Clean up the net/sched directory a bit by prefix all actions with act_.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also make sure the legacy code is only built when CONFIG_NET_CLS_ACT
is not set.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_action_exec only gets a single skb pointer and doesn't own the skb,
but passes double skb pointers (to a local variable) to the action
functions. Change to use single skb pointers everywhere.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Many cipher implementations use 4-byte/8-byte loads/stores which require
alignment on some architectures.  This patch explicitly sets the alignment
requirements for them.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The cipher code path may allocate up to two blocks of data on the stack.
Therefore we need to place limits on the maximum block size.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

After a partial update, the done pointer is off to the right by 64 bytes.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

It is assigned but never read.
Signed-off-by: NDaniel Marjamki <daniel.marjamaki@comhem.se>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reduce the number of comparisons by one through the use of jb/je.
This patch also corrects the comments regarding the different key
lengths.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since the temporary buffer is used as an argument to cia_decrypt, it must be
aligned by cra_alignmask.  This bug was found by linux@horizon.com.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch avoids shifting the count left and right needlessly for each
call to sha1_update().  It instead can be done only once at the end in
sha1_final().

Keeping the previous test example (sha1_update() successively called with
len=64), a 1.3% performance increase can be observed on i386, or 0.2% on
ARM.  The generated code is also smaller on ARM.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch gives more descriptive names to the variables i and j.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The current code unconditionally copy the first block for every call to
sha1_update().  This can be avoided if there is no pending partial block.
This is always the case on the first call to sha1_update() (if the length
is >= 64 of course.

Furthermore, temp does need to be called if sha_transform is never invoked.
Also consolidate the sha_transform calls into one to reduce code size.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As the Crypto API now allows multiple implementations to be registered
for the same algorithm, we no longer have to play tricks with Kconfig
to select the right AES implementation.

This patch sets the driver name and priority for all the AES
implementations and removes the Kconfig conditions on the C implementation
for AES.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is the first step on the road towards asynchronous support in
the Crypto API.  It adds support for having multiple crypto_alg objects
for the same algorithm registered in the system.

For example, each device driver would register a crypto_alg object
for each algorithm that it supports.  While at the same time the
user may load software implementations of those same algorithms.

Users of the Crypto API may then select a specific implementation
by name, or choose any implementation for a given algorithm with
the highest priority.

The priority field is a 32-bit signed integer.  In future it will be
possible to modify it from user-space.

This also provides a solution to the problem of selecting amongst
various AES implementations, that is, aes vs. aes-i586 vs. aes-padlock.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A lot of crypto code needs to read/write a 32-bit/64-bit words in a
specific gender.  Many of them open code them by reading/writing one
byte at a time.  This patch converts all the applicable usages over
to use the standard byte order macros.

This is based on a previous patch by Denis Vlasenko.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change the bit-field in struct cword to unsigned to shut sparse up.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Another reason to use:

	ret = foo();
	if (ret < 0)
		goto out;
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sg_page_malloc should clear the data buffer, not that extent of mem_map.

This fixes Jesper's sg_page_free "Bad page states"
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Get_dvb_firmware script updated accordingly:
- my $url = "http://www.linuxtv.org/~mkrufky/dvb-usb-bluebird-01.fw";
+ my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-blue$Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Clean up a recently introduced spaces vs tabs whitespace problem.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- replace omitted 'TODO:'
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Move the code that patches bluebird firmware before upload from the
generic code into the cxusb driver itself.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add VIDIOC_LOG_STATUS to the radio device ioctl list.
- Reduce the confusion between modes and standards
- Fix stereo reporting for radio.
- Don't set i2c configuration if the chip doesn't support it.
- Fix reporting of current standard for radio.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Implemented v4l2 api for sliced vbi data output
to pass WSS data from userspace to the av7110
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Check capabilities for audio settings (volume, balance,
bass, treble, loudness, mute)
- added loudness support
- added missing VIDEO_AUDIO_BALANCE flags for v4l1 compatibility
- do not call msp_any_detect_stereo for non-autoselect chips to
retrieve the current stereo setting: that will temporarily mute
the sound. It is only needed when the stereo mode might be
changed, and for autoselect msp processors that do not periodically
need to update their stereo setting.
- do not wake up the thread if the standard did not change. Prevents
temporary audio drop-out if the standard is set to the same value.
- fix confused stereo detect code where V4L2_TUNER_SUB_STEREO and
V4L2_TUNER_MODE_STEREO values were used incorrectly.
- stereo mode reporting was broken (v4l2 value used to index a
string array expecting v4l1 mode values).
- do not set dsp register 0x30 in the 3410d thread: that register
does not exist for pre-'G' revision msp chips.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- A new Kconfig option makes the user able to select if the dibusb-mb driver shall claim faulty programmed USB devices which are coming with default Cypress USB IDs.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Some whitespaces cleaned up
- unused code removed
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Indention cleaned for tabsize=8
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Check if in the dvb-usb-device-structure the dvb_pll_desc is set before use.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Indention for values of several request defines were not TabSized=8.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Fixes compiling warning on kernel 2.6.15 with the Intel C compiler. 
- It said drivers/media/dvb/frontends/bcm3510.c(258): 
  warning #592: variable "ret" is used before its value is set
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Replace old norm by the v4l2_std_id values.
- Add code to correctly detect the various capabilities of the
various msp chips. It's not yet used, that's going to be the next step.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- My original settings for this board were incorrect and resulted in
an increased number of signal dropouts.  Replace this with the settings
from the Windows driver.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- codingstyle cleanups & restore some wrongfully deleted dvb-usb-ids
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add support for the remote control receiver inside the DViCO FusionHDTV
DVB-T Dual Digital, and a keymap for the MCE remote bundled with it.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>