudimentary transmit support.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

According the coding style guidelines, the ENOSYS error code must be
returned in case of a non existent system call. This code has been
replaced with the ENOTTY error code indicating a missing functionality.
Signed-off-by: NYves Lemée <yves.lemee.kernel@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Document the device tree bindings for the GPIO IR Bit Banging
Transmitter.
Signed-off-by: NSean Young <sean@mess.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Document the device tree bindings for the PWM IR Transmitter.
Signed-off-by: NSean Young <sean@mess.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is new driver which uses pwm, so it is more power-efficient
than the bit banging gpio-ir-tx driver.
Signed-off-by: NSean Young <sean@mess.org>
Reviewed-by: NPavel Machek <pavel@ucw.cz>
Tested-by: NMatthias Reichl <hias@horus.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is a simple bit-banging GPIO IR TX driver.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMatthias Reichl <hias@horus.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Without this patch, an input device is created which is not necessary.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>