blk-mq currently uses percpu_ida for tag allocation. But that only
works well if the ratio between tag space and number of CPUs is
sufficiently high. For most devices and systems, that is not the
case. The end result if that we either only utilize the tag space
partially, or we end up attempting to fully exhaust it and run
into lots of lock contention with stealing between CPUs. This is
not optimal.

This new tagging scheme is a hybrid bitmap allocator. It uses
two tricks to both be SMP friendly and allow full exhaustion
of the space:

1) We cache the last allocated (or freed) tag on a per blk-mq
   software context basis. This allows us to limit the space
   we have to search. The key element here is not caching it
   in the shared tag structure, otherwise we end up dirtying
   more shared cache lines on each allocate/free operation.

2) The tag space is split into cache line sized groups, and
   each context will start off randomly in that space. Even up
   to full utilization of the space, this divides the tag users
   efficiently into cache line groups, avoiding dirtying the same
   one both between allocators and between allocator and freeer.

This scheme shows drastically better behaviour, both on small
tag spaces but on large ones as well. It has been tested extensively
to show better performance for all the cases blk-mq cares about.
Signed-off-by: NJens Axboe <axboe@fb.com>

This allows us to avoid a non-atomic memset over ->atomic_flags as well
as killing lots of duplicate initializations.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NJens Axboe <axboe@fb.com>

Right now we just pick the first CPU in the mask, but that can
easily overload that one. Add some basic batching and round-robin
all the entries in the mask instead.
Signed-off-by: NJens Axboe <axboe@fb.com>

Fix 4 coccinelle warnings.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJens Axboe <axboe@fb.com>

All blk_iopoll functions use iop for parent iopoll structure except
blk_iopoll_complete.This also fixes one kernel-doc warning.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJens Axboe <axboe@fb.com>

We already issue a blktrace requeue event in
__blk_mq_requeue_request(), don't do it from the original caller
as well.
Signed-off-by: NJens Axboe <axboe@fb.com>

Fix format string mismatch in cfq_var_show()
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Refactor the logic around adding a new bio to a software queue,
so we nest the ctx->lock where we really need it (merge and
insertion) and don't hold it when we don't (init and IO start
accounting).
Signed-off-by: NJens Axboe <axboe@fb.com>

It's never been of any use, lets get rid of it.
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_mq_wait_for_tags() is only able to wait for "normal" tags,
not reserved tags. Pass in which one we should attempt to get
a tag for, so that waiting for reserved tags will work.

Reserved tags are used for internal commands, which are usually
serialized. Hence no waiting generally takes place, but we should
ensure that it actually works if users need that functionality.
Signed-off-by: NJens Axboe <axboe@fb.com>

This will be needed for pending changes to the scsi midlayer that now
calls lower level block APIs, as well as any blk-mq driver that wants to
contribute to the random pool.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The blk-mq code is using it's own version of the I/O completion affinity
tunables, which causes a few issues:

 - the rq_affinity sysfs file doesn't work for blk-mq devices, even if it
   still is present, thus breaking existing tuning setups.
 - the rq_affinity = 1 mode, which is the defauly for legacy request based
   drivers isn't implemented at all.
 - blk-mq drivers don't implement any completion affinity with the default
   flag settings.

This patches removes the blk-mq ipi_redirect flag and sysfs file, as well
as the internal BLK_MQ_F_SHOULD_IPI flag and replaces it with code that
respects the queue-wide rq_affinity flags and also implements the
rq_affinity = 1 mode.

This means I/O completion affinity can now only be tuned block-queue wide
instead of per context, which seems more sensible to me anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

If a requeue event races with a timeout, we can get into the
situation where we attempt to complete a request from the
timeout handler when it's not start anymore. This causes a crash.
So have the timeout handler check that REQ_ATOM_STARTED is still
set on the request - if not, we ignore the event. If this happens,
the request has now been marked as complete. As a consequence, we
need to ensure to clear REQ_ATOM_COMPLETE in blk_mq_start_request(),
as to maintain proper request state.
Signed-off-by: NJens Axboe <axboe@fb.com>

This reverts commit 6a3c8a3a.

We need selective clearing of the request to make the init-at-free
time completely safe. Otherwise we end up stomping on
rq->atomic_flags, which we don't want to do.

set->tags should be freed in blk_mq_free_tag_set().
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

nr_segs is no longer used in bio_alloc_map_data since c8db4448
("block: Don't save/copy bvec array anymore")
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

bs is no longer used in biovec_create_pool since 9f060e22 ("block:
Convert integrity to bvec_alloc_bs()")
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_throtl_dispatch_work_fn is only used in blk-throttle.c

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJens Axboe <axboe@fb.com>

Fix new kernel-doc warnings in fs/bio.c:

Warning(fs/bio.c:316): No description found for parameter 'bio'
Warning(fs/bio.c:316): No description found for parameter 'parent'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

The patch basically reverts the patch of(blk-mq:
initialize request on allocation) in Jens's tree(already
in -next), and only initialize req->q in allocation
for two reasons:

	- presumed cache hotness on completion
	- blk_rq_tagged(rq) depends on reset of req->mq_ctx
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Cc: Jörg-Volker Peetz <jvpeetz@web.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

type of set->tags is struct blk_mq_tags **.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Avoid memory leak in the failure path.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Store the pointer to the page there, so we can always safely
reference it from end_io context where ->bio may have been
cleared.
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NJens Axboe <axboe@fb.com>

Since we are now, by default, applying timer slack to expiry times,
the logic for when to modify a timer in the block code is suboptimal.
The block layer keeps a forward rolling timer per queue for all
requests, and modifies this timer if a request has a shorter timeout
than what the current expiry time is. However, this breaks down
when our rounded timer values get applied slack. Then each new
request ends up modifying the timer, since we're still a little
in front of the timer + slack.

Fix this by allowing a tolerance of HZ / 2, the timeout handling
doesn't need to be very precise. This drastically cuts down
the number of timer modifications we have to make.
Signed-off-by: NJens Axboe <axboe@fb.com>

This allows to mirror the blk-mq code flow for more a more readable I/O
completion handler in SCSI.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

We will use this work_struct to requeue scsi commands from the
completion handler as well, so give it a more generic name.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This allows to requeue a request that has been accepted by ->queue_rq
earlier.  This is needed by the SCSI layer in various error conditions.

The existing internal blk_mq_requeue_request is renamed to
__blk_mq_requeue_request as it is a lower level building block for this
funtionality.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add a helper to unconditionally kick contexts of a queue.  This will
be needed by the SCSI layer to provide fair queueing between multiple
devices on a single host.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add a blk-mq equivalent to blk_delay_queue so that the scsi layer can ask
to be kicked again after a delay.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Modified by me to kill the unnecessary preempt disable/enable
in the delayed workqueue handler.
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add two unlinkely branches to make sure the resid is initialized correctly
for bidi request pairs, and the second request gets properly freed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Split out the bottom half of blk_mq_end_io so that drivers can perform
work when they know a request has been completed, but before it has been
freed.  This also obsoletes blk_mq_end_io_partial as drivers can now
pass any value to blk_update_request directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_mq_work_fn() is always invoked off the bounded workqueues,
so it can happily preempt among the queues in that set without
causing any issues for blk-mq.
Signed-off-by: NJens Axboe <axboe@fb.com>

UP or CONFIG_PREEMPT_NONE will return 0, and what we really
want to check is whether or not we are on the right CPU.
So don't make PREEMPT part of this, just test the CPU in
the mask directly.
Signed-off-by: NJens Axboe <axboe@fb.com>

The friendly Intel kbuild test robot reported:

drivers/cdrom/gdrom.c: In function 'gdrom_readdisk_dma':
drivers/cdrom/gdrom.c:605:3: error: 'struct request' has no member named 'buffer'

Convert that from req->buffer to bio_data(rq->bio). Apparently
my grep missed this one, and I don't build for Sega Dreamcast
enough.
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of setting the REQ_QUEUED flag on each of them just take it into
account in the only macro checking it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>